It’s a great video on how to clean and maintain you powermatic 2,but I haven’t clean mines since I order it back in 2014 that’s 8 years ago and still does the job great. But great video man my kudos to you.
this helped me a lot with reassembling it. Had to do it a couple of times before everything was really clean and sliding with just a little bit resistance, instead of moving badly (injector).
@@mugivermusclemachines5744 shouldn't you use tobacco from packs for this? I don't get good cigarettes should you only buy tobacco pots? parcels do stick that tobacco...
Injector failure fix: If motor is running but injector wont come out, you have to remove the motor, then there is the metal thing with a (==) hole inside and a little round hole. The little round hole has to be fit on the gold color looking bolt spot in the middle at the side. Then the motor has a little push out as well, that will lock the lever with the injector to the motor, but make sure the little hole is connected to the little bar on the motor plating and the other motor part that rotates is in the hole. Then check if you can manually push the injector if not. Continue reassembling and test
Couldn't figure out what was wrong with our machine so I just broke the whole thing down, cleaned parts as I went along, put it all back together, and now it works fine 🤷
mine has counter bought used for 40 and ive rolled 2000 cigs on it without doin anything to it. Use the right cut tobacco pick out the stems and throw the damn dust away
I dont have a problem with jamming my CONSTANT problem (brought brand new two months ago) is that injector will NOT inject to the end of the case….have sent back once got it back and did exactly the same thing
HELPPPPPP I turned it on after cleaning. And pulled silver arm to see if it was better. And it is NONSTOP going in and out (the part that puts tobacco inside tube.) HELPPPP bc now im pissed off and want a cigarette 😂😭
On our third machine, just suddenly no power, item is only 3 months old... Same happened to last one... Very frustrated.. Any suggestions what part we need? Really surprised company site doesn't include more maintenance tips :(
Mine did the same, it just stopped powering up, I'm guessing it's because it's cheaply Chinese made. Top-o-matic last forever, rolls a better cigarette especial 100's, it's a bit faster, but requires a lot more effort.
hi I have problem with motherboard from this machine. Basically one component it is damaged, so I tried it replace but I dont know what it is this element. Can you sent to me picture this motherboard with zoom, or tell me name this chip?? I mean litle chip with 8 pins. Thank you
I've seen these last up to six years doing what you are showing in these videos. Thanks for your help. Just bought one today
Thanks for watching and commenting!
It’s a great video on how to clean and maintain you powermatic 2,but I haven’t clean mines since I order it back in 2014 that’s 8 years ago and still does the job great.
But great video man my kudos to you.
Thanks for taking the time to make this video. It helped me do some much need preventive maintenance.
Thanks for watching and commenting!!
Thanks. I would have never been able to reassemble without yr help
I’m on my fourth machine, don’t know why I never considered this before! Thanks for the very helpful video!
Thank You - thought I was going to have to throw mine away - but took it apart according to your videos and cleaned and lubricated and all is well.
i just bought a powermatc 2 plus..these series will help me
this helped me a lot with reassembling it. Had to do it a couple of times before everything was really clean and sliding with just a little bit resistance, instead of moving badly (injector).
Thanks for watching!
@@mugivermusclemachines5744 shouldn't you use tobacco from packs for this? I don't get good cigarettes
should you only buy tobacco pots? parcels do stick that tobacco...
Injector failure fix:
If motor is running but injector wont come out, you have to remove the motor, then there is the metal thing with a (==) hole inside and a little round hole. The little round hole has to be fit on the gold color looking bolt spot in the middle at the side.
Then the motor has a little push out as well, that will lock the lever with the injector to the motor, but make sure the little hole is connected to the little bar on the motor plating and the other motor part that rotates is in the hole. Then check if you can manually push the injector if not. Continue reassembling and test
Couldn't figure out what was wrong with our machine so I just broke the whole thing down, cleaned parts as I went along, put it all back together, and now it works fine 🤷
Thank you mate! now mine ist like new
I've always wondered what the empty plug is used for, testing maybe?
I clean mine out with the tools every single time,
do you happen to know what will stop the feeder from working and what the side access is for on the powermatic II
mine has counter bought used for 40 and ive rolled 2000 cigs on it without doin anything to it. Use the right cut tobacco pick out the stems and throw the damn dust away
Mine blowed yesterday because i didnt the maintain somebady know where i can buy the full motherboard?
I dont have a problem with jamming my CONSTANT problem (brought brand new two months ago) is that injector will NOT inject to the end of the case….have sent back once got it back and did exactly the same thing
It’s important to pack the ends FIRST, then the middle. Do this, and you’ll have great results (assuming your tobacco isn’t too dry or moist).
How do you take off the cleaning compartment on poweroll 2
HELPPPPPP
I turned it on after cleaning. And pulled silver arm to see if it was better. And it is NONSTOP going in and out (the part that puts tobacco inside tube.) HELPPPP bc now im pissed off and want a cigarette 😂😭
Sounds like you plugged the 2 smaller plugs in opposite of how they were supposed to be.
😅😂😅oops hope you got it fixed
Do you happen to know the specifications of the motor inside? rpm, volts etc...? thanks for the video btw
No, sorry
I am on my second one in a few months. My issue is it worked fine I tried to roll today and i get a slight "click" and the red light.
That is exactly what my four month old machine is doing
On our third machine, just suddenly no power, item is only 3 months old... Same happened to last one... Very frustrated..
Any suggestions what part we need?
Really surprised company site doesn't include more maintenance tips :(
Mine did the same, it just stopped powering up, I'm guessing it's because it's cheaply Chinese made. Top-o-matic last forever, rolls a better cigarette especial 100's, it's a bit faster, but requires a lot more effort.
Power cord simple fix
Taking case off is it Phillips or flat screwdriver?
Phillips
The pusher piece wont come out for me when I push the lever down can you help me I cant roll cigs
Something must have came apart inside??? Good luck!
Thanks for watching and commenting!!
hi
I have problem with motherboard from this machine. Basically one component it is damaged, so I tried it replace but I dont know what it is this element. Can you sent to me picture this motherboard with zoom, or tell me name this chip??
I mean litle chip with 8 pins. Thank you
Have you tried doing a Google search? I would think you should be able to find it there?
@@mugivermusclemachines5744 yes. I have nothing. I try motherboard number.
Do you know how to fix if everything else is working but the injector is not sliding out
No, sorry
Did you ever find out why...
@@mugivermusclemachines5744
Did you take the sticker off or did yours not come with one. Mine has a metal like sticker where the tobacco goes
Did all your machines break? I see a pack a Marlboro black 100s lol
I fill the Marlboro 100 package with my own cigarettes I have a friend at work that I get the empty packs from. Thanks for watching!
Mugiver Muscle Machines Just being a smart ass buddy. Thanks for the videos!✌
Mugiver Muscle Machines I make custom pecan or cedar wood packs. Let me know if you want to review and keep one .
That guy
Yeah I would be totally interested in it, I think the cedar one would be awesome!
+That guy
Sounds good I'd love to try one and review it!
Powermate 2+
Don’t use tobacco dust lol
Do you happen to know the specifications of the motor inside? rpm, volts etc...? thanks for the video btw
CDino86 .
Sorry, I don't know what the specifications on it. Maybe you could do a Google search and find that information? Thanks for watching!