I can only imagine the joy, when it starts after a rebuild. If I had to do this it will most probably take 100 takes and then off to someone that knows what they are doing 🙂
It must be nice to assemble your own motor as you know everything is done correctly. I wonder if the heads on these pentastars can be ported & polished for any extra hp/tq .
Nice Job! Did you find the total cost of your rebuild to be less than $5K, the average cost of a reman long block? I want to rebuild mine mostly for the satisfaction of having done it myself but the cost of parts and machine work is adding up to almost the cost of a reman engine. Any tips to save $$? Thanks for sharing!
i did it for around $2000. With all the extra stuff a bought like a new clutch while i had it apart it came to around $3000! not bad...the mechanincs wanted $12,000 with labor!!
nice job , some advice please , what was the reason for the tear down , I have just finished the dreaded rocker replacement , but none were damaged but , I still have metal particals in the oil I am thinking either bigend or mains , any other common failure ?
i had the dreaded blinking engine light...hada mechanic determine it was blow by which turned out to be a broken ring on cylinder 5. there was oil passing the piston and getting everywhere causing the misfire! thanks for watching !
Nice to see the teardown/rebuild of my daily driver. Once my warranty is up, I plan on taking care of all the engine problems myself where I can.
I can only imagine the joy, when it starts after a rebuild. If I had to do this it will most probably take 100 takes and then off to someone that knows what they are doing 🙂
You can do it too!!
Good Job
Nice job!
Thats real impressive.
Got me looking at repairing my blown engine. Lol
Do it !!
Wow beautiful job, greetings from San Diego
It must be nice to assemble your own motor as you know everything is done correctly. I wonder if the heads on these pentastars can be ported & polished for any extra hp/tq .
They do
i had the heads redone by a machine shop. i only assembled!
Thanks for sharing,.... do you have a good manual that showsnyou step by step and torque specs???
i ordered the dealer service manual on usb
www.techauthority.com/dashboard/products
BEAUTIFUL! I definitely need your advice. I’m looking to rebuild my Pentastar V6 from my challenger. Where do I start?
Haha, just open that mf up 😂😂 don’t be shy ☺️
start by watching the video in slow motion?
Nice Job! Did you find the total cost of your rebuild to be less than $5K, the average cost of a reman long block? I want to rebuild mine mostly for the satisfaction of having done it myself but the cost of parts and machine work is adding up to almost the cost of a reman engine. Any tips to save $$? Thanks for sharing!
Hate when TH-camrs ignore the comments don’t do the video if not gonna reply to people.
For what I added up its around $1500 if you do it yourself
@@geistdylanor less
@@fabiancastellanos7196 definitely
i did it for around $2000. With all the extra stuff a bought like a new clutch while i had it apart it came to around $3000! not bad...the mechanincs wanted $12,000 with labor!!
nice job , some advice please , what was the reason for the tear down , I have just finished the dreaded rocker replacement , but none were damaged but , I still have metal particals in the oil I am thinking either bigend or mains , any other common failure ?
i had the dreaded blinking engine light...hada mechanic determine it was blow by which turned out to be a broken ring on cylinder 5. there was oil passing the piston and getting everywhere causing the misfire! thanks for watching !
Is it okay to reuse the rod and crank bolts?
@@leecrumble3921 as long as they are in good shape…yes….just put them in the exact location that you took them out of…
What gen is that 4 ? Of 3.6
i am not sure it came out of a 2017