I’ve used pinless blades and they do work but they have a tendency to slip out of the jaws so I think it’s worth the extra cost to just get the proper blades
Hello. Are pegas saw blades suitable for this machine? the manufacturer Einhell specifies a blade length of 133mm and the pegas has a blade length of 130mm.
I don’t know if those blades will work since I don’t know what pegas blades are. If they are 130mm long, they should work since it’s just a 3mm difference on a spring mechanism.
Hello and thank you for your breakdown , I hope you can advise me , I inherited a power craft pfz-400rn,, the wonderful Axminster tools suggested Pegas Blades would you know anything about flat or pin ! for my Powercraft , no manual with it or dust blower , but I am determined to give it a go . Trouble is i live in Bulgaria so cant just pop to a well known store . Thank you good luck !
Thank you for watching. I don’t know much about blades but if your machine can take pin blades I would definitely recommend them. I am currently using flat no-name blades I bought from a craft store, they work fine but take a bit of fiddling to change them.
Grato pelo vídeo. Estou com problemas na minha. Quando ligo o potenciómetro só quase no fim é que o motor liga, e lento. Já o testei e está bom. Alguém sabe qual a causa? Obrigado
Thanks for taking the time and sharing with us good on ya mate 👌👌👍👏 I think all these scroll saws are the same manufacturer just different colours 🤷♂️🤔 and different prices 🤷♂️
you are sooooooo wrong in assuming that !!!! What you are saying is that the Less expensive Motorcars are all the same underneath the paint ?????? PLEASE GROW UP !!!!
A lot of cars share the same parts. There are certainly many models from different brands that underneath the interior and the body work are more or less the same car mechanically. Just look at all of the budget scroll saws from different brands and a good amount of them will look the same.
Hello :)) Thanks for the review, I´m thinking of buying this, it´s my first scroll saw, but I´m looking to use it a lot, it´s to saw patterns to build toys, cars and so on... so do you recommend ??
Can you show close up for removing blades
Hi. Thanks for the review. Do you know if these can take pinless blades?
I’ve used pinless blades and they do work but they have a tendency to slip out of the jaws so I think it’s worth the extra cost to just get the proper blades
@@toolreviewsandrestorations thanks. The only issue with the pinned blades is that I want to make small pilot holes and they don’t fit through
@jasmindrace The pinless blades will work as long as you don’t put a lot of pressure on the blade whilst cutting
@@toolreviewsandrestorations thanks so much. I love your videos and it gives me hope that one day I can create beautiful wooden pieces like you. ❤️
Hi! Is it possible to use pinless blades in this model?
Yes although it’s a bit tricky to get them in. Thank you for watching!
@@toolreviewsandrestorations Thank you! Your answer helps me alot.
You’re welcome!
@Jej-C Game Play it's not very loud. The vacuum cleaner that I connect to the scroll saw makes more noise .
(I'm not Polish but I'm leaving in Warsaw)
No, the saw is not very loud, the vibration is the loudest part but if you put the rubber feet on it it should be fine. Thank you for watching!
Hello. Are pegas saw blades suitable for this machine?
the manufacturer Einhell specifies a blade length of 133mm and the pegas has a blade length of 130mm.
I don’t know if those blades will work since I don’t know what pegas blades are. If they are 130mm long, they should work since it’s just a 3mm difference on a spring mechanism.
@@toolreviewsandrestorations Thank you. Respect from Poland
it dos not matter what blade you use a long as if fits it
Que sierra usas?
Hello and thank you for your breakdown , I hope you can advise me , I inherited a power craft pfz-400rn,, the wonderful Axminster tools suggested Pegas Blades would you know anything about flat or pin ! for my Powercraft , no manual with it or dust blower , but I am determined to give it a go . Trouble is i live in Bulgaria so cant just pop to a well known store . Thank you good luck !
Thank you for watching. I don’t know much about blades but if your machine can take pin blades I would definitely recommend them. I am currently using flat no-name blades I bought from a craft store, they work fine but take a bit of fiddling to change them.
Grato pelo vídeo.
Estou com problemas na minha.
Quando ligo o potenciómetro só quase no fim é que o motor liga, e lento.
Já o testei e está bom.
Alguém sabe qual a causa?
Obrigado
Thanks for taking the time and sharing with us good on ya mate 👌👌👍👏 I think all these scroll saws are the same manufacturer just different colours 🤷♂️🤔 and different prices 🤷♂️
Thank you for watching! I wouldn’t be surprised if most of the less expensive scroll saws were the same saw underneath the paint...
you are sooooooo wrong in assuming that !!!! What you are saying is that the Less expensive Motorcars are all the same underneath the paint ?????? PLEASE GROW UP !!!!
A lot of cars share the same parts. There are certainly many models from different brands that underneath the interior and the body work are more or less the same car mechanically. Just look at all of the budget scroll saws from different brands and a good amount of them will look the same.
Good
Hello :)) Thanks for the review, I´m thinking of buying this, it´s my first scroll saw, but I´m looking to use it a lot, it´s to saw patterns to build toys, cars and so on... so do you recommend ??
It works great for me but I don’t use it a lot so I don’t know how long it would last being used all the time.
Merci
For the love of god please use gloves if you have any fingers left!!
No help whatsoever