From here it is taken to a proper shredder, Where the process starts all over again, The materials are reduced smaller and sorted into recycled materials, This stream is by far the worst example of the operation on UTUBE to date😅
One would think that there would be more companies using this slow speed high torque technique. The others that spin faster, get stuck, back out to clear, and re-feed, are simply wasting fuels, man-hours, and maintenance down time, which all add up to big money in a yard that goes 24/7. Do a search for this one. It does do cars blocks and trans
I'd be a bit disappointed with the way a lot of the bits that come out are still connected - not exactly ready for material sorting IMHO. Gave the bike a good punishing though...
Mas que comentario es una consulta. Si no procede hacerla en este medio ruego me disculpen. Pregunta: Aporta este sistema de cizallado de chatarra al ser aplicado a los paquetes de envases de acero de recuperación o recogida de los RSU, (o sin empaquetar), ventajas sobre la fragmentación por el molino de impactos, el más aplicado creo, pero hace pelotas con los trozos. Si puede ser adaptado a esta chatarra cual sería su coste para una producción de 10 ton/hora. Busco el que los trozos de bote no disminuyan su superficie específica al fragmentarlo. Gracias
*"Is it really necessary to have so much digital control hardware?"* I couldn't even imagine...The machine has one action, one direction, and one function.
The material processed is not where these machine was designed for, they are throwing in bales of already shredded metal and just pull them apart. The motorcycle is the type of metal that should be shredded in this, I expected whole cars getting in, and steel sections etc., sure this thing has enough torque to even crush engine blocks or HEB200 steel section.
Seems to be a complete inefficient waste of energy. Why crush the 55 gal drums if you are going to grind it into medium size pieces? Have a grinder where the cans are crushed. Maybe for transportation reasons. And will these pieced be ground into even smaller pieces? If so then have big grinder dump into smaller grinder etc.
For the 100ds of millions of tires available in every country, I haven't seen any machine do the job fast enough. I'm not seeing the pieces being shredded smaller than the entry one. Rotation is way too slow, and the teeth are way too large. The teeth should've been at a V angle with the square point, for the tires shredding R.P.M at 3 times, btw, should the tire be de-wired first?
As big and powerful some of these machines are, there still slow. It would take forever to shred and entire scrap or junk yard. Like others have said, is not really that much smaller after it's been shredded.
Most of what they put in there looks shredded already. I bet the owner quite disappointed with this smasher more then a shredder, and the cost. I have seen the older shredding machine,s do a more efficient job by far, and they hardly ever stop and back up to clear the jamb in there machine.
There are better and faster metal shredders on youtube. Lot of large unshredded pieces going through to pile. One viewer mentioned the unprotected hydraulic hoses hanging near the side waiting to be ripped off by a piece that misses the hopper. Needs a second shredder to regrind the spoils pile. Other shredders have a magnetic conveyor to sort out ferrous metal as it exits the machine. Back to the drawing board for this one.
Its not doing much in the way of shredding. More crushing than shredding judging by what comes out the bottom. The teeth on the shafts are too wide imo.
The cutter teeth looks like this was using for some years an the cut pieces are very large. Looks like a mistake with this machine. I see smaller machines do way better.
I like to watch shredding videos for the shredding NOT the OUTPUT. Your videos show75% output and 15% shredding. Would you please focus on the shredding aspect. Thank you very much.
que gracia tiene una cortadora de metales que le dan alimento ya pre cortado , Que le falta potencia a los motores hidraulicos......chatarra cara va a ser
You screwed it up with that frickin music we like to hear the metal crushing if I want music I'll turn on the fricken radio give me a break therefore I will not subscribe to your channel
Looks like it comes out the same size as it goes in.
That front tire and rim was a trooper till the end
This machine is good running. We are factory make shredder machine. welcome to my channel watching.
the worlds first shredder that the scrap comes out bigger after being shredded
So heart warming watching Zato come to life and eating his first meal :-)
Our local yard use a cuber, takes a lot of tin to compress into 3000 pound blocks about 30 inches by 30 inches. Can transport it more profitability.
6:30 It's odd: The way each load sounds when it's dropped in makes it seem like it has the weight and consistency of dry leaves.
This impressive, Mighty Bite shredder does exactly as it is designed to do, including the size of materials rendered.
O really so what's the point of a shredder that dont shred???
