You should've press the horn button first, to be sure it's working before screwing on the horn button to your steering wheel. I watched so many videos on TH-cam, with idiots attaching their own wire to make their horn work. If the wires are connected properly, you shouldn't have to cut anything. It should be a simple installation with the wires that came with your Aftermarket steering wheel to your horn button, and a sensor on the back that touches the hub to make the horn go off when you press it.
Gravecb7 Accord yeah you are right, I got the correct boss from my local auto store. My horn does work because I recently registered my car so it needed to work otherwise it would not pass. I look back on this video and there are a few things I remember I forgot to put in but the basic concept is still there. Hope this video helped you and if you have any other how to’s you would like to see I’m more than happy to show you if possible!
Nice. I must've done most things on cars over the years, but never had to touch the steering wheel. Now i have to and this anawers a few questions thnx.
Can anyone say how far out the steering wheel ends up? Does it end up closer to or further away from the driver, the adapter looks thick! I've been holding out on this mod cause of that. Thanks.
Not usually. There is a metal surface on the boss and the hub that provides a connection but it may be different for other cars. I’m pretty sure its a universal thing though.
It's funny how I search for my unicorn of a car for a tutorial and can't find the specific one. Although I look for the task (hub and steering wheel install) and found a tutorial of my car. 😅
Not if the car doesn’t have any! If your car has airbags please disconnect the battery and leave it for 24 hours for the car to discharge before replacing the wheel
re gib hi, if you are talking about the boss then yes. It’s is what mounts the wheel to the steering column. The steering column only allows for a factory wheel to be mounted so the correct boss for the car (findable from most local automotive stores or online). I hope I answered your question :)
James Motorsport... not quite, what i meant is that there’s a circular piece of metal that has two protruding ends on both sides but I’m not too sure if it’s needed
You should've press the horn button first, to be sure it's working before screwing on the horn button to your steering wheel. I watched so many videos on TH-cam, with idiots attaching their own wire to make their horn work. If the wires are connected properly, you shouldn't have to cut anything. It should be a simple installation with the wires that came with your Aftermarket steering wheel to your horn button, and a sensor on the back that touches the hub to make the horn go off when you press it.
Gravecb7 Accord yeah you are right, I got the correct boss from my local auto store. My horn does work because I recently registered my car so it needed to work otherwise it would not pass. I look back on this video and there are a few things I remember I forgot to put in but the basic concept is still there. Hope this video helped you and if you have any other how to’s you would like to see I’m more than happy to show you if possible!
LoL
A sensor on the back 😂 WTF 😂😂😂
@@TurnMaster You got Positive and Negative idiot. Looks like you don't know anything about cars.
Lmao when the airbag cover hit em in the face 😂
ThatWhiteGuy hahaha
Thank you man 👌 , can't wait to install my sparco wheel and boss kit ...😁
Good luck!
Nice. I must've done most things on cars over the years, but never had to touch the steering wheel. Now i have to and this anawers a few questions thnx.
Got my boss kit on the way now I know how to do it keep up the great vids ur channel will explode trust me❤️
Acura Gang thank you man I really appreciate it:)
Where did you get the boss kit and steering wheel and how much for both
I missed the good old days, my grandpa owned the same car in the Philippines
Can anyone say how far out the steering wheel ends up? Does it end up closer to or further away from the driver, the adapter looks thick! I've been holding out on this mod cause of that.
Thanks.
Depends on how deep you're gonna go with the steering wheel, if you get a flat steering wheel it should be close to stock distance
Do you not have to deactivate the air bag?
Looks like ther was no airbag
Where did u get the wheel and the boss kit ?
0:51 😅
lfc yeah it kinda hurt haha😂
@@jamesmotorsport9062 😅 nice steering wheel btw
It hit her face
Is there any wiring to do to connect the hub from the car? So you can use the horn
Not usually. There is a metal surface on the boss and the hub that provides a connection but it may be different for other cars. I’m pretty sure its a universal thing though.
Good vid nice and clear and simple
Does the horn gonna work?
dFuze backstabber Baloch yeah
Great job bro
good video bro !
Did you have to force the hub on?
No, it should be a tight fit but it shouldn’t have too much resistance cause it might the the wrong part size and you’ll wreck your steering column.
It's funny how I search for my unicorn of a car for a tutorial and can't find the specific one. Although I look for the task (hub and steering wheel install) and found a tutorial of my car. 😅
What steering wheel is that ?
Br0ke b0y Pr0ducti0ns its a Saas deep dish but I can’t remember the measurements.
How is it sense u put it on
Br0ke b0y Pr0ducti0ns I’ve had no problems with it and its quite a good quality steering wheel
What did you do with the old wheel?
kept it and put it on my shelf
Legend
Hey mate, do you know what part number the boss kit is?
camlit13 not sure of the top of my head but you can look online and see what boss kit is right for your car!
Which car is it?🤔 Interior looks identical to evo 6
MJL it’s a 1997 Mitsubishi Mirage, the interior design was probably a base design for most cars in that year for Mitsubishi
@@jamesmotorsport9062hey man, i’m literally about to buy the same wheel setup for my 1997 lancer. i’m from australia crazy i found this video
Is it a quick release?
Raw potato 69 no, it’s fixed. If seen so many budget “snap off” quick release bosses that have failed. Since I’m on a budget I used a saas fixed boss.
what car you use?
Amin ZR 1998 Mitsubishi Mirage
Boss kit fortnite? But kit whsent in 2019
Is there any chance of that air bag oof and fuckin u up or am I just over reacting
Not if the car doesn’t have any! If your car has airbags please disconnect the battery and leave it for 24 hours for the car to discharge before replacing the wheel
James Motorsport k thanks mate
Crossiant Boy76 there also should be a bolt to release the airbag, do not pry it off with the screwdriver.
James Motorsport ok
Is the spacer required?
re gib hi, if you are talking about the boss then yes. It’s is what mounts the wheel to the steering column. The steering column only allows for a factory wheel to be mounted so the correct boss for the car (findable from most local automotive stores or online). I hope I answered your question :)
James Motorsport... not quite, what i meant is that there’s a circular piece of metal that has two protruding ends on both sides but I’m not too sure if it’s needed
re gib is it in my video? Can you put a time stamp?