...lil' something YOU need to check, like NOW! 6.7 Powerstroke
ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2024
- I HATE ZIP-TIES • this is WHY I hate aft...
2017-2022 - EVERYONE with a 6.7 needs to go check this CONNECTOR, NOW! GO, LOOK NOW. Takes 10 seconds. Whhhhhhat up DIESEL gang?!? This is the 1st 2022 that I had to fix but have done 17-19s a few times. Fortunately, we were able to get a Ford wiring pigtail to save the day. Follow along and WATCH THE PROPER WAY TO REPAIR THIS PROBLEM. THANKS so much for watching each weeks episode, means a lot. Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE #fyp #superduty #commissionsearned
Join this channel to get access to perks:
/ @powerstroketechtalkwarod
Need something you see me use, I probably got it on Amazon. Use my link below to get PTT tools
amzn.to/3wGaElA
USE STORE CODE pttwarod-20
*****************************************************************
Check out our coffee LINE!!!!!!👈👈👈👈👈👈👈👈👈
society-of-auto...
*****************************************************************
To get hooked up like PTT please check out this link!
You won't be disappointed, I wasn't...trust me, ALL worth it!
****** www.limitlessau... ******
**********************************
CHANGE YOUR Rear End FACTORY FLUID HERE!!!
• FORD Superduty - Rear ...
Check out these other 6.7 Playlists!!
6.7 Oil Seals Replacements
• FORD 6.7 Oil Leak Repa...
6.7 Turbo Videos
• Ford 6.7 Powerstroke T...
6.7 Repair Videos
• FORD 6.7 Powerstroke R...
6.7 Engine Light Videos
• FORD 6.7 ENGINE LIGHT ...
6.7 Maintenance Videos
• FORD POWERSTROKE MAINT...
Check out my Instagram & Facebook
@PTT_W_AROD / Aaron Power Stroke
Business Inquiries: powerstroketechtalkwarod@gmail.com
Wanna send me something P.O. Box 531458 Livonia, MI 48153
Music: ------------------------------
Slynk - TH-cam Audio Library
------------------------------
To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.
Thank you AROD for the effective and efficient repair on my 6.7 long boiii. Looking forward to the S&S and Banks install!
There he is!!! I knew you'd see it 🤌😎🫡
Seriously looking at Banks Derringer and iDash, possibly the pedal monster too but have FMC 3 / 36 premium care warranty. Will that void it?
No
Hey bud call me
I shot dielectric grease into every connector on the underside of my 2017 within the first year of ownership. It was the connectors at the rear bumper that prompted me to do that, but I kept going all the way to the front bumper. No issues with connectors. I will say that some of the connectors are a huge PITA to disconnect.
Thank you, again! Couple months ago while raining my truck started ringing at me as if my phone was ringing, only it wasn't my phone and nothing would shut off the ring until I shut off the truck. Couple weeks go during another heavy rain, my mirrors stopped autofolding. I splooged dielectric grease in that connector by rear bumper and no more electrical gremlins....for now.
Twisted pair wires to the connector are for noise immunity and should be left twisted when possible, probably doesn't matter 4 the short run 2 the new connector, very important 4 long wires runs, nice repair
The Adam Sandler reference. The goat! 🐐 😂
You’re a good technician. All that attention to detail most wouldn’t do any of that.
Another fine repair 👍👍
I still don't know why certain plugs the factory doesn't put dielectric grease
That's my question, it would've helped in this case.
@Bill Babbs they probably save millions during builds and then how many things fail after warranty is up
Believe me they have it worked out to an advantage
Going to dielectric grease mine this morning because my 85k investment is hopefully long term as I love my beast
Good information
Seen this a time or two. Usually it’s the rubber seal ring or the connectors internal seals for the individual pins. Personally, I just went ahead and used XG-12 on most of the underside connections. Cheap insurance.
On 17-19 trucks, the DEF module has a lower access hatch. For those submerging your vehicles or driving in highly wet conditions I’d advise you open the hatch, carefully disconnect the connections and add a bit of XG-12 to those connections.
Beautifully done video
Thanks Arod.....I have a 22...just put dielectric grease on it and plugged it back in....fingers crossed
Great repair! Your biology teacher would be very proud of your surgical skills!
Loved the talking goat reference! 😂
Lmao, some1 knew!!!!
@@PowerStrokeTechTalkwARod you f'n whizzed that thing. I didn't know you were gonna button hook me. Lol I think I'd have fun working with you. Lol
I cannot see you, come closer
@@PowerStrokeTechTalkwARod is it weird that I hear the voice reading this?🤣
Nice work as always 😀😀❤
Any possibility to just trim back the wires and re-pin them ? Or is there special tooling needed that may not be easily available to crimp in new pins
Hey ARod
Really nice job on that repair
Have you ever tried the connectors that have the solder and shrink wrap in one
If so let me know what you think of them
There is no crimping needed
When I first seen them I was
a little skeptical but after trying them I was very surprised how well they hold.
I have been using them for awhile now i actually
used them today
On a transmission harness plug that was broke
The one that goes to the solenoid pack
I was able to get a new pigtail
and staggered the splices used those solder connectors
And an additional section of shrink wrap on each one just for a little insurance
Then wrapped it in the Loom
And a few pieces of electrical tape and it looked OEM
I like that little pick tool you have to cut the electrical tape in the wire loom. What is that called? Does the hobo freight carry that?
