Carbon Fiber Rear Diffuser and Front Splitter Replacement Installation | MK5 Toyota Supra

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • 👋 Check out these new carbon fiber parts for the Supra! Today I install the Rexpeed V1 full replacement front splitter. This replaces the satin back front splitter with genuine carbon fiber. It also has larger ends to be much more aggressive than stock and look similar to the Carbon Edition Supra. The rear diffuser I install goes over the stock plastic diffuser. However you will need to cut off the stock fins to fin the new piece. I also ad the rear V1 side spats to complete the look and really give the Supra and aggressive look! These parts do take some time to install and you'll need to remove the front bumper of the Supra too. Removing the front bumper on the Toyota Supra really isn't hard at all and it makes the splitter much more straight forward. I also used this opportunity to touch up some of my vinyl wrap and get rid of some wrinkles. New carbon fiber Rexpeed parts on the Supra looks so cool and just continue making the Supra looks aggressive. In this video, we're going to be covering the installation of a carbon fiber rear diffuser and front splitter on a MK5 Toyota Supra. This diffuser kit gives the car a much needed aggressive look and provides increased aerodynamics and give the car a more sporty feel. If you're looking to upgrade your car's look and performance, then be sure to check out this diffuser kit for the MK5 Toyota Supra! This kit not only looks great, but it will also make your car run better and perform better in all conditions. So let us help you upgrade your car's look and performance today! These parts come with hardware to install and secure. I chose to not bolt in the front splitter and rear side spats, and just used 3M tap on the paint. I screwed them into the underside tho. Nice that you can either bolt them to your bumpers or just use adhesive.
    Rexpeed Carbon Diffuser: brosfourrspeed...
    Rexpeed Carbon Side Spats: brosfourrspeed...
    Rexpeed V1 Carbon Front Splitter: brosfourrspeed...
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    MASSIVE Carbon Fiber Rear Diffuser and Front Splitter Replacement Installation | MK5 Toyota Supra
    Music By: www.epidemicsound.com
    #suprafrontbumperremoval #suprafrontsplitterinstall #suprareardiffuserinstall

ความคิดเห็น • 39

  • @davidnilles3117
    @davidnilles3117 ปีที่แล้ว +2

    Great job,Brian. I love how the new diffuser matches the rear spoiler. Also matching those little side pieces back there. The look is coming together really well! 👍

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว +1

      Thanks! It all fit so well and really complements the design of the car for sure!

  • @chrisginoc
    @chrisginoc ปีที่แล้ว +1

    I'm happy you've been rolling out more mods recently on the A90. Keep them coming.

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      More to come!

    • @chrisginoc
      @chrisginoc ปีที่แล้ว +1

      @@BrosFOURRSpeed I know it's not as fast as the M2, but I have a ton of smiles per gallon driving my Supra 6MT. Just installed a downpipe yesterday and sounds mean.

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      @@chrisginocnice! The Supra does handle better and is a bit more driver focused. So it’s a great option for just driving and having fun. M2 offers most of that but has the extra practicality. So Supra is definitely a great choice for pure fun

  • @oreally8605
    @oreally8605 ปีที่แล้ว +1

    Yay!!!! Boxes!! Car parts!!! 😊 I hope you don't take all that off when it's time to sell it 5 years from now lol. Looks sweet! Nice upgrade Brian!

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      Loving the mods! When the time comes to sell the car, I’ll see if it makes sense to sell the car modded or part it out. Probably will part it out so a bunch of people can get some good used parts.

  • @amill1563
    @amill1563 ปีที่แล้ว +2

    Awesome ground effects kit.

  • @RicardoSammy-e8d
    @RicardoSammy-e8d 11 หลายเดือนก่อน +1

    You should check out the new Rexpeed V10 carbon fiber diffuser for the Supra. A complete OEM style replacement unit with large side spats and larger exhasut cutouts to suit aftermarket exhasuts. Definitely better than stick on pieces.

