1996 1997 1998 Yz 250 Power Valve Linkage and Valve Operation

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ม.ค. 2025

ความคิดเห็น • 148

  • @JanWillemvanCappellen
    @JanWillemvanCappellen 2 หลายเดือนก่อน

    I was completely puzzled by the notch and thought I was missing something. I never figured its meant for helping with tightning the screw. Thanks a lot, helped out alot!

  • @JanWillemvanCappellen
    @JanWillemvanCappellen 5 หลายเดือนก่อน

    Restoring a 98 and noticed the piston has hit the powervalve. Checked the powervalve and it seemed to have snapped the leverage part. I am now thinking that might explain the spring not functioning properly to limit the range thus hitting this piston, nasty stuff. Thanks for explaining and showing in detail 🎉

  • @fortress69666
    @fortress69666 10 ปีที่แล้ว +1

    Man your the best for posting this vid, I doing a top end job for my friend and noticed the hole in the power vavle where you put your screw driver in to remove the powervavle assembly, I thought that he was missing the part and cut a screw driver to make a dowel and lock tighted my home made dowel Into the hole thinking that the piece with the groves piveted on it , I started the bike and it not running right at all , now I now what I got to do to make her run good again , great post 1996 yz250 will run great again tommorrow after some tinkering

    • @Keith1212
      @Keith1212  10 ปีที่แล้ว

      Glad to hear this video helped you!

  • @southbay281
    @southbay281 8 ปีที่แล้ว +2

    thanks for the reply brotha. I got the linkage welded to save time and money at a local muffler shop and now works like a charm.

  • @Exo5432
    @Exo5432 9 ปีที่แล้ว +5

    Thanks for the video, it helped me out greatly. There is no information besides your video online on how to set it up. Keep up the good work dude!

    • @Exo5432
      @Exo5432 9 ปีที่แล้ว +1

      +Joey Pongallo Also my 94 is pretty much the same setup. Besides the inner spacer you had to make. That isn't needed for the 94.

  • @amarkey09
    @amarkey09 10 ปีที่แล้ว +3

    dude thanks for putting this up I have a 95 yz250 that i got as a project and i have been scratching my head on the power valve looks like i gotta order some stuff and do some fabrication.

  • @sambuvca22
    @sambuvca22 9 ปีที่แล้ว +3

    Thank you. Restoring a 98 and my power valve leaked. I took it apart replaces the orients and seals and was unsure I had It right. I also learned how to tighten it correctly with that dowel pin hole.

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว +1

      +Sam Avola Awesome man glad it helped. Thanks for watching!

  • @pyro_p5999
    @pyro_p5999 5 ปีที่แล้ว +1

    Thanks for this video I just finished rebuilding my 94yz250 from bottom up... I had the bike apart for 4 years was looking for a video on how to connect the linkage and this popped up thanks again

    • @Keith1212
      @Keith1212  4 ปีที่แล้ว +1

      Thanks for watching!

    • @foxeye1299
      @foxeye1299 4 ปีที่แล้ว

      so is the '94 the same valve and linkage as the '97

    • @foxeye1299
      @foxeye1299 4 ปีที่แล้ว

      i just noticed im missing some bits

    • @pyro_p5999
      @pyro_p5999 4 ปีที่แล้ว

      @@foxeye1299 no because they are different jug set up for the power valve

    • @pyro_p5999
      @pyro_p5999 4 ปีที่แล้ว

      @@foxeye1299 the jug may fit the bottom end or whatever but.... You need the innards for that jug

  • @daryldickhout7740
    @daryldickhout7740 6 ปีที่แล้ว +1

    Awesome video thanks a lot my power band wasn’t kicking in on my yz125 and that was lose so I put it tight and now she rips

  • @hardhouse333
    @hardhouse333 10 ปีที่แล้ว +2

    Same Engine as mine. I did this today, and thanks to this video, the piston might not be smelted cheese ;)

    • @Keith1212
      @Keith1212  10 ปีที่แล้ว

      that's awesome man! thanks for watching!

