If the miss alignment is only small (say a fraction of a click) one other option is to pop the bezel off and warm up the glue under the insert using a hair dryer. Once the glue is warm you can use your thumbs to move the insert a little. Then it cools down and resets in its new position. That’s the method I’ve used on two Seiko prospex’. Worked perfectly
Great video. After watching this, I honestly feel like I'd be able to confidently give this a go myself. I love learning how to do these things myself and video's like this are great for that. Thanks.
Helpful video, very clear to follow. It's such a shame Seiko can't do it right the first time. Genuinely has completely put me off buying any more Seiko's, too many bad experiences with this alignment nonsense.
yes dude! that glue is the key... so you can micro adjust after you put it on. thanks, I have to do a deep blue bezel now. i dont understand why these companies cant do it. they have excuses like, "well, its only a $200 watch... what do you expect?" i freaking expect you to do your damn job after I give you the $200 bucks, thats what i expect. man...
Easiest method is to put the watch face down in a solvent like Grip Solvent which is used on golf clubs, but I'm sure there are others. Put a small amount in a glass or even a plastic cup as it won't dissolve plastic, just enough that the bezel is immersed. It will remove the double sided tape but not degrade gaskets. Leave it for a day and the insert pops right out. No need for tools that can potentially damage the case. Clean off the old tape residue and then replace the bezel as you've shown. I think Marc at Long Island Watch might have made a video on it. Either way it's a far better method than removing the bezel unnecessarily.
Hi, I am curious about the cement - will it not bind the bezel with the insert permanently? What if I want to service/replace the bezel insert later on?
I think its because they are one of the biggest watch manufacturers in the world, Time is money so being many of there watches are under a 1k they don't have the time to check them correctly thats why bezels are misaligned and timekeeping cant be all over the place
Seiko is going to have Lucas electrics style jokes formalised. “What do you call a Seiko that lines up correctly”? “A fake”. Or “How can you tell your Seiko is authentic”? “When it’s movement is all over the place and there is dust on the dial”.
@@ClickSpringReview если у вас есть старая прокладка вы не могли бы положить её в спирт и посмотреть я думаю вряд ли спирт повредит прокладку резиновую, мы бы открыли новый способ как переклеивать накладку не снимая безеля)))
I know its only small Tony but if its your only watch you look at it every day and everyday it stares you face at they couldn't get it right , Bit like having a picture on the wall which isn't square and of to one side, just no I say lol
Nice work but of course Seiko should have aligned the thing in the first place. My Arnie is bang on, as was my Shogun but my Turtle is a gnat's chuff off. Not enough though for me to follow your example. Seiko really need to check their QC and regulate their mechanicals but seemingly, they're not too bothered.
Стыдно такая компания тоже купил часы king turtle seiko, и тоже разметка не совпадает это конечно караул отправил их по гарантии нам переслали письмо у вас всё в порядке всё отлично Так и должно быть типа, Вот думаю так же сделать только здесь керамика и так просто наверное надавливать её нельзя она может и треснуть (((
LOL, you make things difficult for yourself. Simply poor boiling water over the bezel. This softens the adhesive. Then with some pressure push the insert. I have done it several times, and it works a treat. PS your sound went at 7.00
Did you do remove the bezel first before pouring boiling water then pushing the insert? Or did you pour boiling water on the bezel while it is in the watch then pushed it?
It was over to the1 o'clock side you can see at the start of the video, the owner asked me to fix it for him as it was driving him mad, PS I have another Laco review coming out again next week
Where was the miss alignment? You must have super humen vision if you can spot that. Honestly this constant chase ufter unrealistic perfection is really making me sad for our generation.
Come on its not unrealistic just look at every other watch brand they seem to get it right, Its so bad with Seiko that we all joke about it now, if its not miss aligned its not a real Seiko
@@ClickSpringReview you guys have something to say on every brand and usually you are just repeating what other reviews are saying regardless if you actually had the same problem or not. With seiko it's miss alignment , timex is too loud , omega 's decompression nob , casio's resin cases vs metal, tudor poor man rolex, invicta don't even let me started, g shock too big, rolex overpriced, San martin unoriginal. Give me a brand name and I'll tell you what kind of complaints you gonna hear about in a review before even watching it.
You obviously don't know my channel very well, I'm nothing like what you say, ask any and I do mean any of my subscribers this, Yes I have spoken about misalignment issues with Seiko that because some of the ones I own and reviewed have been, or would you prefer if lied to you about this ? Unlike 99% of watch reviewers I'm a working clock & watchmaker and reviewed everything for £35K Rolex to the new Citizen Forza because I love watches, price doesn't come into it
@@ClickSpringReview the promasters have applied markers and are more well done overall as well as iso sertified divers, also half the price and impossible finding one with a missalined bezzle. The movements preform better too.
