Haha nice work brother! Just shows what you can achieve with a good clean, few little mods! Send it for a good road trip, rip into it at Summernats and send it back! Nice work mate, enjoyed watching this, look for day to seeming the Monaro build
Love the video all the hard work look amazing. I can't wait till next year summer nats will use the end of this video and be like this behaviour will not be tolerated hahaha don't change love it
The interior trim...the plastic piece that runs across the top of the back window. Did you have that. I did notice it not there...but then you said you later put a lot of the plastic trim in. That breaks easy and is hard to get and there is no repro for them. Just like the hockey molds on the outside
Yeah the JAKEY! From the start of the video, to the sticker and arm band swaps for entry, getting kicked out, debrief chats… this video was just cool my man! Thanks
Really enjoyed the video mate. Just want to ask, how much more do you get by changing intake manifold frontage stock one? On a stock engine would it require tuning afterwords?
Definitely don't 'need' twin throttles. The single plane and TB that Jake has on there is plenty for 90% of people. They just need more compression and better valve events 🤙🏻
@zdravkomomci7570 are you referring to Jake's throttle body? The fact the filter protrudes the bonnet makes his setup illegal most places, but if it fit underneath then it'd be fine. Utilises stock sensors and isn't drive by wire, so stock computer can do it
Like your Cars especially the VL LS1. swapping stickers n Burnouts a mistake now you might not me able go again ? That's what skid rows for and you can enter Summernats again.
Look at the big boy in the brown singlet next to the passenger rear at 16:45 and his mate in the blue singlet getting shoved by security behind the car shortly after. Just before he ripped his brown singlet off and got dropped by red hat.
@unclefester5418 same style though, not a VN wheel was my point, the VP ones were much nicer looking black or grey. Been 25yrs or so since I had my VP SS, memory a bit hazey lol
Would of been a pig of a thing to drive that far on chopped springs. Replace the rears springs with some aftermarket super lows springs and you get the look without the shit ride.
Yeahhhhh the legend @ 4:44 reppin the Torqhub tee ❤ 🤙🏻
Wish you boys coulda been there too!
The 5ltrs sound so good...id rather a 5ltr than an ls any day
Skid got the crowd and “crowd safety” fired up!! 🤛 🤜 🥊 🥊 😂😂
Haha awesomeness. They were booting entrants for nothing this year 😂
No ones driving 12 hours to summernats in a VN on choppys not to drop a banger on tuff st !!
Awesome Jake👍… I’m the guy in the rod shop shirt your saying “later later” to @ 13:05….it was a top weekend & you lived up to your promise bro 👏👏
get into the monaro n motor n box out the vl haha. hopefully i can get a entry to take my xe next year
Oof!
A little to much wax on the boot🤣
Any videos coming up ?
What another fun filled episode keep up the good work 👏
Man, have to keep up the video's. 100% solid aus content
Haha nice work brother! Just shows what you can achieve with a good clean, few little mods!
Send it for a good road trip, rip into it at Summernats and send it back! Nice work mate, enjoyed watching this, look for day to seeming the Monaro build
Grate content as always man keep it up👌 Garry's a bloody legend
I wanna know more about the Munroe sports wagon!!
Top vid once again! Keep it up bro. 👍
loving the Chanel brother keep it up
That kid at 7:45 "Josh's Ecotec doesn't do that" 😆😆😆
What an Adventure!! living the dream.
Love the video all the hard work look amazing. I can't wait till next year summer nats will use the end of this video and be like this behaviour will not be tolerated hahaha don't change love it
Killer video boys. Editing and music was sick. Keep it up.
Solid video congrats on the 10k subs 👍
The interior trim...the plastic piece that runs across the top of the back window. Did you have that. I did notice it not there...but then you said you later put a lot of the plastic trim in. That breaks easy and is hard to get and there is no repro for them. Just like the hockey molds on the outside
Do the manaro build be killer
Best content love me a jakes chop shop vid
That VN is Killa
Looks like you and the boys had a mad time at the Nats 👍
Love that I made it onto the video, I was the dumb ass dressed up as B2
So good bro, was good to meet ya at the pizza stand brother, next year i’ll take ya for a buzz in my berlina
Yeah the JAKEY!
