Thanks, I have purchased the HFP-30 programmer and a couple of HS-5245MG servos to replace a faulty servo in my Freewing Mig-29. Having now watched all your servo programming videos I feel confident in setting servos up to exactly how I need them. Thanks again.
Glad it helped! Remember, you need to understand where your radio's center and endpoints are for the channels. Keep in mind these programmers can only program to 900-1500-2100µs. (Jeti radios by default center at 1500 and have to have the channels upped to about +/-124% to get up to 2100µs and down to 900µs) Good luck!
Followed your video. All good light comes on DPC-11 , green square lights up . Will not connect. Servo is HSB-9380-TH, never been used. Have reloaded software several times. Windows 10. Any ideas. I see your connections are black wire to bottom. Tried that picture l received was black wire to top.
Have you ever tried to program a Hitec HSB Brushless servo? Did you know how important the "Write All" button is?
Thanks, I have purchased the HFP-30 programmer and a couple of HS-5245MG servos to replace a faulty servo in my Freewing Mig-29. Having now watched all your servo programming videos I feel confident in setting servos up to exactly how I need them. Thanks again.
Glad it helped! Remember, you need to understand where your radio's center and endpoints are for the channels. Keep in mind these programmers can only program to 900-1500-2100µs. (Jeti radios by default center at 1500 and have to have the channels upped to about +/-124% to get up to 2100µs and down to 900µs) Good luck!
Followed your video. All good light comes on DPC-11 , green square lights up . Will not connect. Servo is HSB-9380-TH, never been used. Have reloaded software several times. Windows 10. Any ideas. I see your connections are black wire to bottom. Tried that picture l received was black wire to top.
Is it valid for multiplex rhino digi 4?
THX
Unfortunately, I don't think the DPC-11 will work with a digi 4.