    • @commando123ism
      @commando123ism 10 ปีที่แล้ว

      Where did you order that piece that slides on the end of the power valve I can't find one anywhere

  • @travisk1487
    @travisk1487 4 ปีที่แล้ว

    thank you for the clear video. turns out my power valve someone left the tightening pin in for whatever reason and it broke off one of the ears on the fork. also my valve is actually broken in half and theres some shiny parts on the valve. piston is fine though and rings are intact so im a lucky man. i ordered new $200 valve and o rings and hopefully itll have power again. ive been fighting with this bike trying to figure out why it has no power. and this is probably why!

    • @Keith1212
      @Keith1212  4 ปีที่แล้ว

      Thanks for watching! The power valve it self is two parts that have a long allen head bolt that holds them together. Not sure if that's what your referring to when you say it's broke. Good luck on the fix!

    • @travisk1487
      @travisk1487 4 ปีที่แล้ว

      @@Keith1212 yea but also the pins that hold it in place aswell are all wallowed out to the point where one side has sharp metal and i just dont wanna risk it. I think the locating pins are neccesary

  • @nicnadu0515
    @nicnadu0515 ปีที่แล้ว

    Nice it’s the same on my 1989 yz250 I was lucky enough to have all the little pieces

  • @matthewwilliamson6266
    @matthewwilliamson6266 3 หลายเดือนก่อน

    Great video man solved my problem

  • @702bikelife2
    @702bikelife2 8 ปีที่แล้ว +2

    thanks bro i got a 96 yz250 and im 13 so i did not know but you helped alot

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว

      Glad it helped! Throw up a vid of it on your channel sometime! Thanks for watching!

    • @702bikelife2
      @702bikelife2 8 ปีที่แล้ว

      I need the thing that you had to buy on mine

  • @josephusaurah5670
    @josephusaurah5670 8 ปีที่แล้ว +1

    awesome video and bike bro. I got a 96 yz250 and im missing the same pieces.

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +1

      Thanks man. That's the reason I made this vid. Once I figured out what I needed and what I couldn't order I knew someone else would be in the same boat someday. Thanks for watching!

  • @Zaanjo
    @Zaanjo 9 ปีที่แล้ว +2

    my 93 yz125 power valve is the same and i realized the previous owner left the installation pin (the notch that holds the power valve from spinning) in there so does that mean ive been riding without hitting the actual powerband this whole time??

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว +1

      +Zaanjo well there's only one way to find out! haha

    • @Zaanjo
      @Zaanjo 9 ปีที่แล้ว +1

      Keith1212 yea, if only i didnt find out while my engine is off my bike and split apart for tranny problems lmao

  • @Gapparov326
    @Gapparov326 ปีที่แล้ว

    thanks for your job. that video helped me a lot.

  • @tracksidesolution
    @tracksidesolution 3 ปีที่แล้ว

    When doing a leak down test I have air leaking out the left side cover of the power valve where there is a little cut out. How do I prevent this?

  • @_.vch._1387
    @_.vch._1387 6 ปีที่แล้ว +1

    Hi keith!
    I have question to you!
    Im rebuilding a 97' wr 250, and i disamble de ypvs and where you put allen i have a pin that doesnt let move easily the powe valve ...so if a take the pin out will affect in something ,its necesary that pin or i can pull it out and let the power valve whit it??? I will aprecciate an answer!
    Greetings from Chile!

  • @nathanwatson2174
    @nathanwatson2174 4 ปีที่แล้ว +1

    I'm pretty sure that the part(s) you say you cannot order as they are greyed out are available. Look on the cylinder / cyl head schematic rather than governor. The later bikes (96+) seem to be missing a cylinder head schematic so you might have to bring up a '95 or earlier to find this. The PV is largely the same from 89-98 with the exception of a few washers/rings.
    Yamaha part no 3JE1193701 for your home made spacer.
    Hope this helps, and please correct me if I am wrong

  • @awesomefish100
    @awesomefish100 8 ปีที่แล้ว +2

    So if my power valve is leaking thick oil out of it, what part do you think it is? I heard something about the power valve shaft developing wear and not having a proper o-ring seal or something? Is that part hard to come by?

