Drawing Terrence Howard's LynchPin with Sacred Geometry in the Golden Seed of Life
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- FREE COURSE LINK Draw the LynchPin with Sacred Geometry!
www.knewgeometrycourses.com/c...
In this video I draw Terrence Howard's Lynchpin by hand using a compass and straight edge in the Golden Seed of Life. This version of the drawing is very similar Howard's Lynchpin with very minor adjustments that allow the form to incorporate the golden ratio and make it easy to draw with traditional techniques as show. In addition I also draw the form I created form studying the LynchPin that I called the Maple Leaf. All the information about these forms can be found on my previous 3 videos on the topic which are linked below. In this video I celebrate the creation of the form by drawing it with Sacred Geometry, which you can do too! If you'd like to do the drawing and are just getting started with drawing or find this video difficult to follow at times check out Knew Geometry Courses which is offering a FREE tutorial on how to draw it done digitally so all can be see clearly and replicated easily. Hope you check it out.
Enjoy!
FREE COURSE LINK Draw the LynchPin with Sacred Geometry!
www.knewgeometrycourses.com/c...
Knew Geometry Courses
www.knewgeometrycourses.com
1-1 Mentoring
knewgeometry.space/1-on-1-men...
Knew Geometry on Patreon / knewgeometry
Knew Geometers Facebook Group
/ knewgeometers
Nice ❤
Another ironic thing about Terrance Howard's rejection of the candidate who submitted a drone to a competition based on Howard's LynchPin design, with software or 'firmware' written by the candidate and publicly released with an Open Source/Free Software licence, is the Computer Aided Design or CAD Tool which Horward uses in his videos to sell his ideas. The CAD Tool Howard's staff used in the competition video to demonstrate the feasibility of his drone LynchPin design, and the one they used in the video showing how his new physics model could be used to form planets like Saturn and galaxies like the Milky way, that tool is BLENDER. Blender comes with an Open Source/Free Software licence. Blender has a particle simulator which you can use to simulate the physics of particles being acted on by vortices. Howard uses this to simulate the particles motion around the blades of the drones. And because of Blender having an Open Source/Free Software licence and they could get it for free, Horward and his staff was able to take advantage of other people's generosity and test their ideas. Now having used it to test their ideas and demonstrare them to the public they start moaning about one of the candidates in their competition used an Open Source/Free Software licence to create the software for a drone and released it to the public. And they proceed to say, to paraphrase, he eliminated himself because he released his software to the public with an Open Source/Free software licence? You take advantage of other people's generous contribution to the public but penalise someone for likewise sharing his results with the public? Now you have benefited from other people's generosity you are going to be mean and selfish with the results? Is it that candidate who has eliminated himself? or is it Howard and his staff who have eliminated themselves?
I agree with your reservation about his patenting of some of his ideas.
Just saw the video of the contest he organised for people to create a flying drone based on his LynchPin design.
th-cam.com/video/LGPOkZxf5F4/w-d-xo.html
In that video, he said, to paraphrase, one of the contestants effectively disqualified himself because he released the software he used to make the drone, to the public, with an Open Source Software licence. Neither Howard nor any of his fellow judges seemed to understand the nature of Open Source and Free Software Software Licences. Nor the benefits of having free and open exchange of ideas. His whole LynchPin design comes from the flower of life which he says has been around for 6000 years. And been handed down from generation to generation. He would not have come up with that LynchPin design if it were not for an open exchange of ideas.
He just went with his gut feelings and proceeded to dismiss that contestant. Even though he admitted that that contestant was the first one who came out with a feasible working design. And by doing so and making it publicly available he encouraged others including the other contestants to submit their designs.
Your guest was just on Jain108 academy
Great, I’m happy for Michael that his work gets more exposure.
A revelation from God showed how you could create chain of curved tetrahedrons
along the edges of the pentagons used to make the LynchPin. This came from
looking at the flower of leaves growning out of the top of a pineapple this
morning.
Basically, you can create a set of small equally sized curved tetrahedrons and
line them up on a table. Then beginning from one end of the line, to the
opposite end, pick up the first two tetrahedrons, and make a hole at the base
of second tetrahedron, from the base to the midway point in that tetrahedron.
By piercing it with the tip of the first tetrahedron. Move onto the next two
tetrahedrons along the line, and repeat the same thing. And so on and so on.
until you reach the end of the line.
Then go back to the beginning of the line, from one end of the line, to the
opposite end again, stack the tetrahedrons one on top of another to form the
edge of a pentagon, using the holes at the base of the tetrahedrons to insert
the next one along on top of the previous one.
The result should hopefully be similar to the flower of leaves growing out of
the top of a pineapple, which was the inspiration. If you look down at
the flower pineapple, from the down at the top of the pineapple, you will see
that the flower of leaves coming out of the top are made up of rings
of leaves which are like the sides of curved tetrahedrons, which are tightly
packed together. The difference between this natural stack of tetrahedrons
and the artificial stack just described above is that sizes of the
tetrahedrons of this flower at the top of the pineapple are not the same.
The tetrahedrons closer to the center of the fruit bulb are taller than
the ones further away. The tetrahedrons are also rotated at different angles
around the axis going from center of top of the flower, down to the center
of the fruit.
So the leaves of the tetrahedrons at the next layer up, from the center of
the fruit, do not directly overlap the ones at the next down. But instead
these are slightly rotated around that axis and offset by a few degrees.
You can emulate this rotation and offset too if you want in the
artificial stack of tetrahedrons. To produce a stronger structure.
Having formed one edge of a pentagon using the method described above,
create 4 more such edges of the same size. At one end or front of each edge
will be a single point. And at the opposite end or back should be three
points at the base of a tetrahedron.
Now connect the 5 edges together to form the sides of the pentagon, using a
special tetrahedron at the joints where two edges meet. At each joint, one
vertical side of that joining tetrahedron should be pierced by the single point
or front of one edge. And the opposite vertical side of that same joining
tetrahedron, should be pieced by one of the three tips of the base or back
end of the next edge along. All of the edges of the pentagon should have
the tetrahedrons facing the same way going around the edges. I think.
That is it. Not quite sure how this would work.
It is not clear what the tetrahedrons would be made out of. Whatever the
material, it would have to be soft enough to make it easy to create a hole in
the base of each tetrahedron to insert another tetrahedron into that hole.
And yet the material has to be strong enough. So that when each tetrahedron is
inserted into the base of the next one in the chain, it does not easily come
out or break when you apply force to the connection between the two.
God bless!
😎 ❤✡️
i cant see how you are drawing most of this due to low quality. 360p is the max for this video.
Why did you take that video down with that old man
You took that one video down with that old man because you thought you was going to expose Terrence Howard's
Quit trying to steal Terrence Howard work