Ingersoll Scroll compressor UP6 30 coolant manifold thermostat valve removal, unit turning off

Make sure to relieve all pressure and still some coolant oil will come out. I just wanted to show people what it looks like to remove this item. 12mm allen wrench required. It took a 2 foot cheater pipe to untighten it.
The unit would turn off (due to over heating). The manifold wasn't letting fluid flow out to the radiator and back. Turns out the thermostat wasn't working. You could feel both fluid lines and they would have not much difference in temp. Under normal conditions, one would be too hot to touch, and the other would be almost room temp. The thermostat "pin" is supposed to extend out, when hot, and allow flow. We ordered the new part. But we made a spacer to hold it out, and allow flow all the time for now.

[@kompresorairteknologi]

Nice sharing Video

[@mnairengineering1985]

Good job

[@MrRajivkumarsingh]

Pls post the video where u have put a spacer to make fluid all the time flow through cooler till new spares recieved

[@kyle_in_tex8422]

Sorry, but I don't have that video. We put a washer that fit into the line. If you don't clean out radiator and make sure of coolant's temp delta, you will have trouble. Hot coolant line will be too hot to touch and cool line will be about 40C. Also, if unit is exposed to freezing temps without thermostat, you will have trouble. Thank you.

[@Something-cw6ev]

You mean bypass thermal valve?

[@williamtibaquira2797]

amigo buenos dias, tengo un problema de temperatura alta en un compresor Kaeser 250cfm, parece que no esta refrigerando bien el compresor, puede ser que el aceite no este haciendo su recorrido como debe ser por el radiador, pero no se como funciona esta valvula termostato. no encuentro información mas precisa

[@MadaraUCHIHA-hy9xe]

Hi there, tow day ago we did fix a similar problem who did take a long time to solve, so it seem the thermostatique vile malfunction, we did temoporary fix it by bypassing it untile the spare arrive, you could check the valve by putin it in cold then in hot water or oil, there is a good chance it is the problem,if you did check the filters of oil and air, also the oil level.

[@MadaraUCHIHA-hy9xe]

If you could reply to me the result you go,

[@MadaraUCHIHA-hy9xe]

Look for this video in youtube: How to bypass the thermostat valve?? (for screw air compressor)

[@PankajKumar-ko6iv]

Compressor air outlet se oil bahar Q ataa hai?

[@usamakhanusamakhan6158]

Hi i work in Atlas copco compressor

[@MadaraUCHIHA-hy9xe]

What did you find ?