Phantom 3 Pro Gimble Board Flash No Video Feed Fix
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Link Updated 4/7/2024.
Links to the Zip files keep dropping and popping up. As of now the following works: www.dropbox.co...
The PDF is in the zipped filed. You want to download the ph3pns.zip file.
If you don't have a DB account, select the "Or continue with download only" after selecting the popup download button on the file name.
thanks for the video ( 1 year later ) i sucessfully flashed my board following your instructions . Cheers 👌👌
You just save my day... and my P3PRO ! It did the trick, I owe you one.
I hope I don't have to embark on open gimbal surgery, but if I do this guide will be very helpful. Thank you sir. I just added this video clip to my archive of conventional wisdom.
Love the video and this is the problem with my gimble board. So I hope I can do it. You mentioned the zip files I will need that you was going to post. Where can i find the files and directions for that?
Thanks,
Jimmy
Thanks for sharing your knowledge!
I believe I have this problem with mine I let it sit for over a year and when I went to go use it there was no video feed where would I find the software to reflash mine? I know this is a Old Post but I'm still trying to still fly my Phantom 3 professional
Hello, The link in the description for the firmware files is still good.
@@uavscientific thank you
Thank you for this excellent information. I am struggling with the two small pads boot 0 and boot 1 i initially had them soldered and noticed some extra tin attaching from the wire to the component below. When i went to clean it up the wire came up and now i cannot for the life of me get any solder to those pads. I am curious if the pads came off while attempting to clean. Do you have any recommendations as to how to remedy this problem?
Mi cámara no da señal de video, esta sería la manera de Repara ese error? Gracias
??
In my case when flashing it gets stuck on the target. Please help me.
Can I get rid of the lack of image error on my DJI Go with this procedure?
My PH 3 records but doesn't show live video on DJI GO
ph3pns does not contain files. Could you reload them?
The following is a forum I found with the zip file and pdf mentioned. phantompilots.com/threads/no-image-transmission-signal-p3p.116019/page-3
Hi, thanks for the video , super like you ! I have DJI - Phantom 2 Vision the same problem , images are not transmitted to the phone , on DJI - Phantom 2 , too , as well as on video , do I need to do firmware ? That 's the reason , right ?
Hello, Sorry for my slow reply. The PH2 has the same issue with the WiFi module that your cell phone binds to. I hope to make a video soon to flash the module.
hello my friend from indonesia i tried to follow the method you taught in the video, but when i try to connect the ttl to computer, my dji device doesn't read. please help my friend, thank you.
does this work on a phantom 3 advanced?
The zip file shows empty as of 9/10/2022 for me . I still need these files. I think I downloaded them last year . will comment back if I find them
Hello, Sorry for the slow reply. The link is good again. Click on the "Download All" and it will make the .zip file for you.
This linked file wouldn't open, but found one on Github, search there today is 1/6/2024
Love the video and this is the problem with my gimble board. So I hope I can do it. You mentioned the zip files I will need that you was going to post. Where can i find the files and directions for that?
Thanks
Jimmy
Hello, I would like to ask you about the possibility of connecting an ordinary av camera to the phantom 3 pro video transmitter
Hello, I am sorry, but the camera video feed is digitized right after the sensor. It would be a challenge to find the av feed before it goes into the chip.
TKS, i would like take this file in PDF. How I can do it.. please
Can you tell me where to get this PDF?
Links to the files keep dropping and popping up. As of now the following works:drive.google.com/drive/folders/0ByK3FyyZ9MnTNGQ0Y29ObU43STA?resourcekey=0-Z9UUddA8tKzkOFaZAMevWQ
The PDF is in the zipped filed. You want to download the ph3pns.zip file.
HI and good day, thanks for your video, but zip file have folder empty.
THANKS
Hello thank you for the good post👍👍 could you please help me to get the files for my phantom 3 standard
Hi, I saw yr video and u mentioned flashing P2V+ gimble board..can you share zip file and how to flash it. Thks
Hello, Sorry for my slow reply. The PH2 has the same issue with the WiFi module that your cell phone binds to. I hope to make a video soon to flash the module.
Do you still have the board you flashed if so I will buy it from you
i have a dji phantom 3 standard the cam wont move and most of the part have been replace and still doing the same any solution?
Sorry, but this fix is only for the Phantom 3 Professional. It won't work on the Advanced or Standard models. It fixes the no video issue, it won't fix gimble movement problems. My guess is that your ribbon cable is torn.
@@uavscientific ok thank you
Thanks for the video, however, the file linked is an empty folder.
Hello, Sorry for the slow reply. The link is good again. Click on the "Download All" and it will make the .zip file for you.
Hello, I am sorry, but I could never find files for the P3S model.
hello, unfortunately I can’t use the link to download the program with repair software, please tell me how can I do this?
Hello, Sorry for the slow reply. The link is good again. Click on the "Download All" and it will make the .zip file for you.
When can we get the file
Hi, the zip file is empty. Can you create another zip and share?
Thanks for letting me know. Give me a couple of days, I will get the files put in another location and put up a new link.
@@uavscientific appreciate it much
cara to com esse problema no p3adv ='( ajuda aiii
Sorry, but this fix is only for the Phantom 3 Professional. It won't work on the Advanced or Standard models.
My p3ad block screen but still record og my sd card
how fix this problem sir?
Or where