  • @stratusedge2k7
    @stratusedge2k7 ปีที่แล้ว

    Looks good, especially the front additions. Interested in the rear diffuser that you mentioned which connects, wish it covered more of the black parts so it's completely carbon fiber

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      Yeah there are others they offer! I'll have to check those out. But we can source any Rexpeed product

  • @magnetman3t725
    @magnetman3t725 10 หลายเดือนก่อน +1

    I like that home made ramps is that good for lowered cars??

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  10 หลายเดือนก่อน

      Yeah I made them to work with the Supra! Used them so much!

  • @Thebusdriverandgamermorefan
    @Thebusdriverandgamermorefan ปีที่แล้ว +2

    Awesome job dude!

  • @DavidGonzalez-fk8lp
    @DavidGonzalez-fk8lp หลายเดือนก่อน +1

    I put a small ding in my driver side front splitter. I want to replace it. Toyota told me that they might have to do a recalibration for the front sensors due to the bumper removal. Did you run into any issues like this??

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  หลายเดือนก่อน

      I never had any issues.

  • @MKVS5
    @MKVS5 ปีที่แล้ว +1

    Are you thinking of swapping your emblem? The silver portion of mine started to break up under the clear plastic. I checked some forums and it was a common issue and replaceable with warranty. I'm curious if the same problem happened for you after manipulating the bumper. (I'd be happy to buy your old emblem if you replace lol)

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      My old Supra after two years barley started doing that. So far these still look good. If they end up doing that, there are some sweet emblems out there to replace them with that I’d probably do

  • @GotK20
    @GotK20 ปีที่แล้ว +1

    Did you get any warning lights with the front bumper removed? Doesn’t it affect the radar detection in the a90?

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      No not at all. As long as you reinstall everything the way you took it off you won’t get any warning lights.

  • @olivierYF21
    @olivierYF21 ปีที่แล้ว

    Bring back the beast!!!!

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  ปีที่แล้ว

      Which one is the beast? Supra has been some fun!

  • @thoopra
    @thoopra 4 หลายเดือนก่อน

    Disappointed you have to cut that OE fin but either way looks sweet!

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  4 หลายเดือนก่อน

      Yeah. However the stock diffuser is only $300 form Toyota. So not the worst thing to have to cut

  • @adamvalencia1413
    @adamvalencia1413 2 หลายเดือนก่อน +1

    what brand front splitter is that? the one that was taken off

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  2 หลายเดือนก่อน

      That was a Kiss brand. It's been out of stock since I got it. But we have a Rexpeed version that is similar on our site

  • @Chocobohunter
    @Chocobohunter 9 หลายเดือนก่อน

    I have a 2020 s3 and just ordered a supra lol

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  9 หลายเดือนก่อน

      Oh cool! Great duo for sure! We love our S3 and will miss it once we sell it

    • @Chocobohunter
      @Chocobohunter 9 หลายเดือนก่อน

      @@BrosFOURRSpeed yeah i love it mine only has 17k kms on it, but i will probably trade it in to save money on the supra, i dont think i can afford both lol

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  9 หลายเดือนก่อน

      @@Chocobohunterlol fun cars for sure!

  • @EvoSteve89
    @EvoSteve89 8 หลายเดือนก่อน

    Bruh those tail light eye lashes gotta go. Everything else looks good tho man

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  8 หลายเดือนก่อน

      The rear canards?

    • @EvoSteve89
      @EvoSteve89 8 หลายเดือนก่อน

      ​@@BrosFOURRSpeed no, the one piece that extends downwards from the outside edge of each tail light (from the rear corner of the quarter panel), with the two "veins" (they look like eye lashes) coming off of it.
      But, your build, just my 2 cents haha

    • @BrosFOURRSpeed
      @BrosFOURRSpeed  8 หลายเดือนก่อน

      @@EvoSteve89 Yeah those are the Armaspeed rear canards. That’s what they call them. In person they look pretty cool.