Thank you so much ! You are the Best, It's my first time to finish a tuto. I loved it ^^. It's a little bit fast but with your comment it's easier to understand; this is a good idea !
how did you chose 1 single block at 8:27 minute ? Mine selects the whole building, please help.... and thanks a lot, the video was very easy to follow !!
Hi Fatema, 1st Step: just move the Cursor on 1 panel which ever you want; 2nd Step: Press "TAB" button until it highlights the individual panel; 3rd Step: When you see the highlighted panel, just click to Select the individual panel. Good Luck! :)
Hi, thank you for the video! But i have a question - why whenever i change the panel thickness i somehow offcets to the side but it doesnt change the thickness?
Thank you for watching, you have to go back to the family and use the "point" to create thickness so that it will flex on your model when you merge into project.
Hello, I have a quick question :) After I'm done with the Rhomboid family and input it into the Model, the plates if I may call them like that are bigger and do not fit in the form, can you give me some info about that :? Thank you very much :)
Thank you for watching Stoycho Spasov....to answer your question, first your Rhomboid family should match the dimension in your model. Go to properties of your Rhomboid and double check the "U Grid" and "V Grid" dimension to match in your model... good luck! cheerz!
My question is I couldn't create the curved surface as you did at the video @ 4:42 , since the version I am using is 2019, which doesn't has the " create form " command. Do you know which command can be used instead?
Hi there I wonder if I could get some help in an adaptive component spiral stair I need to do according to a point cloud. I need to create a step with a certain thickness for the spiral stair that would be repeated many times as necessary and then if they could rotate in relation to the path they are attached to finish the stairs. Is that possible?Please?
Hello, thankz for watching eliane schmidt., Try to watch first my previous video on Basic Staircase "BIM - Revit Staircase" then after let me know how can I help you...
I tried to do it but I changed the demonsions of the roof ( bigger than yours) , so this type wouldn't apply on the roof, it said that something wrong ( error) how should I solve the problem?
hello, Please help me! What wrong when I click one panel ?It do not let me change the thickness on properties. I only can change the thickness of panel in editting evironment of messing but after finishing nothing change??? And one difference I created my messing roof from messing and site not like your.
Thankz for watching ArchAymanlsmail,. ;) To answer your question, basically add the joint (connection) on your Adaptive Panel. On the example, I only created a simple box panel. Try to watch my previous video on basic Adaptive component, there I showed how to add frame/joint/connection. Hope this will help. good luck! cheerz
Hi, Thanks for this video...., how did u choose the generic model pattern based family...mine don't have the family.so can I choose curtain panel pattern based family instead of that. and also can you send me the Revit file. please !!!
Thankz for watching Salu Saleema,.. ;) message here your email address so that I can send you the revit file. To answer your question, first go to NEW on File Menu - then choose "Family" - Select GENERIC MODEL ADAPTIVE to start your model. cheerz!
Hi Non-Stop Learning101, when I load the Family 2 into project, I got this: Can't make type "Rhomboid : Family2". Can you help me? I'm using Revit 2017. Thanks a lots.
Great work. Non stop your videos. Very useful. You just showing what needed to show in quick manner." Like" from me
Thanks for watching Bakyt, appreciated your comment
Thank you so much ! You are the Best, It's my first time to finish a tuto. I loved it ^^. It's a little bit fast but with your comment it's easier to understand; this is a good idea !
Thank you!
Hi Eugene, the revit file in this video was sent to your email. thank you!
`Thankyou
Can you send it to me too please? domingodenmarynne@gmail.com Thank you in advance :)
Please send me! 10alsalihi@gmail.com
hey can i get the file as well? notweisiang@gmail.com
how did you chose 1 single block at 8:27 minute ? Mine selects the whole building, please help.... and thanks a lot, the video was very easy to follow !!
Hi Fatema, 1st Step: just move the Cursor on 1 panel which ever you want; 2nd Step: Press "TAB" button until it highlights the individual panel; 3rd Step: When you see the highlighted panel, just click to Select the individual panel. Good Luck! :)
omg thanks for the instruction! you are the best thanks !!!
Hi, thank you for the video! But i have a question - why whenever i change the panel thickness i somehow offcets to the side but it doesnt change the thickness?
Thank you for watching, you have to go back to the family and use the "point" to create thickness so that it will flex on your model when you merge into project.
