P0010 Code - Intake Camshaft Position Actuator Solenoid Control Circuit
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2024
- P0010 Code - Intake Camshaft Position Actuator Solenoid Control Circuit
|Code P0010 Possible Causes
NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
Dirty Oil
Low engine oil level
Faulty Intake Camshaft Position Actuator Solenoid
Intake Camshaft Position Actuator Solenoid harness is open or shorted
Intake Camshaft Position Actuator Solenoid circuit poor electrical connection
Faulty Engine Control Module (ECM)
|What are Code P0010 Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
|Code P0010 Description
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to the Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle to a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation. - ยานยนต์และพาหนะ
good job keep it up
Good sir aisa multi meter or prog kha sy mily gi
@@pagalprince4302 online
@@automotivetechnician921 kn c website
Md muslim uddin Bangladesh Dhaka good vi