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +1

      +LCH_Entertainment It will leak a bit of oil on the side with out the linkage. It even has a bolt in the cover to drain the excess. The other side that has the linkage won't leak as much but a tiny bit under normal riding. The oil keeps the power valve lubed and working properly. Now if you have a ton of very thick oil or sludge in there it needs to be cleaned out as it will slow the power valves movement. If you haven't replaced the O rings on either side then I would do that while giving it a good clean to get rid of any thick oil or sludge. Then lube it back up with pre mix and put it back together. Thanks for watching!

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +1

      +Keith1212 Also you can order the O rings from places like partzilla, bike bandit, and rocky mountain atv websites. Just use there bike finder menu to put in your year make and model. Normally partzilla is the cheapest for OEM parts.

    • @awesomefish100
      @awesomefish100 8 ปีที่แล้ว +2

      Thanks so much for the helpful response!

    • @flyingfencepost
      @flyingfencepost 8 ปีที่แล้ว +1

      +LCH_Entertainment On the side with the cover that says "Yamaha" on it, there is a cover inside that cover with a gasket beneath, so a gasket for the outside cover and one for the inside cover. That side has direct access to the exhaust and Im guessing acts at abit of an expansion chamber, hence the drain bolt. The side with the linkage will have a very small o-ring inside the linkage, with a larger o ring, and then an oil seal at the very end. If its leaking bad then replace all of those.

  • @patbrooks4308
    @patbrooks4308 ปีที่แล้ว

    Can you replace the power valve seal while you have that off ??? Cause mine leaking Spoog out the bottom of my cover ?????

  • @cashoffroading3734
    @cashoffroading3734 ปีที่แล้ว

    Needed this lol thanks man

  • @timallen2861
    @timallen2861 5 ปีที่แล้ว +1

    Where can I find a spring for 1982 yz250

  • @commando123ism
    @commando123ism 10 ปีที่แล้ว +1

    Where did you get that part that slides on. The end of the power valve. I can't find it anywhere

    • @Keith1212
      @Keith1212  10 ปีที่แล้ว

      rocky mountain atv or bike bandit. I prefer rocky mountain atv though. Just look up your bike. Mine was Yamaha>1997>yz250. then click the box on the side that says governor. The part I think your referring to is part #1 on the schematic. Good luck hope this helps!

  • @ronaldjackson5486
    @ronaldjackson5486 7 ปีที่แล้ว +1

    Where did you get that first piece you was talking about? I can't find one anywhere

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว

      www.partzilla.com/parts/search/Yamaha/Motorcycle/1996/YZ250H1/GOVERNOR/parts.html You can't order the spacers that I made in the video, but everything else is here. Thanks for watching!

  • @camdentaylor68
    @camdentaylor68 ปีที่แล้ว

    Does anyone have the part number on that spring? The rest of the spacers I can make on my late but don’t have the spring

  • @lucao__2598
    @lucao__2598 3 ปีที่แล้ว

    Preciso dessa Valvuka para uma yz250 1996, você tem?

  • @norso6495
    @norso6495 3 ปีที่แล้ว

    Anyone have any info on where I could get the spring?

  • @gregorythomas5066
    @gregorythomas5066 9 ปีที่แล้ว +1

    Great Vid! I was able to order all of the parts you showed! Im in NJ and Mt. Holly KTM ordered them for me

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว

      Gregory Thomas Glad it helped you! Thanks for watching!!

  • @timkuch2307
    @timkuch2307 5 ปีที่แล้ว

    When the power valve is completely closed, the side ports aren’t completely closed off are they?

  • @matthewstonerock5051
    @matthewstonerock5051 7 ปีที่แล้ว +3

    Can someone please tell me where I can order the boss lever and spring ?

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว +1

      www.partzilla.com/parts/search/Yamaha/Motorcycle/1996/YZ250H1/GOVERNOR/parts.html ? Should be able to find everything here. Except the couple things that are grayed out. Thanks for watching!

