Upgrade Marlin 2.0 firmware on ANET A8 v1.0 Board
ฝัง
- เผยแพร่เมื่อ 4 ธ.ค. 2019
- How to upgrade Marlin 2.0 Firmware on an ANET A8 v1.0 board without running out of memory space.
With Marlin 2.0.7.2+ you will need to use VSCODE with PlatformIO and Auto Build Marlin plugins installed to compile Marlin.
ANET A8 Board Definitions
github.com/SkyNet3D/anet-board
Reduce the size of Marlin Article
thborges.github.io/blog/marli...
My Configuration.h, Configuration_adv.h, and _statusscreen.h files I use to configure my ANET A8 v1.0 board.
drive.google.com/file/d/18pQa... - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 61 | คู่เอก "เพชรสุขุมวิท vs ดวงสมพงษ์"](http://i.ytimg.com/vi/edA1HvEyxh8/mqdefault.jpg)
Thank you so much! I was getting very frustrated trying to get 2.0 on my Anet A8. Very clear tutorial.
I just upgraded my Anet A8 V1 to Marlin 2 with a bltouch and linear advance set up.. had 150 bytes remaining... Printing stuff now... Thanks for the Vid..
This is one of the most clear-cut, step by step tutorials I've found. Thanks!
Thank you so much!
I had try so many tutorials and it wasn't working
this one worked!
Very clear directions, I was able to flash my board in minutes once I watched your video thanks..
Thanks for making this video, it would have been a tricky problem to solve without your insight. Thanks!
Very helpful. Thank you for the video. With this video I was able to install Marlin 2.1.2.1 in my old Anet A8
you are the best king of anet :D Thanks a bunch!
I got Err: EEPROM version. Thank you for the vid
For anyone who runs into this issue, there is an easy fix: Go into the menu on the printer, then to "Configuration" > "Advanced settings" > "Initialize EEPROM". Select "Init" using the up or down buttons, and press the middle button to confirm. If done correctly, it should just take you back to the info screen and you will no longer get that error message when starting the printer.
@@coleh1792 how do I get to the menu of the printer?
Did you notice that your handle is a anagram of Dabrudda ? :-)
you are an holy man! thank you
May we see it printing some tests and compare it to 1.1.9? Or csn you share some experiences, if it’s started to work busy?
Cara você salvou a minha vida, estou amuito tempo tentando sulocionar esse erro para atualizar minha Anet pelo arduino. Muito obrigado! Que Deus te Abençoi!
Fala Irmão, blz? Mano, funcionou pra vc? Tô com um receio danado porque minha placa não tem nada escrito sobre a versão.
thx mate.
I would love to know why for every vid on Marlin FW for the Anet A8, do I see different headers names appearing in the Arduino IDE
which config file i taken from example for my Tronxy P802EA ??????
thanks
I've just printed 4 jobs on an A8.
I've always had problems with this printer in fact the first time I've printed with it was yesterday - but I installed Marlin Firmware (1.1.9) - and it now ignores small steps (microsteps?) on circles effectively putting flat sides on circles.
1. The G Code looks good when I step through it (written on Slic3r) the round edges are there.
2. The G Code uses "G1" notation in all steps were X,Y,&E are stepped.
Is this a known fault with Anet A8 + Marlin 1.1.9 Will Marlin 2.0 fix this?
u need the microsteps. a full step is 1.8 deg of a circle of rotation of a motor. with original drivers i think u get 1/16 step, after market can go to i think 1/256 step. the smaller the step , the more detail (and longer print times). Hence the flat spots, the program jumped the steps to produce the full circle and took out 15/16 of it to jump the microsteps. What drivers are you using in Marlin? And what board and version of the board are u using? that has all the details why u are printing that way.
guys i have a prbm,i can print with cura but with simplify3d i cannot conect to any port /any ideea?
all of those folders you clicked for the platform.local.txt file i dont have. Im trying this can you give more detail/help?
