it isnt to hard just be prepared to pay for some good custom headers and redoing the the steering shaft. seems like alot of people are interested on doing this swap i have all the pics you will need
I need some help!! some info if you will! I have an 87 buick regal with a BBC that i drag race. Its a budget motor, but still built right, lol, if you know what i mean! The question is, its running 12.5:1 compression and i would like to convert to methnanol/ achol, would this compression ratio be enough? Any info would be great, thanks!!!
Listen Harry ... If you have reached that point in time where your about to undertake a motor swap your already no doubt already a bonifide motor head of which everyone of your many issues will be over come . You see youngman A REAL motor head looks at each problem or task with the same intensity and overcomes all of them using all the tools at his disposal ..so for someone to start naming off all the parts your gonna need to make your project yours will in fact be his . it's IN THE DOING.
@kryptoniteracing1 no he did them in his garage Mike Tate is his name lives in Tulsa Oklahoma he would need your truck to do them right, each setup is different and it to tight to build them the same lemon,and stahl make them but they dont fit all that well and they are high
@seasterl it will be fast, the air i ran is was vary bad and converter wasnt build for truck made only 2 passes been sitting since 1.37 60 ft 1/8 6.27 3100 lbs with driver went to alky injection recently might get it out this year if all goes well
@blazinone Mike Tate in Tulsa ok Build them for me and they cost almost 1/2 as much as lemon or stahls and fit alot better its hard to mass produce a header for a bbc in an s10 to many varables
I have an 92 with a sbc installed now. I want to go with a big block. whats involved with that swap? Ive heard all kinds of horror storys, from entire front end replace to steering probs.
Hi! Me again....Question???What size tires are you using on the back???I want to buy this S&W kit....But, want to know if my Weld DragLite 15x15 rims with a 4.75 off set and my tires Mickey Thompson Sportsman S/R Radial 31x18x15 will fit.... Also, did you go with the Ladder Bar kit or 4 Link kit....Please let me know.....Thanks......
@rockyiharold steering problem will be the steering shaft will be it the way of number 5 and 7 exhaust tube have to move it over i used a motor plate and kept stock (Solid) motor mounts
@numskull223 steering is a problem i can send pics to help but i had a sbc with stahl header and my big block fits and looks alot better after some work
Hi! Bad A** S-10....Did you have to cut and move the Fire Wall back for the Big Block to fit in the Engine compartment? I'm thinking about putting one in my 1991 S-10 or My 1985 S-10....Which one would you put it in A 1991 normal cab short box or a 1985 normal cab long box? I'm using a 9" ford rear end with coil over spring and shocks....Let me know???? Thanks!!!!!
The sound of this thing Europeans just dont get. This sounds bad ass, If this were to come up behind me on the street, id pull over. But if a Ferrari 458 shit-talia came up behind be, all I could do is laugh about how pansy it sounds!!
I'm sure it was a nightmare to fit that motor in but its done so cleanly it looks right at home. damn fine job.
Sweet! Sorry to hear about the layoff...
Hope things look up for you!
My dream truck is an S-10 with a blown Hemi 528 under the hood!!!
(all CHROME!!)
it isnt to hard just be prepared to pay for some good custom headers and redoing the the steering shaft. seems like alot of people are interested on doing this swap i have all the pics you will need
@425ponys
weld up holes using patch panels, hammer and bondo
@dookiss4 the short box because the long beds have them 2 jointed drive shafts and they would break easyer
ive got pretty big slick under there and a 4 link Seems to work fine at the track
that engine weighs more than the truck!!
OH MY GOD...
...I just came
I need some help!! some info if you will! I have an 87 buick regal with a BBC that i drag race. Its a budget motor, but still built right, lol, if you know what i mean! The question is, its running 12.5:1 compression and i would like to convert to methnanol/ achol, would this compression ratio be enough? Any info would be great, thanks!!!
