Earthworks Laser Catcher Digging a Slope
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Trimble Earthworks Laser Catcher Digging a Slope
In this video, SITECH Intermountain demonstrates how to use the Trimble Earthworks Laser Catcher to dig a slope. The Laser Catcher is a simple and affordable way to improve the accuracy and efficiency of your excavation work.
To use the Laser Catcher, simply attach it to your excavator's arm and align it with the laser level. Once the Laser Catcher is aligned, the operator can use the Trimble Earthworks software to enter the desired depth and slope. The Laser Catcher will then provide real-time guidance to the operator, ensuring that the excavator is always digging to the correct depth and slope.
The Laser Catcher is a great way to improve the accuracy and efficiency of your excavation work. It is easy to use and can be used on any excavator. The Laser Catcher is also a great way to improve safety on the jobsite. By ensuring that the excavator is always digging to the correct depth and slope, the Laser Catcher can help to prevent accidents and injuries.
Improved accuracy: The Laser Catcher provides real-time guidance to the operator, ensuring that the excavator is always digging to the correct depth and slope.
Increased efficiency: The Laser Catcher can help to save time and money by reducing the need for manual measurements and adjustments.
Improved safety: The Laser Catcher can help to prevent accidents and injuries by ensuring that the excavator is always digging in a safe and controlled manner.
If you are looking for a way to improve the accuracy, efficiency, and safety of your excavation work, then the Trimble Earthworks Laser Catcher is a great option
Great video
Very informative, thanks for taking the time to make this video
No problem. Thanks for watching
I have 2D with the laser catcher. So lets say you put in a cross slope of say 2% (both the laser and machine)along with your +2% main fall and you had to dig that trench 4 buckets wide. Can you turn the machine but moving the undercarriage and dig some to the right instead of digging one bucket wide trench backwards then coming back and digging 3 more the same way. If you turn and dig, is machine going to give you readings for the main fall slope because you are pulling the boom back towards the machine? I guess the question is, what is the best way with 2D with the laser catcher dig with both main fall and cross slope?
Yes sir it is possible. Think of the laser beam off the laser as a reset button every time you catch it to reset what elevation it is falling at both main fall and cross slope. So you would align the excavator with the main fall you want to dig and then on the top of the screen you have both options. One to enter the main fall. The other to its side is to set a cross section or side slope. Once you have set down on a start benchmark for elevation and have entered your slopes and have also set the laser properly with those slopes in line with the main fall dig, then catch the laser beam. Then dig dig dig and then when you back up, re catch the beam and it will reset at the beam as it is falling and that’s how it will know how to stay on grade. I hope that made sense.
That is what I thought but I was concerned that if I turned the machine to dig to my right that it would do the positive 2%that I had set for my main fall. Like when I use measure mode I can only measure boom in boom out up and down it doesn't calculate if I turn the cab. I have a pond job that is wide open I can mess around with it more. Normally I am just digging single sloping trenches as you demonstrate in the video. One day when I am all growed up I will get gps.
And I will say I will never own another machine that doesn't have earthworks on it. It has increased my productivity and decreased the getting in and out of the machine or calling the ground guy over. And almost completely eliminated rework and the rework that their is always operator's error😂
Thanks again for taking the time to make these videos and responding to questions
@@JeffLarsen-iz8qk what makes this heading bench possible in the next gen cats and is it possible to get the same sensor(?) added to my trimble 2d with laser catcher?
th-cam.com/video/_nJluYr39FU/w-d-xo.html
@@JeffLarsen-iz8qk I posted this a couple of days ago, but it disappeared.
th-cam.com/video/_nJluYr39FU/w-d-xo.html
What would it take to achieve this with my 2D with laser catcher ? A sensor?software update?
So can you explain in more detail what is happening with a flat rotary laser when you set a slope in the machine with 2d? It’s only accurate as far as you can pull?
Yes. So if you set the laser to a slope, lets say 2 percent in one direction like in the video, it needs to be in the same direction as you are digging. The machine in 2D is only as good as the undercarriage does not move once you have benched and caught the laser, so if you catch the laser and then did backwards at that slope the machine has to be told inside that you are also digging at a 2 percent or it will just catch the laser and then did flat or assume flat. Also, every time you move the undercarriage or track back to did more, the elevation or reference to the laser is null. You must move, then catch the laser again which will then re reference where the beam is in relation to you and it starts over again and the machine still needs to have the 2 percent in it or it may tend to do a bit of what I call a stair case as you did back. But you are correct that you are only accurate as far as you can pull until you move and re refence the laser. Hopefully this makes sense.
If you set a slope in the machine while the laser is flat, it will cut a slope, but every time you catch the laser again it will reset you back up to that level and you will have a stair case effect. So yes it will only go as far as you can reach that time.
Makes sense, thanks, I tried using it for 200’ of sewer and had a really hard time lol, now I know why. Glad you’re making these videos since there’s not much training when one purchases these products
I am glad that this has helped. I know that I am covering many different ways to use these products, but hopefully it gets people thinking also.