This is incredible. I'd love to have shelving like this in my own place, and I've always loved the idea of secret rooms/entries. This looks very well done and fun to make.
THAT THERE IS NEAT BUT WHEN YOU ARE IN THE HIDDEN ROOM DO YOUR LITTLE BOTTOM FLAPS STAY UP , SO IF YOUR HIDING FROM A BAD GUY I'M THINKING HIDE AND SEEK IS OVER!!!!!!!!!!!
Perfect just what I needed to see what a good idea with the flip up as the outs wing one I've got to make has a unlevel floor so perfect thanks so much
Hey, I’m in the process of doing something similar, what is the depth of that bookcase, and what was the spacing needed to allow for the swing? Looks fantastic btw! Completely hidden!
Lol at the negative comments about the kicks staying up. Maybe I missed it, but I didn't hear "panic room" being mentioned. Perhaps it's just a "secret room" as the title says, for valuables, guns, whatever... The home owner goes in, does his business, comes out and closes everything up. Jeez. Great design and well executed. Hopefully the wheels don't end up leaving marks 😁
Great job on the build and video. Thanks for sharing it. I have some questions about the hinge system and latches. I saw your link for the Murphy door hinges, but wonder if there is some sort of formula/"trick" for determining the best placement for the hinge pivot point with this type setup? I know that the depth of the shelves. span of the opening, type of hinge, and direction of door swing all have important roles in determining the exact placement of the pivot point but I don't know just how to go about figuring that out. Can you provide some insight for that, please? I'm in the beginning stages of attempting to build a book case with three sections (really, a whole lot like yours, only without the second hinged door) that will take up an entire wall of my small office. The center section will be a door that MUST swing outward (as yours does) and will provide entry into closet/supplies space. Also, what type/manufacture model did you use for those "kick-spring" latches at the bottom of the doors? A link for those would be great help too. Thanks again for the video of the fantastic project.
Nice job what did you use for hinges I'm bluid a 30 x96 panty door with 6 in shelves on the inside but not sure what to do for the hinges any suggestions thanks
What is the gap between the 2 bookshelves as im thinking if we roll out the first bookshelf it will catch the other side if its too close. Really like your design and the wheels incorporated too
Very good now reinforce the hinges add more wheels for the support of the weight of the sandbags that you're going to add along with security monitors mini cameras on the outside three 12-volt batteries power inverter three cases of water 2 empty 5gal buckets with lids one five gallon bucket filled with kitty litter and lastly a 12-volt DVD player with headphones
Building one at my new house construction, got questions 1. How to ensure you can't get locked inside? 2. Any ideas for a way that you can make the doors swing inward to open up the entire space more
I think when he was opening the door I saw a wire behind the shelf that connects the book to whatever it slides into on top. So I think you could just pull the wire down. But, I'd love to see more details behind how that all works.
would it be possible instead of those 2 swing out cabinets/doors in the middle to open, could both swing out the same direction as 1 big wall portion? I want an entertainment center wall with tv and speakers to swing open/out and reveal a wardrobe behind it.
It is basically a gates spring latch - a wire is connected to it and it pulls the leaver to release it. I worked hard to find the right one that pulls in a smooth action
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 13](http://i.ytimg.com/vi/NlY2uzrALY8/mqdefault.jpg)
that is freaking awesome! I am going to have one of these in my place some day
Pretty darn awesome. One of the best I’ve seen yet as far as undetectable/ hidden.
This is incredible. I'd love to have shelving like this in my own place, and I've always loved the idea of secret rooms/entries. This looks very well done and fun to make.
Nice job, but eventually those wheels are gonna mark up the floors.
true tho
Sooner or later someone is gonna bump those kick panels and the jig would be up.
Not really, i noticed those are silicone wheels, they are very soft on thr floor
THAT THERE IS NEAT BUT WHEN YOU ARE IN THE HIDDEN ROOM DO YOUR LITTLE BOTTOM FLAPS STAY UP , SO IF YOUR HIDING FROM A BAD GUY I'M THINKING HIDE AND SEEK IS OVER!!!!!!!!!!!
Perfect just what I needed to see what a good idea with the flip up as the outs wing one I've got to make has a unlevel floor so perfect thanks so much
Soundproof it & it’ll be a great band jam room! ❤️🎹🥁🎸🎤 🎶
Looks really nice-great work!
Have done similar ones before.
Nicely done!
Well constructed, but not sure, I would like to be the one, drawing the short straw, to be left on the outside, to replace the " toe kicks" back down.
great design and finish. Would love to of seen a bit more of a in depth look of how you did the hinge
The hinge is basically what they call a Murphy Door Pivot Pin - check out this website for the kit murphydoor.com/products/single-flush-mount-hardware
@@mustangwoodworkinginc696 thanks for the link and reply =D
Exactly what America needs!
Wow Great job !!!
The Hiram Key... very clever! ;)
It's giving me Dexter's laboratory vibes. Love it!
VERY amazing job! ++
Beautiful!