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว

      Here's an ebay link with a couple used push rods if that's what you were needing. www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H1.Xyz250+3SP-11990.TRS0&_nkw=yz250+3SP-11990&_sacat=0

    • @matthewstonerock5051
      @matthewstonerock5051 7 ปีที่แล้ว +1

      Thank you so much you're a life saver I couldn't find the stuff anywhere

  • @sharenewidney3226
    @sharenewidney3226 10 ปีที่แล้ว +1

    I HAVE A 1997 YZ250 YAMAHA AND IM PUTTING NEW GASKETS ON TOPEND AND I GOT NEW OIL SEAL WERE DOES IT GO

    • @Keith1212
      @Keith1212  10 ปีที่แล้ว

      I'm not sure the seal your refering to. If you wanna Pm me on here with a link to a pic I can take a look for you.

  • @joeyakabert
    @joeyakabert 5 ปีที่แล้ว +1

    Thanks! I pulled mine apart today and all the pieces fell out i had no idea how it goes back

  • @250race
    @250race 5 ปีที่แล้ว +2

    Extremely good video on the power valve. I run Castor 927 for my premix. 36/1
    You can run at 40/1
    Do you see all the carbon build up on his exhaust and top of his piston. If you run the 927 none of this will be there and your power valve will not have all the carbon build up on it just a heads up

    • @patbrooks4308
      @patbrooks4308 ปีที่แล้ว

      With 40:1 and 165 main as pro circuit recommend still runs very rich I use Lucas mines 97 Yz250

    • @250race
      @250race ปีที่แล้ว

      @@patbrooks4308
      What carb do you have on the bike.
      And I want you to ohm your coil it needs to be 13.5 to 14 ohm
      Cap.need to be 5 to 6 or no good

  • @bgmoody3517
    @bgmoody3517 4 ปีที่แล้ว

    What's the bolt size n where could I go to replace one just like it?

  • @bikemancody2752
    @bikemancody2752 7 ปีที่แล้ว +2

    How much oil does the gearbox hold?

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว

      750 ml as it states on the cover near the oil fill. Also there is an oil check bolt that you can remove and fill the oil till it drips out of the hole, replace the bolt when it does and your good to go. The oil check bolt is located on the same side as the oil fill on the bottom left of the crank case. It will be the only one with a washer on it. Thanks for watching!

    • @bikemancody2752
      @bikemancody2752 7 ปีที่แล้ว +1

      Had brand new Boyesen covers after my rebuild. Now that I think of it the old covers never came back with my engine when,I had the rebuild done.

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว

      oh yea haha. That would have been some good $ if you got them back to go on ebay probably.

  • @942doc1
    @942doc1 6 ปีที่แล้ว

    Will a bike not start with powervalves disconnected?

  • @marcialquinones5683
    @marcialquinones5683 3 ปีที่แล้ว

    if is liking no good ? I have the same motor whit same problem I buy the bike 2 week ago parts is spencers?

  • @patbrooks4308
    @patbrooks4308 ปีที่แล้ว

    I can’t find the Power valve seal for my 97 yz250 just cover gasket

  • @joshbannon8989
    @joshbannon8989 3 ปีที่แล้ว

    Where can I find the spring? Called parts place they say it’s discontinued. Do you know if there is another engine or year that will work?

    • @Keith1212
      @Keith1212  3 ปีที่แล้ว

      did you look up the make model and year on partzillas website? Thanks for watching!

    • @joshbannon8989
      @joshbannon8989 3 ปีที่แล้ว

      @@Keith1212 I got one for a later model and made it work. Thanks!

  • @southbay281
    @southbay281 8 ปีที่แล้ว

    my linkages is broke. I just rebuilt the clutch side. I just need to start temporarily. will it start with out the linkage ?

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว

      yes it will start, but it won't rev out properly on the high end. Thanks for watching!

  • @dezertdestroyer7782
    @dezertdestroyer7782 4 ปีที่แล้ว

    Dude if it wasn’t for your video I would’ve never gotten this power valve back together properly I had the parts correct it’s just the spring thing I didn’t know you had to spread it open

    • @Keith1212
      @Keith1212  4 ปีที่แล้ว

      I'm glad the video helped you! Thanks for watching!