Hi,
I have Anet A8 board Melzi 2.0 v5. display anet LCD 2004 tell me how to flash and where to get the firmware! thanks to all
Arduino: 1.8.13 (Windows Store 1.8.39.0) (Windows 10), Board: "Anet V1.0 (Optiboot)"
sketch\src\module\motion.cpp:77:71: error: 'X_HOME_BUMP_MM' was not declared in this scope
#define XYZ_CONSTS(T, NAME, OPT) const PROGMEM XYZval NAME##_P = { X_##OPT, Y_##OPT, Z_##OPT }
^
sketch\src\module\motion.cpp:83:1: note: in expansion of macro 'XYZ_CONSTS'
XYZ_CONSTS(float, home_bump_mm, HOME_BUMP_MM);
^
sketch\src\module\motion.cpp:77:80: error: 'Y_HOME_BUMP_MM' was not declared in this scope
#define XYZ_CONSTS(T, NAME, OPT) const PROGMEM XYZval NAME##_P = { X_##OPT, Y_##OPT, Z_##OPT }
^
sketch\src\module\motion.cpp:83:1: note: in expansion of macro 'XYZ_CONSTS'
XYZ_CONSTS(float, home_bump_mm, HOME_BUMP_MM);
^
sketch\src\module\motion.cpp:77:89: error: 'Z_HOME_BUMP_MM' was not declared in this scope
#define XYZ_CONSTS(T, NAME, OPT) const PROGMEM XYZval NAME##_P = { X_##OPT, Y_##OPT, Z_##OPT }
^
sketch\src\module\motion.cpp:83:1: note: in expansion of macro 'XYZ_CONSTS'
XYZ_CONSTS(float, home_bump_mm, HOME_BUMP_MM);
^
exit status 1
Error compiling for board Anet V1.0 (Optiboot).
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
i got this error how to clear it
How to solve this error
Ensure you have Optiboot selected from the Tools menu when updating the firmware. Your Arduino has the Optiboot loader installed rather than the normal boot loader.
Can you please show us how to do this for Ender 3? does it need any extra hardware? thanks
Not sure what board an Ender 3 has. If the board doesn't have a USB connection then you might need a ICSP cable.
Im Getting error while detecting libraries included by C.//XXXXXXXXXX someone help :(
Why the Z Safe homing? It's super weird and annoying that the extruder moves to the center of the X / Y while homing now. I disabled it again cause if one print stops due to some annoying reasons you can't home anymore.
Z Safe Homing raises the print head a defined amount to prevent the print nozzle from gouging and dragging across your heat bed because when you first start homing the printer does not know the height of your Z. Raise the head 5mm, home X & Y, then go to the center of the bed and home Z. Without Z Safe Homing you will crash the nozzle eventually.
And if a print stops due to an error I usually end up reprinting the entire part anyways.
@@MrDabrudda True, Z Safe homing is safer for the extruder. I was printing a 10 hour print job though that stopped after 8 hours... ended up re flashing Marlin without Z Safe homing and then finished printing the part.
Now I re flashed Marlin again with Z Safe homing cause I think it's better for the extruder.
Thanks a lot for your video!! =)
Have you a configuration file for 2.0.1 with Bad auto leveling?
You only need to enable the bed leveling in the configuration.h file by uncommenting the line
@@MrDabrudda just enabling doesn't work, i had to define fix mount, set the distance between nozzle and probe (but i cant get auto leveling working, i add the min_edge_probe_left/right/back/front and still doesn't work)
when i press auto level, it does homing and it stays there like if it where finished
anyone help?
I managed to get 1.8 with auto bed levelling (bltouch) enabled with flashing the Optiboot bootloader without disabling anything.
It makes the start far quicker
It was an awful faff to do as the USBASP USBISP AVR USBasp_H6 Programmer I used to do it doesn't put the correct drivers on for windows by default.
I did, Mr Darbudda 😁
so i followed along with you but i have different version of Arduino. I am running 1.8.13 . I mad the changes that you did and hit the check mark button. I clicked the check button and its compiling but nothing seems to be happening.
With Marlin 2.0.7.2 you will need to use VSCODE to compile Marlin. You will need to install PlatformIO and Auto Build Marli.
@@MrDabrudda thank you
The V1.0 board is kind of hard to come buy now. There is the V1.5 board, and another "3D" board "out there." What about those boards and Marlin 2.0?
I don't have any other version of the A8 board. The Marlin build process is exactly the same for any compatible board. I have an SKR v1.1 board with TMC2208 drivers that I am setting up and eventually will make a video on the print quality of the old A8 (16 steps per mm) board vs the 32-bit board (256 steps per mm)
there's a V1.7 board now with better power connection and a fuse on the power
brian whittle yep, I have that one working.
I haven't tried Marlin V2 yet, but Marlin V1.x worked fine on my Anet 1.7 board. It's the same AVR microcontroller so it shouldn't matter.
THe "new" boards have the same amount of memory, so this fix is still valid/needed.
Marlin 2.0 for ANet A8 - I tried to compile it last night and just now, and it's got compile errors on macro.h - is this common? Easy fix?