That's bad ass I'm trying to figure out how to build one in the bed room that gives some good ideas right on
GREAT IDEA!
How much gap did you allow for door swing, and what formula did you use to determine the amount needed?
What is it made of and what is that beautiful finish/colour on it? Why do you need to lift the kick board up?
Hey, I’m in the process of doing something similar, what is the depth of that bookcase, and what was the spacing needed to allow for the swing? Looks fantastic btw! Completely hidden!
Lol at the negative comments about the kicks staying up. Maybe I missed it, but I didn't hear "panic room" being mentioned. Perhaps it's just a "secret room" as the title says, for valuables, guns, whatever... The home owner goes in, does his business, comes out and closes everything up. Jeez.
Great design and well executed. Hopefully the wheels don't end up leaving marks 😁
Good work 💪👷
looks great
Great job on the build and video. Thanks for sharing it. I have some questions about the hinge system and latches. I saw your link for the Murphy door hinges, but wonder if there is some sort of formula/"trick" for determining the best placement for the hinge pivot point with this type setup? I know that the depth of the shelves. span of the opening, type of hinge, and direction of door swing all have important roles in determining the exact placement of the pivot point but I don't know just how to go about figuring that out. Can you provide some insight for that, please? I'm in the beginning stages of attempting to build a book case with three sections (really, a whole lot like yours, only without the second hinged door) that will take up an entire wall of my small office. The center section will be a door that MUST swing outward (as yours does) and will provide entry into closet/supplies space.
Also, what type/manufacture model did you use for those "kick-spring" latches at the bottom of the doors? A link for those would be great help too.
Thanks again for the video of the fantastic project.
Super bad.....💯🔥
I what to do this … very well done..
Nice job what did you use for hinges I'm bluid a 30 x96 panty door with 6 in shelves on the inside but not sure what to do for the hinges any suggestions thanks
What is the gap between the 2 bookshelves as im thinking if we roll out the first bookshelf it will catch the other side if its too close. Really like your design and the wheels incorporated too
Very good now reinforce the hinges add more wheels for the support of the weight of the sandbags that you're going to add along with security monitors mini cameras on the outside three 12-volt batteries power inverter three cases of water 2 empty 5gal buckets with lids one five gallon bucket filled with kitty litter and lastly a 12-volt DVD player with headphones
would be a great panic or hide-a-way room if it weren't for the fold up molding at the bottom
I wish you would’ve shown the hinges
What do I think? I think this is amazing!
Good job but you could be more detailed; I would like to know how you made the book as a key to the whole bookcase!!
Building one at my new house construction, got questions
1. How to ensure you can't get locked inside?
2. Any ideas for a way that you can make the doors swing inward to open up the entire space more
I think when he was opening the door I saw a wire behind the shelf that connects the book to whatever it slides into on top. So I think you could just pull the wire down. But, I'd love to see more details behind how that all works.
would it be possible instead of those 2 swing out cabinets/doors in the middle to open, could both swing out the same direction as 1 big wall portion? I want an entertainment center wall with tv and speakers to swing open/out and reveal a wardrobe behind it.
Where can I get one of those I really like it
What kind of hinge did you use?
What type of wheels & hinges did you use to complete this?
Can you show where you've placed hinges?
I wonder if you could install a pocket door inside of the moving book shelf and have it make a room lol.
What hardware (hinges) did you use ? Invisidoor?
What type of hinges did you use for the toekick
Gud work
How much is the gap between the 2 doors and another carcass?
PUT THE CANDLE BACK!
Would like to see the mechanism when you pull back the book,what type of mechanism in the back?
It is basically a gates spring latch - a wire is connected to it and it pulls the leaver to release it. I worked hard to find the right one that pulls in a smooth action
@@mustangwoodworkinginc696 did you already Buy the book with the sistem????
Hey Nice job. What did you use for hinges?
How much does this project cost? Material and labor for the exact same bookcases that you've shown?
Budget: $6,000 - $8,000 CDN material included
Do you have construction plans for this?
y quien baja la tapa si me quiero esconder?
Great job, what hardware do you recommend & are the wheels set at an angle for the arc opening swing?
Could this become a in-law suite?
Good but inevitable someone grabs that book...I would just put a latched under the good idea kick plate perhaps even lock
There's books on my shelf that haven't been touched in years. Should be fine
So what about the bottom part that's lifted up the kicker?
Someone will look at that and know something suspicious?
That roller is gonna cause a groove in the floor over time. Having o redo the floor. :(
I like you ♥
Too bad you couldn't hide in it..the bottom flaps will give you away.
But i do love the design.
After watching the poop add, my brain is exploding.
I subscribe you channel
How to hide from the FBI.
No close captions that sucks
A demo with shelves loaded with books would be more helpful. (I'm guessing hardware needs to be WAY BEEFED UP. Flip-up thing seams clumsy
Cle
They should close win u close it
Hmm the wheels will leave Marks on the floor and you can see when someone is in the room
Now is not secret 😅😢😢😢
Too much talking
Terrible design