Yes , very easy to spend double the labour on the small details as the time spent to build the bare body ? Beautiful work , did you end up selling it ?
Hi Thank you for a fantastic video, We have just purchased a truck and I have been having sleepless nights about the articulation! after watching this video I now understand the concept and what we are going to have to do to "Bertie" before we have the box fitted. I love the Orange in the Kitchen and the outside. Amazing.
Hej, Mooie auto!! Bij Wim in HvH hebben wij ca. 25 jaar geleden een Unimog laten opbouwen. We waren zeer tevreden met het resultaat. Nu overwegen we om zoiets als die van jullie te laten bouwen. Bij Camperbouw HvH worden ze steeds beter!
@@virginiacojocaru Dank voor de uitnodiging! Doordat we permanent in Zweden wonen is het niet zo makkelijk om "even" naar Nederland te rijden. Het wordt op z'n vroegst vermoedelijk voorjaar 2022. Als jullie in Scandinavië zijn ben je uiteraard van harte welkom bij ons. Er is bij ons thuis ruimte en faciliteiten genoeg. Het lijkt me leuk om eens over auto's en reizen te kunnen praten met mensen, die ook ervaring hebben! Wij reizen momenteel met een nieuwe Hymer op 2 WD Sprinter onderstel. Alles is aangepast om lang te kunnen reizen, maar de auto heeft uiteraard ook z'n beperkingen. We staan er versteld van wat je toch kunt doen met deze Sprinter, al is het geen Unimog.
Thanks for sharing this video! what material are the casco panels made of? It looks like the floor is in wood covered with a layer of something white, but walls and roof? thank you so much!
from front to back, how long is the camper box not including the bumper and tires hanging off the back?width of camper? also, what is the total, bumper to bumper length of the vehicle? pretty amazing. :)
Not be pandantic but your wire looming is not good enough for an off road vehicle. Must be properly attached and stress relieved. Otherwise moving may result in arcing and possible fire.
Superb! Never ceases to amaze me how much the chassis on these things flex.
It's really neat to see all the wiring and plumbing and how you routed all the various lines in the vehicle.
Jeremiah Alfrey Thanx.
Yes , very easy to spend double the labour on the small details as the time spent to build the bare body ?
Beautiful work , did you end up selling it ?
Hi Thank you for a fantastic video, We have just purchased a truck and I have been having sleepless nights about the articulation! after watching this video I now understand the concept and what we are going to have to do to "Bertie" before we have the box fitted. I love the Orange in the Kitchen and the outside. Amazing.
Great to hear!
Perfection. Precision.
Shelves around the bunk is a great use of space... although that adds weight aloft.
a lot of open space, and not a lot of storage in this rig
Hej,
Mooie auto!! Bij Wim in HvH hebben wij ca. 25 jaar geleden een Unimog laten opbouwen. We waren zeer tevreden met het resultaat. Nu overwegen we om zoiets als die van jullie te laten bouwen. Bij Camperbouw HvH worden ze steeds beter!
Hi Dirk,
Leuk en dank).
Je bent welkom om langs te komen om camper te bekijken.
@@virginiacojocaru Dank voor de uitnodiging! Doordat we permanent in Zweden wonen is het niet zo makkelijk om "even" naar Nederland te rijden. Het wordt op z'n vroegst vermoedelijk voorjaar 2022. Als jullie in Scandinavië zijn ben je uiteraard van harte welkom bij ons. Er is bij ons thuis ruimte en faciliteiten genoeg. Het lijkt me leuk om eens over auto's en reizen te kunnen praten met mensen, die ook ervaring hebben!
Wij reizen momenteel met een nieuwe Hymer op 2 WD Sprinter onderstel. Alles is aangepast om lang te kunnen reizen, maar de auto heeft uiteraard ook z'n beperkingen. We staan er versteld van wat je toch kunt doen met deze Sprinter, al is het geen Unimog.
loving all your videos thank you for sharing them
AWESOME RIG!!!!
Thanks for sharing this video! what material are the casco panels made of? It looks like the floor is in wood covered with a layer of something white, but walls and roof? thank you so much!
Buen video
Thank you.
OMG THIS IS WHAT I HAVE BEEN WANTING TO MAKE SO BAD!!!
exelent videos a millon thanks for sharing with us, amazing rig , please let us know how much does it cost ? so we can start saving money lol
Thnax:)
that old saying comes to mind if you have to ask the price, you cannot afford it. So how much was it, cause I know I can never afford it.
Want one
from front to back, how long is the camper box not including the bumper and tires hanging off the back?width of camper? also, what is the total, bumper to bumper length of the vehicle? pretty amazing. :)
Hi, Wide 250 cm length 570 cm, bumper to bumper 720 cm.
Not be pandantic but your wire looming is not good enough for an off road vehicle. Must be properly attached and stress relieved. Otherwise moving may result in arcing and possible fire.
Cuanto vale este motor home?
Nice Video! How is attached the subframe on the trucks frame? i saw a long pivoting bar at the rear, if not wrong, and at the front?
Hi. We call the subframe it a kind of swing.
@@virginiacojocaru 3 points? 2 points at the fronts with rubber fixes and pivoting at the rear?
@@stefanocefis9071 Yep
Very very nice. Don't try anything like that in the US. Cost a fortune for sub-quality overland equipment.
What wheels and tyres are those? How do you get the single rear wheels to match fronts? Most have dual rears
20 Inch 395x85x20 Michelin you can order TGM chassis with singles (einzelbereifung).
Скажите почему выбрали такую конструкцию подрамника?Он ведь получился очень жесткий на кручение или этого и добивались?
Домик действительно жестко прикреплен к подрамнику, но по отношению к основному шасси, домик «гибкий». Это видно на кемпере в движении, в конце видео.
Good video, what is the name of the material used for the walls?
The walls are so called “sandwich panel”. The outer layer is glass-fiber reinforced polyester
and between them is special foam.
onde é fabricado estes caminhão em que país
How do you identify a legacy, old tech camper? Lead acid batteries and gas/propane cooking.
In our camper we have AGM batteries.
What the name of the company that made it ? Very nice .
Camperbouw Holland
Amazing work...but how much does it costs to this specific truck to buld??
+/- 300,000 Euros.
Hi, do you have any details for the company that built the vehicle please? Thanks
camperbouw hoek van holland
Hello, which panels do you recomend to buld the envelope of the motorhome ?
GFK polyester
do you have the fotos of the hydraulic mechanism between chassis and living capsule?
Unfortunately no.
whats the mileage ???
Where did you buy the aluminium corners for the kitchen cupboards
Leo vdm Hi. It is an universal aluminium corner.
what is the material used for the casco? or the company that builds it? thanks
Hi. It's glassfibre reinforced plastic (GRP) with foam in between. Camper bouw Holland.
Is the camper box attached to the truck frame with a 3/4 point or hard attached?
Jeremiah Alfrey 3 point
:) correct method to prevent twisting and damage to the camper box
how much to make one?
you can look for example at www.mobile.de for sell prices of such kind of autos.
What type of air intake/filter is that?
Jeremiah Alfrey It's Davidson
I couldn't find anything on google named that. I did find a X-Airbox here that looks the same. www.excap.de/upgrades/airbox
Jeremiah Alfrey Sorry, it is donaldson.
is this it? www.donaldson.com/en-us/engine/filters/products/air-intake/cleaners/psd/
Most probably.
You do realise that REALY LOUD MUSIC does not make it a better product don't you,
Yes, realy loud music does not make a better product.
No offense meant, but ...You can build your own expedition vehicle just by copying ... THIS video. Really! No kidding.
Ideas worth sharing. Success.