    • @Keith1212
      @Keith1212  4 ปีที่แล้ว

      @Stay off my lawn Your welcome and thanks for watching!

  • @davidsugitanoto4708
    @davidsugitanoto4708 4 ปีที่แล้ว

    Does power valve give impact for emission?

  • @brentmutersbaugh2892
    @brentmutersbaugh2892 9 ปีที่แล้ว +1

    what does the cover look like

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว

      +Brent Mutersbaugh Same shape as the outline you see in the video. Has four bolts and a gasket to hold it on. You can look up the scemetic of the bike and see the cover on bike bandits website. Just search the year make and model.

  • @The_unsupervised
    @The_unsupervised 9 ปีที่แล้ว

    i have a 96 yz250 and the power valve linkage will not move when it it running the valve moves smooth and there is still tension on the linkage but when it gets into the high rpm the linkage will not open the valve. any ideas?

    • @flyingfencepost
      @flyingfencepost 8 ปีที่แล้ว +1

      +glenn mo Sounds like your YVPS Governor is maybe not working correctly. If there is no tension on the actuator arm then something is definitely wrong. Take off the right side engine cover and inspect the power valve governor.

  • @bmxcrew24
    @bmxcrew24 4 ปีที่แล้ว +1

    Where can you order the spring I can’t find it

    • @lardass69
      @lardass69 4 ปีที่แล้ว

      You ever find a spring?

  • @thomasryan4325
    @thomasryan4325 6 ปีที่แล้ว +2

    Nice to know !

    • @Keith1212
      @Keith1212  6 ปีที่แล้ว

      Thanks for watching!

  • @EkonRekon
    @EkonRekon 4 ปีที่แล้ว +1

    thanks man

  • @kevinstearns4198
    @kevinstearns4198 9 ปีที่แล้ว

    so its making the opening bigger for the exhaust. why not leave it out?

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว

      +Kevin Stearns It's all about the port timing on a 2 stroke exhaust. smaller port equals more power down low. Larger port means more power on the top end. And everything in between! With out the power valve you would have a lot of top end but no low down torque. You would have some but not as much as you could have.

    • @kevinstearns4198
      @kevinstearns4198 9 ปีที่แล้ว

      +Keith1212 your right it has all top end. ill put them in and leave them pinned opened.im not hooking all that shit back up.

  • @GoonRides
    @GoonRides 4 ปีที่แล้ว +2

    THANKS

  • @Sunrisecycles
    @Sunrisecycles 8 ปีที่แล้ว

    I was taking apart my power valve linkage on my 98 yz250 and pulled up on the linkage and now it's stuck in the highest position any thoughts?

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว

      +David Ray you may have let the dowel that holds the governor on in the bottom end get stuck. you would have to remove the clutch cover to see. This normally happens if you flex the linkage with out the governor flexing it due to engine rpm. I'd take the clutch cover off as i mention and be sure the dowel is in the proper position.

    • @Sunrisecycles
      @Sunrisecycles 8 ปีที่แล้ว

      +Keith1212 thanks man I'll be sure to look into that

    • @Sunrisecycles
      @Sunrisecycles 8 ปีที่แล้ว +1

      +Keith1212 hey I figured it out one of the balls in the governor wasn't in the star. Popped back in place works great now

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +1

      great! glad you figured it out!

  • @ianswain8921
    @ianswain8921 8 ปีที่แล้ว +1

    Thank you for the video helped a ton, but now I can't find anywhere to order the return spring...

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +2

      This should have the parts your looking for. Thanks for watching!
      www.partzilla.com/parts/search/Yamaha/Motorcycle/1996/YZ250H1/GOVERNOR/parts.html

  • @capsitan
    @capsitan 5 ปีที่แล้ว +1

    How do you remove the powervalve?

    • @pyro_p5999
      @pyro_p5999 4 ปีที่แล้ว

      Nw-lifecycle check his video out on complete rebuild on 94yz250

  • @chillycheeze2207
    @chillycheeze2207 3 ปีที่แล้ว

    You still operating on this channel? Id love to ask a few questions relating to the power valve where the two valve halfs meet. Hope to hear from you.