Если честно больше ни на одних часах я такого не видел я даже не мог подумать что такое может быть в часах это же не грабли не не совок это часы как такое можно делать позорище блин, у меня был Самурай сделанный в Японии там всё чётко было вообще а это вот шейка королевская черепаха сделана в Китае и тут просто трэ
![แค่บอก - Atom ชนกันต์ [OFFICIAL MV]](http://i.ytimg.com/vi/kgwhtg8bAxY/mqdefault.jpg)
Now you have corrected it no one will believe it’s a real Seiko.
So true LOL
LOL
🤣
Swiss made counterfeit
This is normal for Seiko 2 years on and its still the same
If the miss alignment is only small (say a fraction of a click) one other option is to pop the bezel off and warm up the glue under the insert using a hair dryer.
Once the glue is warm you can use your thumbs to move the insert a little. Then it cools down and resets in its new position.
That’s the method I’ve used on two Seiko prospex’. Worked perfectly
Thats a good idea Lee 👍🏻
Great video. After watching this, I honestly feel like I'd be able to confidently give this a go myself. I love learning how to do these things myself and video's like this are great for that. Thanks.
Always glad to help Alan 😊
Helpful video, very clear to follow. It's such a shame Seiko can't do it right the first time. Genuinely has completely put me off buying any more Seiko's, too many bad experiences with this alignment nonsense.
Glad you found it useful Sir , Seiko QC could be better thats for sure
yes dude! that glue is the key... so you can micro adjust after you put it on. thanks, I have to do a deep blue bezel now. i dont understand why these companies cant do it. they have excuses like, "well, its only a $200 watch... what do you expect?" i freaking expect you to do your damn job after I give you the $200 bucks, thats what i expect. man...
Exactly Lewis there is no excuse for it 👍🏻
The issue isn’t exclusive to $200 watches, I’m here after buying a $1300 seiko with horrible alignment
Yep its across the broad with the brand
У нас в Украине они стоя 600$(((
Easiest method is to put the watch face down in a solvent like Grip Solvent which is used on golf clubs, but I'm sure there are others. Put a small amount in a glass or even a plastic cup as it won't dissolve plastic, just enough that the bezel is immersed. It will remove the double sided tape but not degrade gaskets. Leave it for a day and the insert pops right out. No need for tools that can potentially damage the case. Clean off the old tape residue and then replace the bezel as you've shown. I think Marc at Long Island Watch might have made a video on it. Either way it's a far better method than removing the bezel unnecessarily.
Good idea Brain I may try it next time
Hi, I am curious about the cement - will it not bind the bezel with the insert permanently? What if I want to service/replace the bezel insert later on?
Nope you can still remove it if needed just drop the bezel bezel in hot watch should soften it enough to remove it
Can't you use Goo Gone to remove the adhesive residue and then degrease it with the alcohol?
Maybe but I don't the stuff Sir
At last…instructions on how correct the 2:23 lack of quality control (misalignment on a seiko!!!!!) Thanks!!!!:)
I have a new tool for removing the bezel now which makes things much easier
I can't understand why Seiko themselves can't QC the alignment consistently if it's this easy to get right first time
I think its because they are one of the biggest watch manufacturers in the world, Time is money so being many of there watches are under a 1k they don't have the time to check them correctly thats why bezels are misaligned and timekeeping cant be all over the place
Citizen makes much cheaper watches than Seiko but has no misalignment issues. For example my NY0040 is perfectly aligned.
Thank you so much! 🤝
You're welcome!
Great video’ helped me have guidance for changing the bezel insert and gasket in my turtle. Thanks!
Excellent glad it helped Sir
Seiko is going to have Lucas electrics style jokes formalised.
“What do you call a Seiko that lines up correctly”? “A fake”. Or “How can you tell your Seiko is authentic”? “When it’s movement is all over the place and there is dust on the dial”.
@@OscarOSullivan Unfortunately it is hit and miss when it comes to these Seiko's
@@ClickSpringReview Agreed which is a shame
Great Video. What tape do you use? Seems to be thicker than the normal transparent tapes for packaging.
It is MF here is a link to some good stuff www.cousinsuk.com/product/tape-protection-cousins?code=T31392
This looks like it maybe the same stuff, amzn.eu/d/5Th4PY4
My srp777 is ok, but it's very helpful to know this good job ⌚
Cheers Matt
Is it possible to align the chapter ring?
It is possible Maria but you have to remove the movement to do so
А если просто положить безелем вниз налить пару миллиметров спирта и оставить там, может спирт удалит клей?
Maybe possible you just have to remember to remove the rubber gasket as the alcohol would damage it
@@ClickSpringReview Я думал вообще безель не снимать, налить в ёмкость спирта положить как бы неглубоко))
I wouldn't just in case the alcohol attacks the gasket which which holds the crystal in place it only takes a drop
@@ClickSpringReview 6 E это что )))?
@@ClickSpringReview если у вас есть старая прокладка вы не могли бы положить её в спирт и посмотреть я думаю вряд ли спирт повредит прокладку резиновую, мы бы открыли новый способ как переклеивать накладку не снимая безеля)))
Each to their own but i can't understand how such a tiny misalignment would worry anyone! Some OCD there for sure!
