Hi Guys here are the links, I also have a few on my Ebay store, thanks for watching. www.ebay.co.uk/itm/375868272300 links: Outgun store: www.outgun.shop/?ref=SUB12Airgunners Outgun discount code 10% off everything: SUB12 Outgun angled gauge bracket: www.outgun.shop/products/angled-pressure-gauge-bracket-for-airguns?ref=SUB12Airgunners Outgun gauge: www.outgun.shop/products/outgun-25mm-digital-pressure-gauge-400bar?ref=SUB12Airgunners Sekhmet store: www.sekhmetonline.com/?ref=SUB12 Sekhmet discount code 10% off everything: SUB12 Sekhmet angled gauge bracket: www.sekhmetonline.com/products/outgun-angled-pressure-gauge-bracket-for-fx-brk-skout-airforce-airguns?ref=SUB12&variant=46357458059507 My ebay store: www.ebay.co.uk/usr/sub12airgunners
Have had one of these fitted to my Ghost for a few weeks now. It’s nice to be able to check pressure without having to get up from my bench or having to lift and flip the rifle over.
That is a neat little kit I'm always turning my fx mk2 to look at how much air I have left before I need to fill now I can just look up and I'm good 👍🏼 thanks for sharing be safe buddy 💯
Great idea and well reviewed Jake. The issue I found with the FX one was it only allowed avery compact gauge. I've ordered one so ta for the code mate! Phil
Hi we didn't design this, it comes from a company called outgun it works great but it not our idea we cant take any credit for it's design / idea or fabrication, they sent it to us to test about 6 mounts ago, we have tested it properly now and done the video
i had this conversation with sekhmet and they said the smallest they could do was 25mm 🤔 a 23mm would be good for lots of guns but not possible apparently
Hello on a different subject could you tell me what the most common leak on a Daystate revere it’s only a few months old and been back to the factory but still leaks very slowly. Not the quality they once were for sure. It would be helpful if you could point me in the right direction please. I am a engineer so am capable thank you merry Xmas 🎅
Hi. Wy dont you sell to sweden? Im very intrested in your product. Please try to sell to sweden and hope to here from you. Wish you a Very Mary Christmas and a Happy New Year. /Rolf-Erik Hafgren Sweden
Hi Guys here are the links, I also have a few on my Ebay store, thanks for watching.
www.ebay.co.uk/itm/375868272300
links:
Outgun store:
www.outgun.shop/?ref=SUB12Airgunners
Outgun discount code 10% off everything:
SUB12
Outgun angled gauge bracket:
www.outgun.shop/products/angled-pressure-gauge-bracket-for-airguns?ref=SUB12Airgunners
Outgun gauge:
www.outgun.shop/products/outgun-25mm-digital-pressure-gauge-400bar?ref=SUB12Airgunners
Sekhmet store:
www.sekhmetonline.com/?ref=SUB12
Sekhmet discount code 10% off everything:
SUB12
Sekhmet angled gauge bracket:
www.sekhmetonline.com/products/outgun-angled-pressure-gauge-bracket-for-fx-brk-skout-airforce-airguns?ref=SUB12&variant=46357458059507
My ebay store:
www.ebay.co.uk/usr/sub12airgunners
Have had one of these fitted to my Ghost for a few weeks now. It’s nice to be able to check pressure without having to get up from my bench or having to lift and flip the rifle over.
yes they work well we are very happy with our one😀
That is a neat little kit I'm always turning my fx mk2 to look at how much air I have left before I need to fill now I can just look up and I'm good 👍🏼 thanks for sharing be safe buddy 💯
it's a nice little addition mate
Great idea and well reviewed Jake. The issue I found with the FX one was it only allowed avery compact gauge. I've ordered one so ta for the code mate! Phil
Fat fingers on a tiny keypad. Now edited. Sorry!
Thanks Phil 👍
Nice little vid, thanks Jeff, and for the links… very handy. 👍
the oled ones are very nice, we will be doing a review on them when we have had the them a while we need to test to make sure they work ok
@ Cheers Jeff, I’ll look forward to seeing that vid.
This is tempting to combine with a digital gauge....nice little overview.
Thanks Tim
Brilliant I put this idea to you a phew weeks ago now but for the fx dream line but nice to see you designed it for drs congratulations
Hi we didn't design this, it comes from a company called outgun it works great but it not our idea we cant take any credit for it's design / idea or fabrication, they sent it to us to test about 6 mounts ago, we have tested it properly now and done the video
But you definitely are capable of doing something similar I’ve seen your work sir it’s perfect engineering
A nice little upgrade for a suitable air rifle. Thanks for posting the video 👍
thanks for taking the time to comment 😁😁
Great video Jeff what washers or parts do I need to level my gauges on my krait L please thanks
Nice little accessory, good that it comes with spares, for such small parts that are easy to drop and lose 😕😕
yes i liked the fact it came with spares 😁 thanks for watching
Finally it’s nice to see some X Rings 😂Be interested to see if they do other threads such as 1/8 NPT. Great video chaps 😁
thanks mate 😁😁
this is awesome! i ordered one.
that’s a nice upgrade . i do like those digital gauges 👍
yes the Oled ones look very nice, we will be doing a review on them when we have used them for a while 👍👍
@@sub12airgunners awesome cant wait!
Nice video, very educational.
thank you for watching 😀😀
NICE UPGRADE. 😀😀
thank you
Would it fit the dreamline tact thanks
it may be close to the mag if fitting to the reg
Great video as usual, would this fit on an alpha wolf or would the stock be in the way?
Hi, I have just checked, the stock hits unfortunately. So it will not fit, It does fit on the Delta wolf but not the Alpha wolf :(
@ thanks so much for taking the time to check
Cuáles son para tí los rifles pcp más precisos para largas distancias?
🥳Good morning, does it work for the Vulcan 3?🥳
Why don’t they make the gauge smaller like there’s gotta be a way a way to make them smaller thinner less chunky
i had this conversation with sekhmet and they said the smallest they could do was 25mm 🤔 a 23mm would be good for lots of guns but not possible apparently
Hello on a different subject could you tell me what the most common leak on a Daystate revere it’s only a few months old and been back to the factory but still leaks very slowly. Not the quality they once were for sure. It would be helpful if you could point me in the right direction please. I am a engineer so am capable thank you merry Xmas 🎅
Nice!
thank you for watching
nice one
Thanks for the visit
Hi. Wy dont you sell to sweden? Im very intrested in your product. Please try to sell to sweden and hope to here from you. Wish you a Very Mary Christmas and a Happy New Year.
/Rolf-Erik Hafgren
Sweden
nice gimmick
yes a nice little gadget to bolt on 👍