#32 How to program arduino NANO using arduino UNO? | PR ROBOTICS
ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2019
- #programarduinoNANO #PRROBOTICS #arduinoprojects #arduino
In this video we will learn how to program your arduino NANO board using arduino UNO R3 board without removing the Microcontroller IC from Arduino UNO.
It's so easy but make sure that your connections are correct. Gather the following components and follow the steps.
:::::::::::::::::::: COMPONENTS USED* ::::::::::::::::
1. Arduino UNO R3
2. Jumper wires
3. arduino NANO
-----------------------------------------
Want to support us? Watch out our previous video and give your valuable suggestions.
*********** PREVIOUS VIDEOS ***********
1. how to use IR sensor as push button
• #30 IR sensor as PUSH ...
2. ULTIMATE arduino project
• #31 ULTIMATE Arduino p...
3. Top 3 basic arduino projects
• #29 Top 3 basic arduin...
4. Darkness level indicator
• #28 DARKNESS LEVEL IND...
*****************************************
Want to support us more? FOLLOW the following links:
SUPPORT US ON:
www.patreon.com/PRROBOTICS
SUBSCRIBE US ON:
/ prrobotics
Thanks for watching😊
Don't forget to like, share and SUBSCRIBE.
#arduino
#programarduinonano
#PRROBOTICS
#arduinoprojects
#arduinoprogramming
#arduinonanoprogramming
#arduinotutorials
#arduinoprogrammingtutorials
#howtoprogramarduinonano
#howtoprogramarduino - วิทยาศาสตร์และเทคโนโลยี
very nice! Wow😊
Muito bom ,sem falar nada ajudou muito !!
Cool!!!😍
Can this be done with an arduino uno smd inplace of nano
Thanks a lot for making this video 👌👌👌
All my pleasure :)
Very usefull. Video bro.. Thank you so much.. Bro... Thank you..
😇😇😇
👌👌👌👌 keep it up.
Thank you 😊
Nice Video👌👌👌. Very good....
Thanks 😊
Hello i have one question do u have a video for this kind of project - Programmer based on arduino nano for writing a boot program - BLUE LUNAR
Stahp Si ah! 🎶🎶🎵🎵🎼🎼
Keep it up bro 👍
Thank you 😊
you solved my problem thank you
My pleasure 🙂
Thank u
very useful video.... i have programmed my nano as i have no mini usb cable....
Thank you 😊
Can i do it with ttl uploader
Thank you so much Bro Thank you
😇
I want to pit the programming of hand gesture control robot
So the coding everything is correct but not getting uploaded
(Coding is quite big so can I do that big coding through arduino uno to nano ?)
Please reply fast
You can upload every code through this method if the code is taking memory which is less the maximum capacity of arduino which you are targeting.
@@PRROBOTICS I have one more question
My arduino nano for programming it showed error so I tried ( old bootloader) but still it shows error
I tried for the com port still no happen
So does that mean I have to take a new nano?
I have created a dedicated video on this topic to resolve the issue while programming arduino nano. So, please go checkout that video once.
@@PRROBOTICS thanks alot for the video it really helped me 😁
It's all my pleasure 😊
I am currently building a project with Arduino uno. I am adding an Arduino Nano to have more pins. Do i have to do this in order for my Arduino Nano to work as an Arduino Uno??? urgent ty
Can you please elaborate your problem? Do you want to use arduino nano in place of arduino UNO?
PR ROBOTICS I am writing one whole code for this project. but as of now im using both uno and nano in my project. do i have to do the same thing in the video to make my whole project work as one?
No. Absolutely not. In this video I am explaining how to program arduino nano if you don't have the cable which is used for programming arduino nano.
Of i am not wrong you actually want to connect your arduino Uno with arduino nano to work as one board.
@@PRROBOTICS I am including the arduino nano into my project because pin 4 on my arduino uno has already been used for my LCD. Therefore, I am now connecting my SD card interface into arduino nano's pin 4.
If you want to use arduino Uno and nano simultaneously. Search google for how to connect two arduino UNO. There is method in which you can use one arduino as master and other as slave.
If you are using I2c interface, don't worry you can use around 127 devices to same pin, and you need some pull up resistors.
Dud i wanted to know what if we remove ic after connection will it work....
You mean to say you are going to remove the smd Atmega 328pu ic from the arduino nano. Then, yes it will perfectly work unless you have any solder bridge.
@@PRROBOTICS i mean to say removing ic of arduino uno i tried in the case of arduino pro mini it worked ...btw nice tutorial
Yes, it will work.
Bro can I upload code to uno from Nano board please tell me in the same process
Yes u can. I haven't created any tutorial on the same. You have to Google it😁
@@PRROBOTICS ok bro no problem ;)
Hi I've done this. But after the program I don't upload any programs to my nano board. I know why???
If you are using jumper wires, please double check the connections
ardiuno nano se ardiuno uno ko led blinking program karen with smartphone
👍👏👏👏
😊😊😊😊
Can I upload code forom Arduino nano to Arduino nano
yes
Bro how to connect arduino uno with arduino nano using Bluetooth module
For that you will need 2 bluetooth modules one as Master and other as slave
@@PRROBOTICS can we use both master and slave with android
Master and slave mode method will work if you want to connect two different arduinos via bluetooth with each other. But if you want to connect both of them to your smartphone, you need to use slave mode for both of them.
¿Y si tengo el pro micro?
también puede programarlo de manera similar.
My problem solved..partially
Do let me if there is anything which I help you further to solve your problem completely.
Hi brother , i am new to arduino but my project need to code in arduino . can you help me in making my project . please contact me
Hey, just keep on learning. Begin with small projects, don't be in too hurry.
The program doesn't get stored inside NANO, it gets uploaded to the UNO instead. Hence on powering the NANO you will find that the NANO doesn't work on the program. it will work only when connected to the UNO. YOU SHOULD HAVE DEMONSTRATED THE WORKING NANO DETACHED FROM UNO.
My friend, the program works on arduino nano not on UNO. Please follow the instructions carefully and try once again.
And the reason for using this method is that the arduino nano which i am using in this video has damaged WCH340C USB to serial convertor IC.
Edited: have you disconnected the arduino nano before uploading your first code to UNO as i mentioned in the video?
It is not working
Please recheck the connections and uploading settings. I used the same setup multiple times.
It's easy to tell that most of the positive comments are fake. This video does not explain anything about the wiring, and just displays a tiny thumbnail that cannot even be read in full screen at best resolution. Additionally, almost none of the menu text in the programming app can be read. This is why more professional looking videos will actually have a voice explaining what they are doing. I can certainly see why a video like this has so few thumbs-up, despite having years to have been viewed. Are you unable to talk? Why not even show a diagram large enough for people to actually see?
Completely useless. Why in the world did Google recommend this??