2 inch spindle drop on 05 Chevy Silverado

[@alvaroolivo5227]

You can grind the ball joint bolt and put a smaller nut so you can ride with 17’s and 20’s with ease

[@shreqboi1]

Yes sir, that’s what we ended up doing

[@JorgeCoss-l1s]

Did it make a difference on the drop ? How low did it go ? Thinking of doing this to mine cause mine is pretty much squating on 22s lol

[@davidtorres3985]

What drop spindles are those ? Link ?

[@chatobalencian1504]

Thanks for the vid also what headlight bulbs and bulbs are in this truck it is real clean looking I need a set for my Silverado as well thanks 👍

[@shreqboi1]

Led all around bro! Thanks for the support 🙏🏽🙏🏽

[@chatobalencian1504]

​@@shreqboi1thanks do you know what # they are color # and brand of l.e.d.s I found a set I'm interested in on Amazon 3 colors in 1 bulb by turning lights on and off to get a 6k 10k 12k I'm looking for a good brand l.e.d. set not just a light for a week or so or flickering cheap bulbs

[@shreqboi1]

@@chatobalencian1504 I’ll get back to you later today

[@aaronzavala4336]

Hope you or someone in the comments answer my question do 2006 spindles fit my 08 I already ordered and I’m stressing about them not fitting

[@shreqboi1]

Sorry for the late response, I’m not sure since they do change. Were you able to find out? I googled both years and spindles and the part numbers are different

[@aaronzavala4336]

@@shreqboi1 yeah the tie rod ends are to small the 07 and up a bit bigger

[@shreqboi1]

@@aaronzavala4336 thanks for the info

[@LuisCruz10r80]

Can this be done with basic tools or do you need special tools

[@shreqboi1]

You can do it with a basic ratchet and socket set and some wrenches. Along with a hammer and a pry bar

[@hugorodriguez6366]

Was the rear also dropped? If it was what drop it had on the rear?

[@shreqboi1]

The rear got a flip kit. When it came to me it had a 3/5 drop. I went ahead and added the lowering spindles up front to even it out more because the nose sat higher

[@2twinskicks158]

@@shreqboi1hey bro I have a quick question so I know it was a 3/5 when it came to you so now that you added the spindles how low is it sitting at the front ? Is it now 5 inches dropped at the front ?

[@michaelmontoya7880]

So i grinded the bolt down and i put the wheel on and it still wont clear like if the nut is too big im on 17s

[@shreqboi1]

I had to grind about an 1/8” off the bolt as well, drilled a small hole through it and added a cotter pin.

[@cesarrivera6338]

Would I have to replace the ball joints on 20’s

[@shreqboi1]

With 20’s it will clear just fine

[@osbaldoayala3128]

How about with some 24s bro you think it will clear?

[@osbaldoayala3128]

Or do i need to replace ball joints

[@shreqboi1]

It will definitely clear bro. We have his truck on 22s now and it clears no problems. Even if we wouldn’t have shaved the nut on the ball joint.

[@zaredguerra6704]

You need bigger rims that's the same issue I was having I just went with some 22's. anything under that will have a possibility of rubbing or hitting that ball joint bolt

[@shreqboi1]

I agree. My boy ended up picking up some 22s. Looks way better!
th-cam.com/video/bkZ-GyA8X5c/w-d-xo.html

[@emd2292]

What do you have to do to clear some 17s

[@shreqboi1]

If they don’t clear just shave off the ball joint bolt, it sticks out quite a bit and usually will tear up the inside of your wheel barrel

[@baylivin403]

Would it affect it later on since he’s running with stock springs ?

[@shreqboi1]

He’s been running like that for a few months now no problem. I’ll make an update video soon

[@Lol-oe2sx]

He needs to throw a turbo on it

[@shreqboi1]

I like the way you think pa

[@3_Pack_Cortez]

Si quema cuh

[@shreqboi1]

Yes sir!! Next video might be me swinging it 😈😈