    • @Keith1212
      @Keith1212  3 ปีที่แล้ว +2

      yes I am although I don't upload as much due to work. feel free to ask any questions you have

  • @billb.7184
    @billb.7184 4 ปีที่แล้ว

    Thank God....thank you !!!

  • @norso6495
    @norso6495 3 ปีที่แล้ว

    Can anyone help with spacer ideas???

  • @michael.filipenses4132
    @michael.filipenses4132 8 ปีที่แล้ว

    im missing the exact same parts what are they called??

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว

      Some of the smaller pieces on the video not listed on partzilla I had to make. Pretty simple if you have a garage full of bits and bobs. Thanks for watching!

  • @superdave3894
    @superdave3894 3 ปีที่แล้ว

    Does the cover have a gasket

  • @jimarcher3711
    @jimarcher3711 3 ปีที่แล้ว

    Be careful of levering the link arm up like that, it takes the spring tension off the governor ramp, and can let the drive pin drop out.
    Looking at how far the valve arm is dropping down, the closed stop - part of the bush assembly on the left side - is getting worn, and this lets the valve rotate further down and contact the piston. You need to check this between top end inspections.

  • @yeraybautistareyes9986
    @yeraybautistareyes9986 6 ปีที่แล้ว

    Hola cómo pondría apunto la válvula de escape de un Yamaha yz 250 93 por la pongo como la pone en el vidio y no abre xq primera sequedad rebulacionada pero en baja 2ya la abre la válvula un saludo

  • @Paledales
    @Paledales 7 ปีที่แล้ว

    What size is the bolt my 92 is missing it? Good video helped out a lot btw

    • @Keith1212
      @Keith1212  7 ปีที่แล้ว

      I don't know the size for sure, chances are your not gonna find it at a local hardware store though. It's part #5 on this diagram. www.partzilla.com/parts/search/Yamaha/Motorcycle/1996/YZ250H1/GOVERNOR/parts.html Thanks for watching!

    • @TheBOOM509
      @TheBOOM509 4 ปีที่แล้ว

      Did you ever find out what size bolt you needed? Working on a 1990 yz250 and I'm pretty sure they're the same engine

  • @dorianjames9798
    @dorianjames9798 4 ปีที่แล้ว

    Nice

  • @anaclaramelquiades7554
    @anaclaramelquiades7554 3 ปีที่แล้ว

    Some segments in the video are stamped not adjacent to each other

  • @haydenb8853
    @haydenb8853 5 ปีที่แล้ว

    I fucking love you

  • @sambuvca22
    @sambuvca22 9 ปีที่แล้ว +1

    O rings

  • @McManus667
    @McManus667 5 ปีที่แล้ว

    5 years too late, but you can order that spacer. It's in the Cylinder Head diagram part# 3JE-11937-01

  • @sharenewidney3226
    @sharenewidney3226 10 ปีที่แล้ว +1

    I LEARNED HOW TO TEAR APART AND PUT TOGHTHER ALMOST EVERYTHING ON MY BIKE JUST A FEW IM UNSURE

    • @Keith1212
      @Keith1212  10 ปีที่แล้ว +1

      If there's any thing else I can help with let me know!

  • @Mike-wc7em
    @Mike-wc7em 8 ปีที่แล้ว +1

    1989-1990 ?

    • @Keith1212
      @Keith1212  8 ปีที่แล้ว +1

      Sorry I missed this comment. I wouldn't be sure on those years, but If I had to guess there different. Thank you for watching.

  • @kevinstearns4198
    @kevinstearns4198 9 ปีที่แล้ว +1

    i dont have a yz.

  • @patbrooks4308
    @patbrooks4308 ปีที่แล้ว

    I broke my bolt off

  • @brentmutersbaugh2892
    @brentmutersbaugh2892 9 ปีที่แล้ว

    I did not see a cover

    • @Keith1212
      @Keith1212  9 ปีที่แล้ว

      +Brent Mutersbaugh There's one on ebay atm. On ebays page next to the search bar click advanced. Then on the page it opens on the left side click "by item number" and search for this number "111857418284". That's the same as the one for yz250.