I know its only small Tony but if its your only watch you look at it every day and everyday it stares you face at they couldn't get it right , Bit like having a picture on the wall which isn't square and of to one side, just no I say lol
Nice work but of course Seiko should have aligned the thing in the first place. My Arnie is bang on, as was my Shogun but my Turtle is a gnat's chuff off. Not enough though for me to follow your example. Seiko really need to check their QC and regulate their mechanicals but seemingly, they're not too bothered.
It’s true Seiko really need to up there game , No other brand is known to be this bad you always get the one off but with Seiko it’s around 1 in 3
If you’re that upset, buy a Rolex and stop whining.
My Grand Seiko Diver is off.
Normally GS is better but not prefect
Или если вы как-то попробовать разогреть прямо не снимая безеля и клей тот станет немножко вязким и попробовать повернуть этот бензель )))
The glue I use has a very fine tip so its very easy to place , but yeah you don't want to go mad with the stuff 👍🏻
The watch looks better without the bezel.
I can see where your coming from there
seiko shoud be embarrassed by videos like this.
That was 2 years ago and a Seiko Alpinist I reviewed only a week ago this the same its pretty normal
Not at all that's part of marketing techniques.
a better way is to buy another brand. Use the collective wallet to let seiko know low quality is not acceptable.
I found Seiko fans will buy anything with there name on it
Стыдно такая компания тоже купил часы king turtle seiko, и тоже разметка не совпадает это конечно караул отправил их по гарантии нам переслали письмо у вас всё в порядке всё отлично Так и должно быть типа,
Вот думаю так же сделать только здесь керамика и так просто наверное надавливать её нельзя она может и треснуть (((
You need the prefect size bezel and nylon dies for pressing a ceramic bezel into place Sir
@@ClickSpringReview а зачем мне бесит я свой оставлю безель я хочу эту керамическую наклейку отклеить и немножко повернуть
How did this end I fell asleep
LOL, you make things difficult for yourself. Simply poor boiling water over the bezel. This softens the adhesive. Then with some pressure push the insert. I have done it several times, and it works a treat. PS your sound went at 7.00
Cheers for the tip I’ll do that next time so sure 👍🏻 alway good to get constructive criticism
What about lume pip, does boiling water damage it and lum on it?? Or even rubber gasket on the bezel.
@@Visitor555 I have never had an issue. Gary from ILW does it cold
He's stronger than me
Did you do remove the bezel first before pouring boiling water then pushing the insert? Or did you pour boiling water on the bezel while it is in the watch then pushed it?
It was aligned in the first place...i do not see the difference, anyway nice video.
It was over to the1 o'clock side you can see at the start of the video, the owner asked me to fix it for him as it was driving him mad, PS I have another Laco review coming out again next week
Where was the miss alignment? You must have super humen vision if you can spot that.
Honestly this constant chase ufter unrealistic perfection is really making me sad for our generation.
Come on its not unrealistic just look at every other watch brand they seem to get it right, Its so bad with Seiko that we all joke about it now, if its not miss aligned its not a real Seiko
@@ClickSpringReview you guys have something to say on every brand and usually you are just repeating what other reviews are saying regardless if you actually had the same problem or not. With seiko it's miss alignment , timex is too loud , omega 's decompression nob , casio's resin cases vs metal, tudor poor man rolex, invicta don't even let me started, g shock too big, rolex overpriced, San martin unoriginal. Give me a brand name and I'll tell you what kind of complaints you gonna hear about in a review before even watching it.
You obviously don't know my channel very well, I'm nothing like what you say, ask any and I do mean any of my subscribers this, Yes I have spoken about misalignment issues with Seiko that because some of the ones I own and reviewed have been, or would you prefer if lied to you about this ? Unlike 99% of watch reviewers I'm a working clock & watchmaker and reviewed everything for £35K Rolex to the new Citizen Forza because I love watches, price doesn't come into it
@@ClickSpringReview I was speaking about watch chanels in general not you specifically.
Pro tip, buy a citizen.
which Citizen has the same design as this ?
@@ClickSpringReview the promasters have applied markers and are more well done overall as well as iso sertified divers, also half the price and impossible finding one with a missalined bezzle.
The movements preform better too.
@@Anirossa I just reviewed The Tsuyosa a few weeks back. I do believe Seiko QC is getting better over the last few years though
Если честно больше ни на одних часах я такого не видел я даже не мог подумать что такое может быть в часах это же не грабли не не совок это часы как такое можно делать позорище блин, у меня был Самурай сделанный в Японии там всё чётко было вообще а это вот шейка королевская черепаха сделана в Китае и тут просто трэ
This is normally from Seiko there QC isn't the best.
This is a great way to destroy your watch.
Really why do you say that ? as the watch is still running and when it comes to watches and movements I know a thing or to lets say
Most Seiko watches divers are crap had lots of seikos all been crap and over priced junk
I do think there are many good ones, I was wearing a MM200 great blue hole today and still enjoy it