Thanks for this video. Removing these screws allows my lens to move. After installing the screws, lens is stuck again. Any ideas? All slots look aligned. I even disassembled the next layer looking for problems but it is ok.
Do you know which part to fix if autofocus is no longer working? I was able to fix the stuck zoom, thanks to this video. But now autofocus works for a few shots, then doesn't work. Manual focus and manually turning the focus ring doesn't seem to work either
i didn't have a zoom problem but i had a autofocus problem , if you open the lense from the back there will be an aray of tiny cogged wheels and a tiny motor that's most likely the part with the problem
thank you for this excellent video - could you please describe the Loctite product type? There are several Loctite threadlocker types - it could (because of color) be THREADLOCKER BLUE 242 type, but please confirm. Thank you.
Just came here to see if I could safely remove the 2 screws that hold on the AF and OS switches, they're slightly rusted and I'd like to be able to remove them, clean them, oil them, dry them and finally put them back in It seems that I can, I'd be okay if I just took one out, cleaned it, replaced it, then did the other one next right?
Or maybe, the two spring clips behind the auto and manual switch have become unaligned and it won’t lift the gear high enough to disengage. Stripped it twice using this vid to find I only had to go 1/4 disassemble to fix it…
So this is the problem with my Sigma lens? Do you charge for your services? My Sigma 17-50 lens is suffering from this same issue. It still works but I basically have to use it as a prime lens since the zoom ring is stuck. How much would you charge to fix mine?
Hi , yes we do repairs for Sigma lenses. Basically this kind of repair is around 120 euro. For more info send email to service@digi-service.eu. Thank you!
I had the same problem, the part that he puts on the lens at 13:24 has a rectangular bar sticking out (on the inside of the part) that needs to line up with its holder on the lens. This is not shown in the video and solved the problem for me. You can check correct alignment by rotating the manual focus ring and see if the inside of the lens moves.
Maybe give the poor thing some cleaning on the way? This is what sets different technicians apart in my opinion. All technicians can fix the problem, but only few will take the extra steps to provide better care to the customer's equipment. Not that the customer was taking care of it anyway, from what I can see.
![SONY A6700 POV STREET PHOTOGRAPHY | SIGMA 18-50mm F2.8 [London]](/img/n.gif)
In today's time & age 😆 what's the repair cost to have the same lens repaired? Thank you
The vid is cool
Thanks for this video. Removing these screws allows my lens to move. After installing the screws, lens is stuck again. Any ideas? All slots look aligned. I even disassembled the next layer looking for problems but it is ok.
Hi send the lens to us :)
Muchas gracias, excelente.
Do you know which part to fix if autofocus is no longer working? I was able to fix the stuck zoom, thanks to this video. But now autofocus works for a few shots, then doesn't work. Manual focus and manually turning the focus ring doesn't seem to work either
i didn't have a zoom problem but i had a autofocus problem , if you open the lense from the back there will be an aray of tiny cogged wheels and a tiny motor that's most likely the part with the problem
great... My lens have this same problem... Where send my equipment and cost more less the repar?
thank you for this excellent video - could you please describe the Loctite product type? There are several Loctite threadlocker types - it could (because of color) be THREADLOCKER BLUE 242 type, but please confirm. Thank you.
Yes it is :)
Excellent Video... I wait for the video of a canon 16-35mm, about diaphragm change.
Hi and thank you:) Will be .... soon :)
@@DIGISERVICEBG How about one for the 18-300 :)
Just came here to see if I could safely remove the 2 screws that hold on the AF and OS switches, they're slightly rusted and I'd like to be able to remove them, clean them, oil them, dry them and finally put them back in
It seems that I can, I'd be okay if I just took one out, cleaned it, replaced it, then did the other one next right?
Thx very much for sharing :)
Hi, thank you for the comment :)
Or maybe, the two spring clips behind the auto and manual switch have become unaligned and it won’t lift the gear high enough to disengage. Stripped it twice using this vid to find I only had to go 1/4 disassemble to fix it…
is there any way that you can explain to me how the zoom works on this sigma and what did you do to fix it?
Hi, everything is in the video :)
@@DIGISERVICEBG hi. if my zoom ring is stiff and not stuck, does the same steps apply?
@@stingraychua7205 Yes :)
So this is the problem with my Sigma lens? Do you charge for your services? My Sigma 17-50 lens is suffering from this same issue. It still works but I basically have to use it as a prime lens since the zoom ring is stuck. How much would you charge to fix mine?
Hi , yes we do repairs for Sigma lenses. Basically this kind of repair is around 120 euro. For more info send email to service@digi-service.eu. Thank you!
@@DIGISERVICEBG Euro? Where is your company based? I hope in the US. I don't know how to ship a lens overseas.
@@agentbl you can use easily USPS to Bulgaria. We are located in Bulgaria and we have a lot clients from USA and Canada.
Hola que lubricante usas
Hola, no lubricante ha usado.
Mine autofocuses but error 01 appears when i take a shot, what might be the problem? I already cleaned the contacts
Exchange the flex
what size screwdrivers?
Hi, Wiha PH00x40 PH00X60.
mine has some screws that are so tight that they ccannot be screwed off, and i stripped some of them, what is the solution?
Use stronger screwdriver.
Mine can't rotate
My lens does not focus right after I fixed this. What could it be? Pls help me
I had the same problem, the part that he puts on the lens at 13:24 has a rectangular bar sticking out (on the inside of the part) that needs to line up with its holder on the lens. This is not shown in the video and solved the problem for me. You can check correct alignment by rotating the manual focus ring and see if the inside of the lens moves.
Maybe give the poor thing some cleaning on the way? This is what sets different technicians apart in my opinion. All technicians can fix the problem, but only few will take the extra steps to provide better care to the customer's equipment. Not that the customer was taking care of it anyway, from what I can see.
soundtrack PLZ ))))
No freaking way I can do this one! What's my other option 🤔. 🗑?
HI send the lens to us and we can fix it for a very reasonable price. Thank you!
If this is a norm why it's no recall on this over priced crap?
HI send the lens to us and we can fix it for a very reasonable price. Thank you!