Awesome suspension mods.. 👍👍. Also like the way the rack has been set up to make installation of the rtt quick and easy. 70th anniversary lights look tops 🍻
I love your honesty , you forgot the track correction devices which look remarkably like the ones I use and haven’t had a problem with, they always spark up a good debate as well, keep the great vids coming.
Follow up to masterpiece 🤔🤔🤔gob smacked speechless …. I can only dream ❤️ Eat ya heart out Ronnie and Andrew this is my learned choice thanks for trying but MAB has my vote 👍🏼👍🏼👍🏼
@@ridiculousthings4x4 why not? Increases your rpm by like 400rpm on my 80 series it’s the difference of 45amps coming out of my alternator to 80 amps coming out of my alternator. I use it all the time when winching someone out or charging my lithium battery quicker
It's a 76. If you turn it on, it turns itself off again if you do anything at all, then decides to come back on when it feels like it. It's originally designed for warming up your engine in subzero temps, and on some cars you can't even use it until the ambient temp is low enough
The algorithm experiment will escalate exponentially to exactly the desired intent and you will be moved with a grimace nay perhaps a hint of a smile … now to absorb the lumps and bumps of the rest of the masterpiece.👍🏼👍🏼👍🏼👍🏼 Ps love your stuff brother and joyfully happy your in my reality too … ❤️👍🏼❤️
How well does the K&N filter seal in the standard airbox for dusting? I still run standard filter. But use a Terrain Tamer. Gasket thingy. It's the shape of the airbox. Made of maybe 1.6mm steel. Glued into the inner lip of the lid, of the air box. Adds rigidity and places more pressure on the rubber seals. No more dusting.(A lot used to get past) Its been in there for about 3 years. Spotless. I do a lot of dust offroad.
I've never had an issue with dusting to be honest. The K&N has a fatter seal, but the troopy still uses the factory one, again no issues. The factory one can be fitted incorrectly though, which I think is where the issue comes from.
@@ridiculousthings4x4 I don't think they are all built the same... The dealer was the only hands that ever touched mine for 50k or so. They used to cover the seal with grease. Dusted all the time. A friend of mines 76. Who goes bush every weekend. Does not dust at all.
Thanks mate but a minor reflection of your good self👍🏼👍🏼👍🏼👍🏼 And besides I was just stating the obvious. Looking forward to more engineering wisdoms from the Master And Beast🤔😂😂😂👍🏼👍🏼👍🏼
Hey mate, I was just wondering if you've ever considered a iDrive throttle controller, could be handy off road on the rough tracks, check them out one day. Seeya Rob
Against popular opinion, I don't actually rate them. I'd rather have consistent throttle response over a feedback loop adding or removing gain and dampeners. Each to their own though.
76 looks awesome with the 35's, how will you go for the legality of them? Keep your fingers crossed? Any final opinions on the parabolic springs, yes, no, never again? Keep up the great content!!
It's arguably legal aside from the tyres. No wheel poke, legal lift etc, so I guess it's a mitigated fingers crossed. Apparently the 2016+ models are legal to have 35s without a mod plate for whatever reason. As for the parabolics. They're fantastic but ONLY if modded like I've done. If they're unmodified they're utterly terrible.
Awesome, have you done an install vid on the electric window upgrade? Only real pet peeve in my 76 workmate is leaning over to wind down a window to talk to someone!
Unfortunately not. They came with the car when I bought it, but I replaced one of the door lock actuators a while ago and had a look. It just a kit you can buy online.
Great vid mate I own a 2021 76 series landcruiser and was wondering if you have a good idea to stop the wind noice from the driver side a pillar I have tried a stick on rubber strip will no success
I've never had the issue although I've heard about it. I've got a safari armax snorkel which might direct the airflow differently when compared to the stock one? It's quite a bit chunkier
Mate rip off the factory grey pinch weld strip and replace it with the black stuff from bunnings with the added bulb on it. It's about 35 bucks per door, fits perfectly, looks factory and literally does about as much on its own as what soundproofing your entire cab does. Wind noise gone
Awesome suspension mods.. 👍👍. Also like the way the rack has been set up to make installation of the rtt quick and easy. 70th anniversary lights look tops 🍻
Hi mate 🤠👋
Shad 👍🍻
just making a comment for the algorithm to kick in :)
I love your honesty , you forgot the track correction devices which look remarkably like the ones I use and haven’t had a problem with, they always spark up a good debate as well, keep the great vids coming.
I'll talk about those when I want to throw stones at wasps nests 😅 "Facebook knows best" as it's the blind leading the blind.
Ha ha ha
Follow up to masterpiece 🤔🤔🤔gob smacked speechless …. I can only dream ❤️ Eat ya heart out Ronnie and Andrew this is my learned choice thanks for trying but MAB has my vote 👍🏼👍🏼👍🏼
Simon Crawford you're my hero
Can you make a video showing exactly what you did in the guards to fit the 315’s? Cheers mate great video.
Thanks for sharing all your tricks and tips without any affiliation with anyone apart from yourself. Like your work👍
😀
Idle up is useful for upping your alternator output at idle for winching or recharging your battery quicker
No, it's not.