I have worked on these pumps before on roller . It look much the same set up . How do get all the heat in the system
stuff coming out looks exactly the same as it went in.
hehe yes almost but i bet if you put in say a schoolbus it wouldbe cut in to at least a few pieces. hehe
Based on the width of the blades, that’s obviously what they wanted.
Yes, zi thought that too?
I half expected the motorbike to come out fully restored as its that shit.
It seems like what they are putting in is already processed to the size the machine is set for?
So have the hydraulic lines exposed?
I'm interested to know what happens to the waste after being shredded. There's all kind of material in the mix, how is it sorted?
From here it is taken to a proper shredder, Where the process starts all over again, The materials are reduced smaller and sorted into recycled materials, This stream is by far the worst example of the operation on UTUBE to date😅
Brain power. I love it. genius work
Does it only operate in slow motion?
Does this machine have sensors that stop? I hope not. I have some people to bring you soon and I want to see how he copes with them in the tub.
Is that a finished product or is this just a primary shred??
my sound is messed up here. so i can get the audio . i really like the engine in that ! super clean. is it a Cummins? diesel?
If I had spent money for this, I would expect the pieces to be the size of splinters. A 2x4 passed thru unscathed for crying out loud.
yes well right = it is shit house !
Always have to turn the sound since the audio is annoying.
One would think that there would be more companies using this slow speed high torque technique. The others that spin faster, get stuck, back out to clear, and re-feed, are simply wasting fuels, man-hours, and maintenance down time, which all add up to big money in a yard that goes 24/7. Do a search for this one. It does do cars blocks and trans
I'd be a bit disappointed with the way a lot of the bits that come out are still connected - not exactly ready for material sorting IMHO. Gave the bike a good punishing though...
So what’s the point?
Mas que comentario es una consulta. Si no procede hacerla en este medio ruego me disculpen.
Pregunta: Aporta este sistema de cizallado de chatarra al ser aplicado a los paquetes de envases de acero de recuperación o recogida de los RSU, (o sin empaquetar), ventajas sobre la fragmentación por el molino de impactos, el más aplicado creo, pero hace pelotas con los trozos. Si puede ser adaptado a esta chatarra cual sería su coste para una producción de 10 ton/hora. Busco el que los trozos de bote no disminuyan su superficie específica al fragmentarlo.
Gracias
Is it really necessary to have so much digital control hardware?
*"Is it really necessary to have so much digital control hardware?"*
I couldn't even imagine...The machine has one action, one direction, and one function.
seems pretty slow?
Frankly, seems more like a compactor than a shredder. The pieces coming out are not dramatically smaller than what went in. Why bother?
The material processed is not where these machine was designed for, they are throwing in bales of already shredded metal and just pull them apart.
The motorcycle is the type of metal that should be shredded in this, I expected whole cars getting in, and steel sections etc., sure this thing has enough torque to even crush engine blocks or HEB200 steel section.
That, my friends, is called TORQUE.....
the music killed it for me. we rather hear the natural sounds
But..... Will it pass the anchor test?
какую фракцию бросили в шредер ,такая и выпала)
Looks like its chomping mostly on garbage. With that power and size you'd expect dump trucks and locomotives.
The music should switch to SLAYER the moment stuff starts to get shredded
Seems to be a complete inefficient waste of energy. Why crush the 55 gal drums if you are going to grind it into medium size pieces? Have a grinder where the cans are crushed. Maybe for transportation reasons. And will these pieced be ground into even smaller pieces? If so then have big grinder dump into smaller grinder etc.
@3:00 now THAT'S a fuckin' Allan Key...
10:46 ... did somebody lose a limb?
i thinks its oil mixed with red paint
For the 100ds of millions of tires available in every country,
I haven't seen any machine do the job fast enough.
I'm not seeing the pieces being shredded smaller than the entry one.
Rotation is way too slow, and the teeth are way too large.
The teeth should've been at a V angle with the square point,
for the tires shredding R.P.M at 3 times, btw, should the tire be
de-wired first?
Price?
Probably help if it actually shredded stuff
the cutting edges on the first leftside roller are already badly chipped!
This is a poor quality shredded.
There's where I put my old level
Im certain Zato can do better than this. This thing reduces large chunks to big pieces.....
求背景音乐
8:40 poor motorcycle
As big and powerful some of these machines are, there still slow. It would take forever to shred and entire scrap or junk yard.
