Whipple SRT8!! Update on the Turborado!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Whipple equipped, cammed srt8 goes on the dyno, plus update on stevens turbo silverado!
Want more race car? Performance automotive is our jam! Subscribe, ring the bell, and stay tuned!
Visit our "Behind the Scenes" channel: / @finishlinevlogs2919
Join us on Instagram: / finishlineindustriesnoco
Follow us on FaceBook: / finishlineindustriesnoco
Check out our services and come join us at the shop! finishlinenoco...
Get financed for a performance vehicle in our inventory! www.finishline...
That thing sounds like a monster 😂
I have a SRT Cherokee that has a D1SC ProCharger. Running lower Boost, nowhere near the power of this Jeep.
Just wondering what Cam he has installed in the Jeep?
Nice build guys!
Merry Christmas....
What's the build list
New sub from Alaska I saw little Miss Brightside give you a shout out, turned out liking your Channel
How he get soo much boost without blowing up the 6.4 ?
Nah the transmission will eventually go I'm running 6lbs of boost on a built 6.4L srt pushing 720whp over 800 to the crank and mine is holding up good but I know it's a matter of time
What is your build list wanting to do the same thing
Fully built motor drop in pistons long tube headers full exhaust cam shaft e85 with a whipple 3.0 but ur looking at low 20's to do it could be cheaper if labor is in one shot
How’s the trans holding up?
Can it be mounted up front ? Mind really care about the “sleeper” turbo. I’m just concern in water since I live in the NE and the turbo lag?
Is this in Colorado? That's where my 700hp srt is and my boys trackhawk let me know we can link up at a meet or something?
any upgrades needed to keep it AWD
Sounds like the Inter Chiller set up is a dud.... What size lines to intercooler and what size reservoir?
Will the stock transmission handle that reliably? Looking forward to supercharging my SRT
Yes it should if he tunes it right and doesn't go over 750 lb ft of torque
Ummmm no, it will not! Trackhawk yes, SRT no!
@STAGEIIGN you're right, I have heard of some tuners detuning the transmission in order for it to be reliable... but I agree with you!!! I left my SRT stock and I will eventually mod my trackhawk because I know it can handle the power
Ya lots of.testing on the srt trans fails around 700
I'm.running.650 with everything else.to the nines till.i can upgrade the Trans and rear end
what kind of cam in there
wat lower springs u have
What cam is this ?
Is this better than a Trackhawk?
15PSI on the engine making 920hp. He can probably turn up the boost if the pistons and rods are forged......it has More hp than a demon of course it's better than a trackhawk(stock) or modded depending on mod for mod. Just do your homework if you choose this platform. Most do a 426 stroker or forge the piston before boosting
@@Momoshiki2379that’s definitely forged or he wouldn’t be making that much power 892hp
@@Momoshiki2379bingo … the only major thing diff in the blocks is that the trackhawk has longer/“stroked” connecting rods - the bore is the same, the gear ratios are nearly the same …to the transmission. So many people just look at a top mounted blower on a 6.2 trackhawk w larger pullies and think ohhh no that thing must be totally different!!
@@invalidusername_5101yea - you’d be surprised what a measly air to air intercooler can do for idle air temps on these things tho - which this obviously doesn’t have w top mounted blower (got a chiller setup ofc)
Sheesh
for christs sake take that thing to the car wash smfh