What are you using to compile the firmware? Arduino IDE, Atom, or VS?
@@MrDabrudda Arduino IDE - I've put VS(C) on now and will try again.
Ok, so looks like I've compiled, once I removed the .html files that "somehow" got saved instead of github's .h file (hint: don't do right click, "save link as"...)
I use Arduino IDE and you need to click the Clone or Download button on the right side of Github to download the zip file.
I upgraded to Marlin 2.0 but same problem as in 1.9.1 the x axis goes past the bed, I checked the code and it says the limit is 220 which is correct but this is very frustrating and I can't find an answer anywhere.
EDIT: when auto home set to middle, x axis says it is at 110 but it is actually at 130, and y says it is at 110 while it is actually at 105
Does Anyone know how to fix this problem I have been at it for months
Are you using a bed probe? If so make sure the probe offset is set in the Configuration.h. Also check the limit switch offset settings.
Just 1 question what lcd do you have on your A8 ????
The default Anet A8 display, 2004 LCD.
@@MrDabrudda I've a stock anet a8 with the 5 button lcd and impossible to make buttton work properly with latest marlin 2.0 hotfix. But with latest 1.0 bugfix (1.1.9.?) it works. Very strange. I use vscode + platformio (latest). thanks
Which version of the ANET A8 mainboard do you have? I have the v1.0 board.
@@MrDabrudda Anet3d V1-5
Check out this video from Crosslink and follow the steps.
th-cam.com/video/38PkynA1uGI/w-d-xo.html
And review this site.
caggius.wordpress.com/anet-v1-5-1-7-board-on-marlin-2-0-5-3/
anyone know what this is?
Arduino: 1.8.15 (Windows 10), Board: "Anet V1.0"
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\screens.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\archim2-flash\flash_storage.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\archim2-flash\media_file_reader.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\advanced_settings.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\confirm_home_e.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\confirm_home_xyz.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\main_menu.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\printing_dialog_box.cpp:23:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
In file included from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\compat.h:31:0,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\config.h:24,
from C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ftdi_eve_touch_ui\bioprinter\status_screen.cpp:24:
C:\Users\jonat\Desktop\3D\printer\Marlin-2.0.x\Marlin-2.0.x\Marlin\src\lcd\extui\ui_api.h:82:15: error: 'MarlinBusyState' in 'class GcodeSuite' does not name a type
GcodeSuite::MarlinBusyState getMachineBusyState();
^~~~~~~~~~~~~~~
exit status 1
Error compiling for board Anet V1.0.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Are you using Arduino IDE or VSCode to compile the firmware. VSCode works while Arduino IDE will no longer compile the firmware.
@@MrDabrudda thanks ill try vscode
So I was just going to download your config files, and suddenly they're in your trash can?
The file has been restored. I don't use Marlin any more. I installed Klipper.
i think this video is fake.merlin software Aneta8 v1.0 never installs on motherboards..never loads even though i tried all kinds of variations.No software is installed except the orginal hex file
How would this video be fake? You see the version # on my printer. If you are trying to update to version 2.0.7.2 you will need to use VSCode and search for videos on using VSCode to update to the latest version.
@@MrDabrudda see anet a8 v1.0 version motherboards 8 bit.why don't you say set the config files to 8 bit.you are giving people incomplete information.You suggest installing a 32-bit version on an 8-bit motherboard.please give correct information..you prepare 8bit file and give it to people..
Marlin 2 works on 8 bit and 32 bit boards. That is what the board definitions are for, to define the hardware on the board.
@@MrDabrudda It is the general software offered by merlin software. You have to customize it and install it on your motherboard.You have to make special settings for it to be 8 bits..in merlin general anet a8 setting you have to make custom setting.For example, you should disable the sd card and run a printer from the pc with the usp port..To save space on an 8-bit motherboard..please upload the software you installed on your anet a8 motherboard here.tuned software.The config file for merlin anet a8 is never loaded.
Do you have the ANET A8 v1.0 board or 1.5? I will also upload my Configuration.h and Configuration_adv.h files which I used to configure my ANET A8.
I follow this but failed at compile, my anet is v1.0 and , I can upload the firmware file (ino.hex) using AVRDUDESS.exe with Braud rate 57600, and I follow th-cam.com/video/38PkynA1uGI/w-d-xo.html to create my own marlin compiled file but you have to find out the file and upload with the AVRDUDESS, hope this help the other who is facing the same problem.
Marlin 2.0.7.2 will not compile in Arduino IDE any more. Use VSCODE with PlatformIO and Auto Build Marlin.