You should check the instructions for the Prinsu light bar brackets. You installed them onto the black bar on the top of the rack but I'm 99.9% sure they actually go on the silver bar that the fairing mounts to. Where you pointed to the downward angled piece blending into the fairing, that angle ends up being vertical. Your driver's side would get flipped upside down and moved to the passenger side and vice versa. The reason they go on fairing is that you can have the fairing at multiple positions on the front of the rack and so the light bar would just move with the fairing. If it got mounted to the black bar, the light is really high and far back from the fairing cutout. Some light bar and fairing positions might work as you built it but a low, skinny light and low fairing will have excessive cutoff. You had to aim your light high to compensate. Hopefully this helps put your light into a better position with respect to your fairing cutout instead of being set so far back.
Which low profile bracket from cali led did you end up putting on instead of the bracket you initially installed with the one you order directly from prinsu?
The Baja designs light bar back lighting looks like a true amber? Like it matches the grill lights amber. Is that the case? Wondering because I like the amber a lil more for my truck to match rest of turn signals and things instead of the selective yellow that Baja designs is calling amber. Any info?
I dont want to use the crappy switches that the harness comes with.. i want to use my own toggle switch so to separately turn on the amber and white, i have to use 2 differ switches right?
Which pattern are you running with the mixed amber+white setup? Is there a noticeable difference offroading with the amber+white? Looking to swap my lenses to have them like yours with ambers on the ends
I switched just because the baja amber was a different shade as the cali raised amber and I liked my baja ditch lights also if you look at my truck now on IG you see another reason why I went baja everything
@@EnriqueG_s550 Thanks man! Going for the same exact look but couldn't find anything similar. Only one was the OnX6 and didn't want to spend that much on a lightbar. The S8 is perfect with the retrofit.
@@EnriqueG_s550 at some point can u do a review on ur s8 in action too? I’m lookin at gettin a s8 50” next year I’m hoping, but unsure still, do u get bad glare with it?
You should check the instructions for the Prinsu light bar brackets. You installed them onto the black bar on the top of the rack but I'm 99.9% sure they actually go on the silver bar that the fairing mounts to. Where you pointed to the downward angled piece blending into the fairing, that angle ends up being vertical. Your driver's side would get flipped upside down and moved to the passenger side and vice versa. The reason they go on fairing is that you can have the fairing at multiple positions on the front of the rack and so the light bar would just move with the fairing. If it got mounted to the black bar, the light is really high and far back from the fairing cutout. Some light bar and fairing positions might work as you built it but a low, skinny light and low fairing will have excessive cutoff. You had to aim your light high to compensate. Hopefully this helps put your light into a better position with respect to your fairing cutout instead of being set so far back.
Thanks for the info off camera I actually figured that out and did exactly that with the mounts.
Which low profile bracket from cali led did you end up putting on instead of the bracket you initially installed with the one you order directly from prinsu?
The Baja designs light bar back lighting looks like a true amber? Like it matches the grill lights amber. Is that the case? Wondering because I like the amber a lil more for my truck to match rest of turn signals and things instead of the selective yellow that Baja designs is calling amber. Any info?
I dont want to use the crappy switches that the harness comes with.. i want to use my own toggle switch so to separately turn on the amber and white, i have to use 2 differ switches right?
Which pattern are you running with the mixed amber+white setup? Is there a noticeable difference offroading with the amber+white? Looking to swap my lenses to have them like yours with ambers on the ends
Looks awesome. You're doing great.
Can you show the wiring of this? I've got the backlights working but when wired up to a cali raised switch, the bar won't come on
dont be a dooosh with those light bars at night. or ya'll will face random bats to the bar lol
Was there a reason you switched from Cali raised to Baja besides the colors ? How was the output on the cali’s ?
I switched just because the baja amber was a different shade as the cali raised amber and I liked my baja ditch lights also if you look at my truck now on IG you see another reason why I went baja everything
Did it work with the lights pointed up?
Where did you get those bar brackets ?
Number 4# other great video
does the back light function come stock on the S8?
I can't find them brackets
Selling the cali raised bar?
Do you have a link to that exact lightbar?
www.bajadesigns.com/products/s8-straight-led-light-bar/?sku=704003
Then you just buy replacement amber covers for the outside 2 sections of the bar
@@EnriqueG_s550 Thanks man! Going for the same exact look but couldn't find anything similar. Only one was the OnX6 and didn't want to spend that much on a lightbar. The S8 is perfect with the retrofit.
@@EnriqueG_s550 Is the replacement amber covers on the site or did you call in for that?
@@steventruong85 www.bajadesigns.com/products/s8-light-bar-lens-kit/?sku=708313
Time for fogs to seal the deal
We gettin an update video soon?🤔☺️
I definitely need to do one alot has happened lol
@@EnriqueG_s550 at some point can u do a review on ur s8 in action too? I’m lookin at gettin a s8 50” next year I’m hoping, but unsure still, do u get bad glare with it?
@@CLKACE since this install I've installed a matte hood stamp which does help alot.
Regalame esos raptor lights
Came here for the boring tedious wiring, so sad. :(