Hello, I have a quick question :) After I'm done with the Rhomboid family and input it into the Model, the plates if I may call them like that are bigger and do not fit in the form, can you give me some info about that :? Thank you very much :)
Thank you for watching Stoycho Spasov....to answer your question, first your Rhomboid family should match the dimension in your model. Go to properties of your Rhomboid and double check the "U Grid" and "V Grid" dimension to match in your model... good luck! cheerz!
My question is I couldn't create the curved surface as you did at the video @ 4:42 , since the version I am using is 2019, which doesn't has the " create form " command. Do you know which command can be used instead?
i dont have the metric template for some reasons.....what can i use instead of that?
You can copy and paste the metric template in your computer
Hi there
I wonder if I could get some help in an adaptive component spiral stair I need to do according to a point cloud.
I need to create a step with a certain thickness for the spiral stair that would be repeated many times as necessary and then if they could rotate in relation to the path they are attached to finish the stairs. Is that possible?Please?
Hello, thankz for watching eliane schmidt., Try to watch first my previous video on Basic Staircase "BIM - Revit Staircase" then after let me know how can I help you...
I tried to do it but I changed the demonsions of the roof ( bigger than yours) , so this type wouldn't apply on the roof, it said that something wrong ( error) how should I solve the problem?
Im not exactly sure what you did, but you can try to do it again and ensure that the reference plane are correct
hello, Please help me! What wrong when I click one panel ?It do not let me change the thickness on properties. I only can change the thickness of panel in editting evironment of messing but after finishing nothing change???
And one difference I created my messing roof from messing and site not like your.
Thankz for watching. try to select the right panel by pressing "tab"
dude awesome work !!! can i ask you what if i want make joint between aluminum tiles ?
Thankz for watching ArchAymanlsmail,. ;) To answer your question, basically add the joint (connection) on your Adaptive Panel. On the example, I only created a simple box panel. Try to watch my previous video on basic Adaptive component, there I showed how to add frame/joint/connection. Hope this will help. good luck! cheerz
thank you arnold :) i will try this one
Hi, everytime i tried to apply the Rhomboid panel I get this message. Can't make type "Rhomboid, Im using RVT 2020. Could you help me please?? Thanks
it is something to do with your family. adaptive points maybe are not matching
When I apply my pattern onto the grid in 3D form, the pieces overlap quite a bit. Is there anyway to make they just fit snug, no overlap?
thankz for watching....try to edit in the properties
Hi I just wanted to know if I can rotate the mass to be vertical after I model it.
it depends, if you used based modeling for your mass, no.
Hi, Thanks for this video...., how did u choose the generic model pattern based family...mine don't have the family.so can I choose curtain panel pattern based family instead of that. and also can you send me the Revit file. please !!!
Thankz for watching Salu Saleema,.. ;) message here your email address so that I can send you the revit file. To answer your question, first go to NEW on File Menu - then choose "Family" - Select GENERIC MODEL ADAPTIVE to start your model. cheerz!
does this have to be made as a conceptual mass can it be made as a family and imported onto a curtain wall?
yes. thankz for watching...
I have a question. Can we do the same process of drawing on the site model itself. Or doest it have any solution for it?
Yes of course
can you add lighting to this form?
Thankz for watching Kazzie K...;) Yes you can add lighting using Face placement lighting componet...cheerz!
WOW that is Great
Thanks for watching Abo
hey!
can you tell me what does "component flip" do?
Thankz for watching Tavishi Agrawal...yes it flips, select the component and go to "Properties" and look for flip...good luck!
Hi Non-Stop Learning101, when I load the Family 2 into project, I got this: Can't make type "Rhomboid : Family2". Can you help me? I'm using Revit 2017. Thanks a lots.
thankz for watching,, try to double check the surface your are clicking
Hi when I elevate the points they disappear. Can you help please?
check your section view, maybe they are outside your view.
Thanx sir for learning but sir plz without voice difficult to understand if u want sir plz record with ur own sound than more good sir thanx
thankz for watching
Please can u share the file
Hi Eugene Born, thank you for watching. Yes, kindly give me your email address please!
eugborn@yahoo.com
Non-Stop Learning101 please send it to me too please please please domingodenmarynne@gmail.com
hey can i get the file as well? notweisiang@gmail.com
3:24
thanks for watching Sheena... ;)
CRAP, NEVER LIKE THIS WITHOUT GUIDENCE
Thank you for watching 😉
Hi~
Please can you share the file
Thanks for watching, email please?
@@NonStopLearning101 me too please benibrahimayaz@gmail.com