You da best!
I'm going to order some of the XG-12 and crawl under my truck to check all these damn connectors... I'm sure I'll find some dry bois... Thanks for the video PAL!
Was juss thinkin bout you yesterday
@@PowerStrokeTechTalkwARod Aww, thanks pal, I'll have to hit you up one of these days... Been super busy with work/life... You know the deal... I want to try and find some time for new YT content on my channel, something like, "n00b 6.7 Powerstroke owner" lol!
So would it be advisable to pull under body connectors and hit them with grease.
I have a 22 with 5k on the meter and if I can get ahead of problems I rather do that
@@jeffconley819 I've got almost 20k on my '21 and I'm going to be doing this for sure!
My 22 just had this done. Same issue 2 times only 10k miles
Found same issue with a MY19 PM sensor
Nice...
Where has that snap-on seam ripper been my whole life?!!
6.0 and 6.4 guys smiling when they see the "reliable 6.7" engine 🤣🤣
Replace the push pin it's not your truck
With shortages these days, might not be a bad idea to keep the old pins for spares, if you can. Maybe I'm a hoarder, but I always had a junk drawer with specialty connectors, fasteners, plugs, etc., saved my own and my coworkers' bacon quite a few times when new replacement parts weren't readily available.
Hence why I THROW zip away
And it's at that last step of the harness repair when you realize, oh sh*t!!! I have the connector upside down!
That has absolutely no bearing on thos repair
@@PowerStrokeTechTalkwARod Maybe not, but I sure thought it was funny 😄
"Better knot mention that again" was from Adam Sandlers... The Goat
Replace the plastic push pin junk with a real live metal fastener , these nice 100k trucks come with cheesy junk all over them
I love my 6.7 but have to tailor some annoying half assed crap all the time
Hey brother thanks as always... is there a way for owners to look at TSBs, etc.?
Yepp, motorcraftservice.com
Hey ARod.
I need some advice
getting ready to replace my 2002 f550 7.3 powerstroke
And having a hard time deciding on what engine option would be best
For 2023 f550 supercab 192 WB. I don't tow very often but
I am usually maxed out on gvwr. I make continuous short trips all day hauling dirt and rocks from the local pit to the job. Just a little concerned
That i will have problems with emissions due to the way i will be driving. What do you thinking?
Lets talk email me
Replace the pushpins
I better grease my connector now. ‘22 with 12k
Do it
Just dielectric or do you recommend something else?
XG-12 at your dealer. Great stuff
I prefer to cut and repair the twisted wire pair first and re-twist. Then repair remaining wires, makes a "factory looking" repair.
🤣🤣🤣
Just got a 2022 king ranch and am needing some for scan work done. How do i get in touch with anyone to help with that?
Powerstroketechtalkwarod@gmail.com
I had that just happen thats the def low light
Yup
Love you elderberry
@@PowerStrokeTechTalkwARod did you get it
Noiooope
Weird, a lot of that stuff fell off when I was driving down a dirt road.
My 22 KR Tremor has been at the dealer for 15 days for a P2206. They replaced the NOx sensor but are still having an issue. Wonder if you/'re findings here are relevant.
Let me take a crack at it, wanna wait
@@PowerStrokeTechTalkwARod Wish I could find a Ford mechanic half as thorough and knowledgeable here on the Gulf in Texas . So far I've been very disappointed.
How can I get the codes for forscan on my 22 f350 lariat wanting to have it display coolant temp on the gauge and be able to see the particulate filter %, and to be able to add a front grill camera. Thank you
Powerstroketechtalkwarod@gmail.com
Why didn't you just leave the spare connector in place and tape the pigtail up under of your repair, instead leaving it open? I would rather replace with a new pin instead of the whole connector, it's as much trouble to do so it that way. I don't like cutting up the factory harness, but that's just me, I'm funny about that kind of repair. I've had bad experiences with repairs at the my local Ford dealer, so now I do all of my own repairs now..
Warranty repair
Mine did same thing 2022 only had 2500 miles on it. I put dielectric grease in connection and have had to do same with other connections.
I would use new clips, you don't know the next time you will be working on it.
New push pins please
So, what does not having that final particulate sensor do for the longevity of the dpf? Did Ford change the regen logic?
Yes just for those VIN'ed trucks
You should use the motorcraft electrical grease not dielectric. Dielectric is made to carry high voltage and high current and can actually block the 2.5 ish volts or so traveling on the network circuits. Ask me how I know lol 😂. In other news that’s been happening to nox11 since 2017 ya think they’d have gotten that under control by now.
Where can i get some of those push pins
The dealer
I have no module to disconnect and grease, why, i have a 6.7 but i dont see one,😊
My truck is missing the big exhaust and wires fell out on the highway somewhere never could find it
Bummer
Plastic electrical tape? Super ghetto...
Next time all that racket begins just stop recording. There was no way anyone could understand your explanations. I kinda missed the point.
Do yall work on these things??? th-cam.com/video/dFPPU3byd8E/w-d-xo.html