Like others have said, is not really that much smaller after it's been shredded.
more of a crusher than a shredder but fuck me dead that's got some power
8:25, that poor bike fucking SQUEALED. That made me really sad :(
engasal The one tire just hanging on til' the bitter end.
Most of what they put in there looks shredded already. I bet the owner quite disappointed with this smasher more then a shredder, and the cost. I have seen the older shredding machine,s do a more efficient job by far, and they hardly ever stop and back up to clear the jamb in there machine.
Little difference from the original input
oooo giant shredder
Run that stuff threw about 27 more times and it might be shredded.
There are better and faster metal shredders on youtube. Lot of large unshredded pieces going through to pile. One viewer mentioned the unprotected hydraulic hoses hanging near the side waiting to be ripped off by a piece that misses the hopper. Needs a second shredder to regrind the spoils pile. Other shredders have a magnetic conveyor to sort out ferrous metal as it exits the machine. Back to the drawing board for this one.
Its not doing much in the way of shredding. More crushing than shredding judging by what comes out the bottom. The teeth on the shafts are too wide imo.
you would think the hydraulic pipes would be better protected
do these "super technicians" know that there have been "compressed air guns" on the market for to tighten bolts and nuts?
The cutter teeth looks like this was using for some years an the cut pieces are very large. Looks like a mistake with this machine. I see smaller machines do way better.
I bet that thing is so damn loud
+Matt Inman how can you tell over the music?
not very impressive is it stuff going in coming out same size just a bit more wrinkled
no more disco music PLEASE
Video too long and machine runs too slow. You over spent.
I like to watch shredding videos for the shredding NOT the OUTPUT. Your videos show75% output and 15% shredding. Would you please focus on the shredding aspect. Thank you very much.
I am waiting for a big chunk of trash to fall on those hydraulic lines and tear them off.
+tugaman1000 Was thinking the exact same thing, should cover them up somehow.
I am sure they shrouded them after replacing them a time or two. Not impressed leaves stuff big and chunky
The zoom operator strikes again. Oh boy!
Not impressed with this shredder most materials came out the same size after being dropped into the hopper, Hope you have a guarantee??
Na so etwas Besonderes scheint er ja nicht zu sein.Das Material war vorher nicht größer als es unten wieder rauskommt
Blue Devil!! its a piece of tinny crap, why is it up on stills, hide it under the bed, it would do as a cheese grater.. maybe.
Great videos but what's with the stupid background music? It does not need it !!!!!
Beware, ZATO the metal muncher is in town
I still say publicly dumping pedophiles and rapists feet first into this would decrease the crime rate.
Garbage in garbage out but I'm curious as to why the Blue Devil is .....Ummm, Yellow! 🤔
Is it working? Shit falling is nearly size it went in. Worst shredding ive seen.
You did saw it hey: I was going to say what is the difference between pile one and pile shredded?
The scrap coming through this thing is far to large. Sub standard job.
It took only 10seconds to realize the shredding was a waste of time and effort:::
Слишком крупное нужно пропускать по второму разу
Poor shredding action. Some pieces hardly touched.
Agreed.
Unimpressive
Don't look like it's doing a very good of a job shreddin the crap!
i have seen a lot better than this one = 4/10 a bit weak !
Ps, nobody ever needs those bike parts
que gracia tiene una cortadora de metales que le dan alimento ya pre cortado , Que le falta potencia a los motores hidraulicos......chatarra cara va a ser
it's yellow
Too big and slow for trash shredding. Better suited for car crushing.
Not very impressed. It was only crushing stuff already crushed and not very well. I want to see a bus go through it 😴
Aren't ALL Shredders "TWIN SHAFTED"? What's the Big Deal? This one is also SLOW!
No. 1, 2, 3, & 4 Shafts are common. ♡ T.E.N.
tao chả hiểu nó là cái gì
This is slow
Turns waste into trash
утилизатор велосипедов, машинка так себе, кусок рельсы попадет и машинка съест сама себя.
Not a good Schroeder, much to slow, lousy finished product, Get. Rid of it.
Yeah, kinda boring. Big massive machine... tiny pieces of garbage going in.
Not really shredding is it, I’ve seen better….
Nice engine though…..!
I think the teeth are too big.
Worthless fucking toy!!! Does nothing!!! Look at the ejected debris... Same shit as the shit that went in!
You screwed it up with that frickin music we like to hear the metal crushing if I want music I'll turn on the fricken radio give me a break therefore I will not subscribe to your channel
Waste of money.
This shredder sucks