@@ridiculousthings4x4 why not? Increases your rpm by like 400rpm on my 80 series it’s the difference of 45amps coming out of my alternator to 80 amps coming out of my alternator. I use it all the time when winching someone out or charging my lithium battery quicker
It's a 76. If you turn it on, it turns itself off again if you do anything at all, then decides to come back on when it feels like it. It's originally designed for warming up your engine in subzero temps, and on some cars you can't even use it until the ambient temp is low enough
@@ridiculousthings4x4 bugger that’s a shame the old dumb idle ups are handy in my opinion
Awesome setup. Even better outro! Lovely darts 👍
Awesome
I watched the last 30 seconds several times and shared it
Favourite TH-cam channel
It's my favourite 30 seconds too 😅
The algorithm experiment will escalate exponentially to exactly the desired intent and you will be moved with a grimace nay perhaps a hint of a smile … now to absorb the lumps and bumps of the rest of the masterpiece.👍🏼👍🏼👍🏼👍🏼 Ps love your stuff brother and joyfully happy your in my reality too … ❤️👍🏼❤️
Nohomo?
How well does the K&N filter seal in the standard airbox for dusting?
I still run standard filter. But use a Terrain Tamer. Gasket thingy. It's the shape of the airbox. Made of maybe 1.6mm steel. Glued into the inner lip of the lid, of the air box. Adds rigidity and places more pressure on the rubber seals. No more dusting.(A lot used to get past)
Its been in there for about 3 years. Spotless. I do a lot of dust offroad.
I've never had an issue with dusting to be honest. The K&N has a fatter seal, but the troopy still uses the factory one, again no issues. The factory one can be fitted incorrectly though, which I think is where the issue comes from.
@@ridiculousthings4x4 I don't think they are all built the same...
The dealer was the only hands that ever touched mine for 50k or so. They used to cover the seal with grease. Dusted all the time.
A friend of mines 76. Who goes bush every weekend. Does not dust at all.
Great video mate, well done
Love the outro
Thanks shad. I'm sure we've all wanted to say it at some point 😂
@@ridiculousthings4x4 yep 😂😂
I can't be here while live. Make a flex comparison video with like a jeep and a stock 76
I don't happen to have both of those vehicles knocking around in my post production 😅
Nice one matey!! 😎😎
Thanks mate but a minor reflection of your good self👍🏼👍🏼👍🏼👍🏼 And besides I was just stating the obvious. Looking forward to more engineering wisdoms from the Master And Beast🤔😂😂😂👍🏼👍🏼👍🏼
Roof rack setup is bloody good!
creative and funny
for the algorithm! +1 Like
Fridge on the right. Interesting.
Yup. Seems logical to me as it doesn't obstruct the rear passenger or rear window
Love ya work mate, well done 👍👍
Hi Grant 👍
@@shaddonaghue hey buddy, hope you’re well 👍
The Kmart rear bar looks neat and tidy
good stuff mate, love it. Cheers Steve
Hey mate, I was just wondering if you've ever considered a iDrive throttle controller, could be handy off road on the rough tracks, check them out one day. Seeya Rob
Against popular opinion, I don't actually rate them. I'd rather have consistent throttle response over a feedback loop adding or removing gain and dampeners. Each to their own though.
Bcdc is just a model number Battery Charger Direct Current acronym
And there I was thinking it meant "burnt cereal derailed Concord"
Awesome video as always 🤙🤙
Pretty cool mate. Love your practical approach to things. Learnt a few things. Part # for the clock spring please?
Not practical enough to make the front page of magazines 😏 84306-0K051 from the listing. I paid $18. How they can profit from this I do not know.
76 looks awesome with the 35's, how will you go for the legality of them? Keep your fingers crossed? Any final opinions on the parabolic springs, yes, no, never again? Keep up the great content!!
It's arguably legal aside from the tyres. No wheel poke, legal lift etc, so I guess it's a mitigated fingers crossed. Apparently the 2016+ models are legal to have 35s without a mod plate for whatever reason. As for the parabolics. They're fantastic but ONLY if modded like I've done. If they're unmodified they're utterly terrible.
I want this channel to grow
Hey me too! Thanks for the support
Awesome, have you done an install vid on the electric window upgrade? Only real pet peeve in my 76 workmate is leaning over to wind down a window to talk to someone!
Unfortunately not. They came with the car when I bought it, but I replaced one of the door lock actuators a while ago and had a look. It just a kit you can buy online.
Does
love your work!
Thoughts on the flashlube catch can which has a pressure release and vacuum relief valve?
I don't really rate any over each other. EGR removal renders them a bit pointless and will always be more effective than any catch can
Delightful
Shout out to the random loose wire 👋
😅 it says hi
You tell those pub experts or so called experts
Something.
Cool jacket.
Laughed more than is acceptable at this
Great vid mate I own a 2021 76 series landcruiser and was wondering if you have a good idea to stop the wind noice from the driver side a pillar I have tried a stick on rubber strip will no success
I've never had the issue although I've heard about it. I've got a safari armax snorkel which might direct the airflow differently when compared to the stock one? It's quite a bit chunkier
Mate rip off the factory grey pinch weld strip and replace it with the black stuff from bunnings with the added bulb on it. It's about 35 bucks per door, fits perfectly, looks factory and literally does about as much on its own as what soundproofing your entire cab does. Wind noise gone
Did you make your own drop-shackles? If so, is there a video on how you did it?
No video unfortunately. I picked up a set for another vehicle for cheap, and made the top 50% myself using the original bolts and bushes.
Hey mate what type of roof top tent are you using ? I'm looking for one and they are abit expensive. Thank you
It's a motop 120 V4. Only issue I've had is my feet are a bit cramped at the bottom.
How do you run the cables from the roof rack down into the engine bay?
Down the back of the snorkel. I made a clamp that bolts on to the snorkel bracket.
Hello :)
Algorithms rule the tubes
This
But you told me to comment
Help
With
You
Your
My commen
Something
Experiment
Something in the comments and reply to someone else's comment
I don't care for comments
so here I am commenting on nothing
And here I am commenting on commenting on nothing
+1 nothing
Something