From the start of the video, to the sticker and arm band swaps for entry, getting kicked out, debrief chats… this video was just cool my man!
Thanks
Really enjoyed the video mate. Just want to ask, how much more do you get by changing intake manifold frontage stock one? On a stock engine would it require tuning afterwords?
Nice vn if I had the money I would buy it good work Jake
5ltrs do go when you stroke them to 355 with a twin throttle body setup and 345gears like i had heaps of torque.
Definitely don't 'need' twin throttles. The single plane and TB that Jake has on there is plenty for 90% of people. They just need more compression and better valve events 🤙🏻
@@TorqHubjust curious is that throttle body setup legal on a VN? What computer you running for the throttle body?
@zdravkomomci7570 are you referring to Jake's throttle body? The fact the filter protrudes the bonnet makes his setup illegal most places, but if it fit underneath then it'd be fine. Utilises stock sensors and isn't drive by wire, so stock computer can do it
@@TorqHub thanks
@@TorqHubthoughts on the air filter situation when it's raining?
Keep up the good work! Do a video on the starlet
Happy to see the vl isnt inpounded yet
Dude your lucky you didnt loose you license but on ya
Yea wow, Im chasing some new front vs guards or even a bonnet im just saying
Like your Cars especially the VL LS1.
swapping stickers n Burnouts a mistake now you might not me able go again ?
That's what skid rows for and you can enter Summernats again.
Is that the edelbrock copy intake and stock memcal?
Cool build BTW.
I did drag challenge on bump stops so I know your pain 🤣
I 💗cars!!!! Great vid, thanks for uploading
Oh no I'm In this video at the servo telling you to get up it that's funny as
Some na high revving motor would go good in the Monaro imo
awesome video jake.
Look at the big boy in the brown singlet next to the passenger rear at 16:45 and his mate in the blue singlet getting shoved by security behind the car shortly after. Just before he ripped his brown singlet off and got dropped by red hat.
And the steering wheel is from a VP SS, neat rig, exactly the same as my old mans VN Berlina when he bought it brand new
VP SS steering wheels are black, not grey.
@unclefester5418 same style though, not a VN wheel was my point, the VP ones were much nicer looking black or grey. Been 25yrs or so since I had my VP SS, memory a bit hazey lol
Vn calais steering wheel vp had a round badge on the centre
@dannysmith5147 correct, i had a VN 5.0 Calais before the VP SS, I just looked up old photos to check
how much does it cost to put a car in
308 the world great engines
Hey mate, how much you asking for the vn?
How much are y asking for the vn
Would of been a pig of a thing to drive that far on chopped springs. Replace the rears springs with some aftermarket super lows springs and you get the look without the shit ride.
Good video too
Hi Jake, how do I contact you about the vn???
Wat is next jake morano update customer car updates even work shop one keep videos coming think u need other car hoist
Jake how much u want for it ?
If this don't boost the subs, nothing will....what a mad C_ nt....awesome video.
Wild men 🙌
Always the vn owners
16:54 I watched and filmed this from down the road on my camcorder! haha 😆😆
Ya mates vl is hectic ay
Get the money up
Do a Gemi chichhhh
The want for this reall
ScapperNats UFC
Hardly a Summernats standard car! The organisers seem to except anything these days 😩
How much do you want for the VN ?
it’s up for 16,800 i’m pretty sure
@@djbubblez3511 haha cool cheers mate
How’d you remove the tint bro ?
Clothes steamers work a treat
@@jeepnutscotty cheers legend !
Heat gun, razor blade, goo gone, works a treat
@@JamesGarage06 cheers legend !!
yes great event with thugs & security guards exchanging blows.
Both the same thing
Fiiirst
Ytbbb
Nice work mate how was it on fuel ⛽️ did it have the 80L tank 😊😊😊
Hey mate, how much you asking for the vn?
Hey mate, how much you asking for the vn?
18k it’s on marketplace