Agreed, it's a nice scale body. The springs work quite well. I have done a quick test drive on the rocks and it seems very stable. But the ESC is pretty bad for me. Shame as it has all the LED light addition options. Good luck with yours. 👍
It seems good, maybe a couple of things to improve but even original it is good. I think the dimensions are respected since a real Suzuki is a very small vehicle. Looking forward to seeing the test 😊
@@theminiatureconstructionco4556 I got mine Sunday with a pre-order. So hopefully you'll see it soon. Unless your mate is having too much fun with it. 👍
It might be a good way to build an FJ40/45 with leaf springs. I love these little Suzuki in real life - and I'm prepared to come to love their 1:10 counterparts too!
Hello Del. Yes the leaf spring setup is good. I haven't looked at it in too much detail yet. But it seems more flexible than the previous WPL setups. I'm looking forward to doing something with this Suzuki.😁
@@RC3DPrintAdventure I think of these little things as 1:10 scale as they're very small in real life. We got a puncture in one once - we had an inflated spare tyre and a wheel brace but no jack. Having removed the wheel nuts, between me and another man, plus my wife, we simply lifted up one side and my wife and I held it balanced at around 45° while the owner quickly whipped the wheel off the studs, slipped the new one in and twiddled a couple of nuts on. Then the three of us lowered it diwn - well, we dropped it the last foot ir two. And if one gets stuck, half a dozen people can often manhandle it out of trouble. But, with a C34 body, I reckon it would be a 1:12, rather than 1:10, scale Land Cruiser because they're quite a bit bigger.
@@Del350K4 Great Jimny tale. I do like them. I've always liked them, but couldn't live with the low top speed. just need to move to somewhere really remote to justify one. Yes, I reckon it could make a very good FJ40 1:12. the leaf springs do seem good. Slightly different body mounting to the C34 though. But I'm sure it's possible..😁
@@RC3DPrintAdventure Yes, my wife now has a Daihatsu Feroza. It has a 16V 1.6 litre petrol engine and independent torsion-bar front suspension, with a Jimny-esque leaf spring setup at the back. The front and rear halves of the roof can be removed independently of each other, so it can carry things that it couldn't carry with the roof on. It's at the right point between hardcore off road capability and on-road practicality for her.
Nice Video Bro 😍
Thank you. Very glad you liked it. 👍
Thks Jimny Rocks ❤
Thank for the share os a Awesome Unboxing and Testing!!!
🐼👍🏻🏆
Thank you for watching and commenting..! 👍
You are Welcome my Friend 🐼🐻❄️👍🏻
Thank you for introducing me to a great car! It's a great video.~~~^_^😅😊😅
Thank you for your great comments..! 👍
Nice unboxing
Thank you 🤗
Nice 👍 looks good but needs a fair bit of work mine arrived also 😊
Agreed, it's a nice scale body. The springs work quite well. I have done a quick test drive on the rocks and it seems very stable. But the ESC is pretty bad for me. Shame as it has all the LED light addition options. Good luck with yours. 👍
It seems good, maybe a couple of things to improve but even original it is good. I think the dimensions are respected since a real Suzuki is a very small vehicle. Looking forward to seeing the test 😊
It is a good detailed RC. Yes, somethings could be better. Suspension is good for leaf springs. Thanks for watching and commenting. 😁
@@RC3DPrintAdventure 😉👍
What is that little square on the top of the jimny at 3:04
I'm not sure. I haven't had a good look from the inside yet. I hope it's a removable section for an accessory. But I don't know what that would be.
A mate of mine has one coming. Fingers crossed, I'll get to review it! 🙏
Good job. I did a bit of a rush job on the unboxing. I'll be interested to see what you think. 👍
@@RC3DPrintAdventure I am looking forward to seeing it I the flesh.
@@theminiatureconstructionco4556 I got mine Sunday with a pre-order. So hopefully you'll see it soon. Unless your mate is having too much fun with it. 👍
🔥🔥🔥
Thanks for watching and commenting. 👍
It might be a good way to build an FJ40/45 with leaf springs.
I love these little Suzuki in real life - and I'm prepared to come to love their 1:10 counterparts too!
Hello Del. Yes the leaf spring setup is good. I haven't looked at it in too much detail yet. But it seems more flexible than the previous WPL setups. I'm looking forward to doing something with this Suzuki.😁
@@RC3DPrintAdventure I think of these little things as 1:10 scale as they're very small in real life. We got a puncture in one once - we had an inflated spare tyre and a wheel brace but no jack. Having removed the wheel nuts, between me and another man, plus my wife, we simply lifted up one side and my wife and I held it balanced at around 45° while the owner quickly whipped the wheel off the studs, slipped the new one in and twiddled a couple of nuts on. Then the three of us lowered it diwn - well, we dropped it the last foot ir two.
And if one gets stuck, half a dozen people can often manhandle it out of trouble.
But, with a C34 body, I reckon it would be a 1:12, rather than 1:10, scale Land Cruiser because they're quite a bit bigger.
@@Del350K4 Great Jimny tale. I do like them. I've always liked them, but couldn't live with the low top speed. just need to move to somewhere really remote to justify one.
Yes, I reckon it could make a very good FJ40 1:12. the leaf springs do seem good. Slightly different body mounting to the C34 though. But I'm sure it's possible..😁
@@RC3DPrintAdventure Yes, my wife now has a Daihatsu Feroza. It has a 16V 1.6 litre petrol engine and independent torsion-bar front suspension, with a Jimny-esque leaf spring setup at the back. The front and rear halves of the roof can be removed independently of each other, so it can carry things that it couldn't carry with the roof on.
It's at the right point between hardcore off road capability and on-road practicality for her.