when you like it, then you can drag out the Planes and Level windows into an seperate window on the right side of your Monitor. Then you have them always in sight. :) Why you don't use your 3D Mous, whay better for the kamera rotation, or?
I am a avid follower of your videos and It is my opinion that you are making a rear contribution to the education of the creative communities which I belong to. I would be grateful if you can suggest the likely clamping force for an injection mould of volume 750483537mm^3 and Thickness of 732mm Thanks for your suggestion
Hi, how did you put on windows 11 ??? I can't get it on Windows 11 Please make a video on installing mastercam 2024, I'm from Russia, I can't get this module, thanks in advance ✊👌👌✌
I like to mate everything together in solidworks, then import the assembly. if you setup the assembly in solidworks right, everything is lined up properly with the gcs in mastercam. I know that not everybody has access to solidworks. its just that the modeling and locating in mastercam is SO TRASH.
i appreciatre real time machine cutting after tool path generate, its real practial lession for beginners
Fun stuff.
The rough and finish options just divide your cut into steps between the top of stock and the depth of cut in the linking options.
when you like it, then you can drag out the Planes and Level windows into an seperate window on the right side of your Monitor. Then you have them always in sight. :)
Why you don't use your 3D Mous, whay better for the kamera rotation, or?
I am a avid follower of your videos and It is my opinion that you are making a rear contribution to the education of the creative communities which I belong to. I would be grateful if you can suggest the likely clamping force for an injection mould of volume 750483537mm^3 and Thickness of 732mm Thanks for your suggestion
@@davanchike9326 3-4 tons per square inch of the parting line area. Your mold acts like a piston where the molten plastic is the pressure fluid
awesome
You needed to select either the end points or the mid point of the line you were trying to select.
Awesome
hit me up if you need some input. Been programming with mastercam since version x2!!!
I always make my own planes..as a MC expert what do you recommend doing?
You should start making videos brother!!! Many people would subscribe and watch!!
was there full five axis back then ?
Is the Work Holder 6000000 an homage to the "hee-drawlic" press channel?? And here vee go...
Yes, I get much inspiration from that guy!
@@DragonflyEngineering His videos are great - if a bit off the wall sometimes. :)
Hi, how did you put on windows 11 ??? I can't get it on Windows 11 Please make a video on installing mastercam 2024, I'm from Russia, I can't get this module, thanks in advance ✊👌👌✌
I like to mate everything together in solidworks, then import the assembly. if you setup the assembly in solidworks right, everything is lined up properly with the gcs in mastercam. I know that not everybody has access to solidworks. its just that the modeling and locating in mastercam is SO TRASH.
True, I do the same some editing features like locating the holes and some other stuff is the only good thing in mastercam
I started to get someone from fiver they have solidworks , mastercam is a lil tedious
You probably know this but TITANS of CNC MACHINING has free master cam training.
Yes, he is a great resource. Thanks for watching!
It’s the worst resource. Do not do anything that guy spews
@@ZeroFG2 he learned CNC in prison lol