We do winter tire summer tire switches at home, we do 300 vehicles per season. With the 3 ton jacks we can change tires on a vehicle in 15 minutes, we have the 5 ton for big half-tons, my floor jacks have not seen the light since getting these 2 years ago, we never had an issue with the airbag jacks. They do use a lot of air but we have a large compressor. I just wish I had bought them sooner.
You are the first person on TH-cam that routed the hose in that manor. Thinking about getting this jack, maybe the 6k one, and I will run the hose the way you did.
Good idea, but I think they need to make a lower profile version that lifts higher. This looks like it's limited pretty much to changing tires. Can't wait for version 2! Like the ride!
i agree i couldn't get it under my chevy but i mean it does sit low definitely would like to see a low profile version and maybe some blocks you can stack for higher vehicles. Thanks for the comment
I'm going to see about adding some nylon runners underneath, or just have some kind of slick surface mat to slide upon as it's pulled in and out for positioning.
Can you take a pressure reading while lifting that heavier than usual load? On my 3 ton, it takes about 40 to 45 psi with a regular car load. With the larger air bladders of the 5 ton, the pressure would be lower than the 3 ton, but the full frame vehicle may compensate.
I've seen them before and thought they were cool. If I didn't have a lift I'd consider getting one of them. I do like the fact that the handle can go flat against the ground, which you can't do with a regular floor jack
The old jack is it a old Napa 3ton I have the same one I bought it in the 97 it came with two 3 ton jack stands in a kit and it stop working yesterday and I am looking for a new one in Amazon and tell you the truth I did not take care of that jack it was left on the weather countless of time holding projects vehicles another thing have you asked or tried to get parts for it is when Napa mede good equipment not like the Chinese stuff they Cary now
I worked at napa for 22 years. they made changes so i left and now I'm a driver at UPS. That being said knowing the company from the inside I highly doubt they sell parts for those jacks. Goodluck finding someone at napa that even would know how to help you. Used to sell quality parts not anymore... very sad
Either these things haven't been around that long yet or it never happens, because I haven't heard of one instance where it spontaneously let go while in use.
@@AllThingsCool I have a daytona low profile and that thing is heavy. Have you seen the aluminum daytona jack? It looks really cool... but that that air jack looks nice and you don't have to wear your self out jacking up cars.😉👍🏼
@@aliciaANDanthonySandoval i would like to get this new Daytona th-cam.com/video/pCrC0eEdpwE/w-d-xo.html but 299 is to much for me. if I do get something it needs to be light and low profile id love to have a hoist !
VEVOR Air Jack: amzn.to/3UjLBP5
Code: 15B08N6FW (15% off code+ 15% off deal)
Total 25% off 👍
Use a couple of 2x10's under the base. An immediate 3" extra to lift pretty much anything off the ground
We do winter tire summer tire switches at home, we do 300 vehicles per season. With the 3 ton jacks we can change tires on a vehicle in 15 minutes, we have the 5 ton for big half-tons, my floor jacks have not seen the light since getting these 2 years ago, we never had an issue with the airbag jacks. They do use a lot of air but we have a large compressor. I just wish I had bought them sooner.
I agree my floor jack hasn't been used since I got the air bag jack either
You are the first person on TH-cam that routed the hose in that manor. Thinking about getting this jack, maybe the 6k one, and I will run the hose the way you did.
Jacks been working good for me ! love it for shop/garage quick light and compact
Thanks for the great video. You are the only one I found that tried the jack with a variety of compressors!
glad i could help !
Good idea, but I think they need to make a lower profile version that lifts higher. This looks like it's limited pretty much to changing tires.
Can't wait for version 2!
Like the ride!
i agree i couldn't get it under my chevy but i mean it does sit low definitely would like to see a low profile version and maybe some blocks you can stack for higher vehicles. Thanks for the comment
I'm going to see about adding some nylon runners underneath, or just have some kind of slick surface mat to slide upon as it's pulled in and out for positioning.
Good idea !
Can you take a pressure reading while lifting that heavier than usual load? On my 3 ton, it takes about 40 to 45 psi with a regular car load.
With the larger air bladders of the 5 ton, the pressure would be lower than the 3 ton, but the full frame vehicle may compensate.
I've seen them before and thought they were cool. If I didn't have a lift I'd consider getting one of them. I do like the fact that the handle can go flat against the ground, which you can't do with a regular floor jack
u got a lift .. jealous
nice vid on the jack got a question for you what did you use on your flooring?
Thanks! What do you mean about the flooring (garage flooring?) if thats what your asking i used a product from
ucoatit.com/
Can you disconnect it from air compressor so that you can still use the air compressor for impact wrench to change tires?
yes
I’m glad them sills are strong
The old jack is it a old Napa 3ton I have the same one I bought it in the 97 it came with two 3 ton jack stands in a kit and it stop working yesterday and I am looking for a new one in Amazon and tell you the truth I did not take care of that jack it was left on the weather countless of time holding projects vehicles another thing have you asked or tried to get parts for it is when Napa mede good equipment not like the Chinese stuff they Cary now
I worked at napa for 22 years. they made changes so i left and now I'm a driver at UPS. That being said knowing the company from the inside I highly doubt they sell parts for those jacks. Goodluck finding someone at napa that even would know how to help you. Used to sell quality parts not anymore... very sad
Nice jack,really nice impala!
Thankyou sir 👍
Any update?
just used it a week ago on a compact car no issues it's my go to jack since I made the video
@@AllThingsCool awesome. That is great to hear. I've been looking to get one and was worried about longevity. Thank you for the reply.
Pop!!!
oh man don't say that lol
Either these things haven't been around that long yet or it never happens, because I haven't heard of one instance where it spontaneously let go while in use.
Nice
I like it for the shop/garage hardly takes up any room,light and quick to use. I have easy access to my air so that makes a big difference
@@AllThingsCool I have a daytona low profile and that thing is heavy. Have you seen the aluminum daytona jack? It looks really cool... but that that air jack looks nice and you don't have to wear your self out jacking up cars.😉👍🏼
@@aliciaANDanthonySandoval i would like to get this new Daytona th-cam.com/video/pCrC0eEdpwE/w-d-xo.html but 299 is to much for me. if I do get something it needs to be light and low profile id love to have a hoist !