Listen Harry ... If you have reached that point in time where your about to undertake a motor swap your already no doubt already a bonifide motor head of which everyone of your many issues will be over come . You see youngman A REAL motor head looks at each problem or task with the same intensity and overcomes all of them using all the tools at his disposal ..so for someone to start naming off all the parts your gonna need to make your project yours will in fact be his . it's IN THE DOING.
thats awesome
me and my dad are thinkin about doin a S10 bbc swap....not sure if its worth it though.
How much frame and firewall work did you do?
@kryptoniteracing1
no he did them in his garage Mike Tate is his name lives in Tulsa Oklahoma he would need your truck to do them right, each setup is different and it to tight to build them the same lemon,and stahl make them but they dont fit all that well and they are high
@seasterl
it will be fast, the air i ran is was vary bad and converter wasnt build for truck made only 2 passes been sitting since 1.37 60 ft 1/8 6.27 3100 lbs with driver went to alky injection recently might get it out this year if all goes well
Awesome truck i am in the process of building a bbc s10
@dookiss4
firewall is in stock location only problem you will have is steering, and headers id recomend getting them custom made
lol at 5 seconds i though he was out of gas already.
@blazinone
Mike Tate in Tulsa ok Build them for me and they cost almost 1/2 as much as lemon or stahls and fit alot better its hard to mass produce a header for a bbc in an s10 to many varables
has anyone see this truck went to Texas like to see it again thx
where did the headers come from
I have an 92 with a sbc installed now. I want to go with a big block. whats involved with that swap? Ive heard all kinds of horror storys, from entire front end replace to steering probs.
Hi! Me again....Question???What size tires are you using on the back???I want to buy this S&W kit....But, want to know if my Weld DragLite 15x15 rims with a 4.75 off set and my tires Mickey Thompson Sportsman S/R Radial 31x18x15 will fit.... Also, did you go with the Ladder Bar kit or 4 Link kit....Please let me know.....Thanks......
a C&S carb you did go all out those things cost a mint.
@rockyiharold
steering problem will be the steering shaft will be it the way of number 5 and 7 exhaust tube have to move it over
i used a motor plate and kept stock (Solid) motor mounts
motor 500 ci big block,gen 4 block.080,moroso kick out pan,moroso billet oil pump,scat 4.250 crank,eagle 250 long rods,srp 13-1 pistons,740 roller Lunati cam,canfeild heads (345 Holley),polished dominator intake,1150 c&s alcohol dominator,csr water pump,
@numskull223
steering is a problem i can send pics to help but i had a sbc with stahl header and my big block fits and looks alot better after some work
@Deville53 how do you have the steering shaft set up? I never seen it.
@gottalottafans
just a bracket racer
Hi! Bad A** S-10....Did you have to cut and move the Fire Wall back for the Big Block to fit in the Engine compartment? I'm thinking about putting one in my 1991 S-10 or My 1985 S-10....Which one would you put it in A 1991 normal cab short box or a 1985 normal cab long box? I'm using a 9" ford rear end with coil over spring and shocks....Let me know???? Thanks!!!!!
@CSXer
blower will be on it by 2011 layed off work so money is tight
@Deville53 would love to have some pics.
i want to do this.
dude i got an s10 4x4 with a 350 in it but it aint nothing like that
nice wire tuck
sweeeeet
nice f***ing truck who made the headers for you thxs
Nice. I love seeing these trucks with big blocks. Check mine out too!
@vaughnracing1
i can email you pics, i took good ones because it is a problem area
The sound of this thing Europeans just dont get. This sounds bad ass, If this were to come up behind me on the street, id pull over. But if a Ferrari 458 shit-talia came up behind be, all I could do is laugh about how pansy it sounds!!
@dookiss4 4 link from checkerd racing
@peacemaker50cal
should be about perfect
mike tate tulsa ok
i need your email adress and ill set you up with pics i have alot
@ttcarter18
918-960-4700 MIKE