HOW TO USE BOSCH PBD 40 & MY HONEST REVIEW
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- What's up mate? Today I am sharing with you all about the bench drill I have in my workshop, this brand is called Bosch and the name of the product is PBD 40. During the video I share how to use the drill and some tips, also all the features I learned so far.
TIME STAMP:
00:00 - 01:53 SPECIFICATIONS ABOUT THE BOSCH PBD 40
01:54 - 02:48 HOW TO USE THE BOSCH DRILL PRESS VISE
02:51 - 05:36 HOW TO USE THE BOSCH PBD 40 DRILL PRESS
06:08 - 06:45 HOW TO DRILL A BOLT WITH A DRILL PRESS
07:11 - 08:27 HOW TO MEASURE THE DEPTH OF A WHOLE USING A DRILL PRESS
08:44 - 09:11 HOW MUCH IS THE BOSCH DRILL IN EUROPE
Let me know if you have tried any BOSCH TOOLS? Which one?!
Thank you for the clear explanation of the Chuck. I’ve never had a drill like this, until I bought the Bosch PBD 40 and I couldn’t figure it out 👍👍👍
Useful review - thanks! I wish my garage was as tidy as yours!
I have a Bosch POF 1400 router and an old corded drill, both of which have been great. I was planning on getting this drill press, and your review has sealed the deal! Thanks.
I’m glad it helped! Enjoy it!
Imho. Bosch makes good midrange average consumer products. I own a few products from Bosch and I'm very satisfied with the cost and reliability.
FYI someone also made a review of this drill press and he said there is some play in the chuck. He exchanged it for a different one that has less play and can hold 1 mm drills instead of the original one that can hold 1.5 mm drills.
Soon I'm going to get myself this drill press and also change the chuck.
Definitely a good drill press and perfect footprint too.
The drill looks awesome.
The chuck has quite a lot of runout, but it is perfectly fine if you don't need extremely accurate holes and there is a replacement one available which has lower runout. On mine the laser isn't lined up correctly. I haven't bothered to adjust it because I don't rely on it to line things up. Otherwise all the other features are great and I'd definitely buy it again.
Hello, do you have the ref for the small vise ? Many thanks
I've never seen anyone adjust the chuck in this drill the way you do.. As I understand it, first you tighten using the upper and lower wheels and once tight you rotate the lock collar to the lock position. I wonder though if your method results in a more secure grip on the drill bit as mine sometimes seize while the hole is still very shallow, and the chuck continues to spin..
Thanks
Is it possible to fit square hole drilling bit?
Hi, can this Bosch drill have its body swing 180 degrees around the main post to the back so that base plate is out of the way, to drill some thick or long stock, or dog holes on a bench? Thank you !
unfortunately, no. i have the pbd 40 myself and have often wished for the same thing.
hi, do you know if there is a suitable mortising attachment available that would fit this model?
Hi there, if there is will be on their websites, nothing else..
How accurate is the laser? Is there any way to adjust it for precision? Thank you :)
Hi there, it’s pretty accurate, only thing I noticed is that with certain big drills the “X” doesn’t show very well or at all.
I’m not aware of anyway of adjusting it to be honest..
@@davidsworkshop6913 Thanks for your quick reply! - I've just ordered one of these, and I hope the laser comes accurate from the shop, but after commenting, I did happen to find one terrible video and some pictures on Flickr of all places, which may come in handy for you (or other viewers) at some point in your machine's lifetime. I will link them in a separate comment below, in case they get caught up in some kind of filter. Hopefully they'll both come through. Turns out, when you remove your machine's green plastic cover, there are a couple of grub screws which can be used to tweak the laser's position. - Thanks again!!
What were the links please?
@@chrissnowden7078 My comments have been removed… and when I try to describe to you where to find them, that comment is also removed. Please search google for PBD-40 adjust laser - the first couple of hits should lead you to good results.
What is the model if the little vise you are using?
Ciao Alex, is this one
www.wolfcraft.com/products/wolfcraft/en/EUR/Products/Workshop-Equipment/Vices/Machine-Vice/p/P_3423
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