I am so thankful for this video! You have solved my problem. I probably could have built something, eventually, but I am now way ahead. I have a smaller tractor. OK, its a riding mower, minus the deck, that I use for all kinds of things. I will be using your ideas, quick disconnect and all. Every thing will be scaled down, but it will still beat shoveling by hand into my trailer! SUPER JOB!!!! I am so excited, I can hardly contain myself. Now that I have the vision, I will make it come to pass. I always do.
Add 2 upper arms between the attachment side C-channel and the uprights bolted to the frame Now you have a 4 link suspension for forklifts. Will raise any load perfect level and don't need the second winch. Just won't have any tilt ability.
Mount the forks with a hinge. Weld a bar between the two hinges with a vertical arm. Attach the second winch to the top of the arm. Now you have a tilting fork lift.
I would think about moving the lower winch up to either the front part of that tractor frame or to those pieces of C channel that you have going vertical from the frame. It would make the pull angle better. Also it wouldn't need the power cables to move b/c then it would be stationary.
Yeah I’m not sure if I’m going to leave it there, I originally was going to put it underneath and all the way at the back of the loader frame, I’m going to use it like this for a little while and see what it needs, I’m sure there will be other things that I’ll need to change as well
I just want that beautiful orange tractor!! I love early kubotas. To me they just had such awesome styling and lines, they were just cool tractors. I love new Kubotas too of course. Anything orange is always better than those puke green machines! Orange Tractor Pride!!!
That was my second kubota and I did like them both quite a bit, I did sell that tractor though, I found a good deal on a bigger tractor with a loader and couldn’t pass it up
Love what you have done I’m disabled and need something like that great job
@@avxrytoxic6814 thank you! It was helpful for sure!
I am so thankful for this video! You have solved my problem. I probably could have built something, eventually, but I am now way ahead. I have a smaller tractor. OK, its a riding mower, minus the deck, that I use for all kinds of things. I will be using your ideas, quick disconnect and all. Every thing will be scaled down, but it will still beat shoveling by hand into my trailer! SUPER JOB!!!! I am so excited, I can hardly contain myself. Now that I have the vision, I will make it come to pass. I always do.
Can’t wait to see it!
Add 2 upper arms between the attachment side C-channel and the uprights bolted to the frame Now you have a 4 link suspension for forklifts. Will raise any load perfect level and don't need the second winch. Just won't have any tilt ability.
Mount the forks with a hinge. Weld a bar between the two hinges with a vertical arm. Attach the second winch to the top of the arm. Now you have a tilting fork lift.
@@cgiesbrecht great ideas!
I would think about moving the lower winch up to either the front part of that tractor frame or to those pieces of C channel that you have going vertical from the frame. It would make the pull angle better. Also it wouldn't need the power cables to move b/c then it would be stationary.
Yeah I’m not sure if I’m going to leave it there, I originally was going to put it underneath and all the way at the back of the loader frame, I’m going to use it like this for a little while and see what it needs, I’m sure there will be other things that I’ll need to change as well
Also, did you get your koozie yet?
@@Twistedleafrodshop I did, Thank you.
I just want that beautiful orange tractor!! I love early kubotas. To me they just had such awesome styling and lines, they were just cool tractors. I love new Kubotas too of course. Anything orange is always better than those puke green machines! Orange Tractor Pride!!!
That was my second kubota and I did like them both quite a bit, I did sell that tractor though, I found a good deal on a bigger tractor with a loader and couldn’t pass it up
wow looks great! I need to make one to move wood chips
It doesn't have to be pretty to be functional