Watching your video always cheers me up Jason! I know exactly how good finally putting something in years of storage into use feels. Now this video just motivated me to do some projects with my messy garage
Shop looks amazing!! I can relate to the project pause you mentioned, I am just getting back to a home reno after a long pause; feels good to make progress. A couple of thoughts: the power strip: If you are going to use this area for cleaning/liquids consider moving it higher vs. spills or at least have it supplied by a GFIC receptacle. Love the welding plans, gas is totally the way to go. I recommend a night course at a local college and do it soon so you don't later have to unlearn bad habits. Along with that, check you have a suitable fire extinguisher (likely you do) as sparks start flames you don't immediately see wearing a welding helmet, unless it's your shoe.... don't ask. I said a while back you should be at 100k subs, keep at it, you're on your way!!!
Beautiful job on the shop! My shed always looks like a bomb went off in it because Im always doing projects so I never put the tools away 😄 PS- when are you going to unveil the new job deets? Curiosity is killin this cat 😸🎷
I love a good workshop organization project! I had a workshop built in 2020 and have spent the last few years finishing it out. I just finished insulating the entire thing and now need to continue expanding the electrical. After that I have plan to build some large shelving units to take full advantage of my 12' ceilings. A shop is a place to do projects, but it can also be a fun project in itself!
I dont know where to begin... so, in no particular order, let me congratulate you on your new job. The shop looks awesome and looking forward to new videos. Greetings from Quebec 🇨🇦
Welding is a skill that is only learned by doing-so practice, practice, practice! I date everything as well-equipment mounted to the wall, etching new tools, and hidden areas of a building that are not normally seen-so many good reasons to do so. The shop is looking great, can’t wait to see all the future videos shot in there. And thanks for the links to the new job videos-they look great
You’re more than average to me. Great shop refresh! Neat to see your logo up on the wall (and when I look up on my headliner). I am a little jealous of all that you can pack into that space, I’ll have to take some inspiration. -Chris🚙⛰️
The only reason that this exists is because you took the initiative to film it and put it out there, without you I would have never seen this video. Anyway you're the one who controls your success not me or us. Keep up the good work and thanks for the videos.
I love it when people say they have a "small" shop in a 24x24 two car garage. That's 576 sqft of awesome space, i'd love to have. I'm stuck with 120 sqft of shop space, that's about 1/5th the size of Jason's shop.
Yeah I thought about it. Might in the future. First planned on just painting the doors black. Then my wife said to paint the cabinets and leave the doors wood. Then I did neither! 🤣
Watching your video always cheers me up Jason! I know exactly how good finally putting something in years of storage into use feels. Now this video just motivated me to do some projects with my messy garage
Thanks Kai! Yeah it was super long overdue.
"US assembled" cabinets that you have to assemble yourself. Americans are funny sometimes.
Nice! From average guy to average guy, it looks great. Looking forward to more videos. God bless!!!
So proud of you Jason! The shop looks great!
Looking great man! Time to bring my truck over, lol
Yes!
I can never seem to find more than a few straight pieces of 2x4 when i hit the lumber store 😂😢
Dude! Yes! It's ridiculous!
I picked through the pile for quite a long time.
Literally a dream garage for the every day guy. Love it! You put in a lot of work and it shows.
Shop looks amazing!! I can relate to the project pause you mentioned, I am just getting back to a home reno after a long pause; feels good to make progress. A couple of thoughts: the power strip: If you are going to use this area for cleaning/liquids consider moving it higher vs. spills or at least have it supplied by a GFIC receptacle. Love the welding plans, gas is totally the way to go. I recommend a night course at a local college and do it soon so you don't later have to unlearn bad habits. Along with that, check you have a suitable fire extinguisher (likely you do) as sparks start flames you don't immediately see wearing a welding helmet, unless it's your shoe.... don't ask. I said a while back you should be at 100k subs, keep at it, you're on your way!!!
Beautiful job on the shop! My shed always looks like a bomb went off in it because Im always doing projects so I never put the tools away 😄
PS- when are you going to unveil the new job deets? Curiosity is killin this cat 😸🎷
I’ve talked about it on Instagram a few times. But a “collab” video might happen also.
Nice job!!! You knock it out of the park 👍🏻. Love your videos and contents. Greetings from Winnipeg 🇨🇦
You should get a roll of laminate melamine or formica for your workbench top. You can use the weld bond to attach it.
1:39 you should definitely get a router and flush trim bit for this next time. Overall the the progress looks great!
Smashed that LIKE button! 👍
I love a good workshop organization project! I had a workshop built in 2020 and have spent the last few years finishing it out. I just finished insulating the entire thing and now need to continue expanding the electrical. After that I have plan to build some large shelving units to take full advantage of my 12' ceilings. A shop is a place to do projects, but it can also be a fun project in itself!
I dont know where to begin... so, in no particular order, let me congratulate you on your new job. The shop looks awesome and looking forward to new videos. Greetings from Quebec 🇨🇦
Looks awesome! Looking forward to more videos. Come on everyone.... get this channel to 100K!!!!
Welding is a skill that is only learned by doing-so practice, practice, practice! I date everything as well-equipment mounted to the wall, etching new tools, and hidden areas of a building that are not normally seen-so many good reasons to do so. The shop is looking great, can’t wait to see all the future videos shot in there. And thanks for the links to the new job videos-they look great
Jason, I enjoyed this video...GOD will continue to bless you.
Jason, thanks as always for a great video to release some stress watching. You humility and gratitude are always encouraging!
New member to your channel, I like the direction you’re going! Thanks for sharing!
You’re more than average to me. Great shop refresh! Neat to see your logo up on the wall (and when I look up on my headliner). I am a little jealous of all that you can pack into that space, I’ll have to take some inspiration. -Chris🚙⛰️
The only reason that this exists is because you took the initiative to film it and put it out there, without you I would have never seen this video. Anyway you're the one who controls your success not me or us. Keep up the good work and thanks for the videos.
The shop looks awesome! It definitely is motivation and ideas to get my garage better organized.
Great work space man, I'd be motivated to work on anything in there. enjoy
Great job. I enjoy your videos and look forward to more.
Great video!!
Looks great!
I love it when people say they have a "small" shop in a 24x24 two car garage. That's 576 sqft of awesome space, i'd love to have. I'm stuck with 120 sqft of shop space, that's about 1/5th the size of Jason's shop.
That’s for commenting. 🥰
Really hope you get more views. Your channel is great!
Go Griz!!
Subscribed immediately lol
My ADHD has accepted your gift of dopamine. 🤌
🤣🤜🤛
God works in amazing ways! 😀
It would’ve been nice to see the cabinets painted as well.
Yeah I thought about it. Might in the future. First planned on just painting the doors black. Then my wife said to paint the cabinets and leave the doors wood. Then I did neither! 🤣
@@JasonExplainsThings Lol! I personally like the black and yellow motif. Your space is looking great. Looking forward to more of your projects 😊
Brad nail or finish nailer?
15 gauge finish nailer is what I used
Nice work, nice speech, great vid ! I like all of it