You are an absolute genius Casper. My Hesh 3 were broken the 1st month I bought it.. it's been in the box for an year.. and now I got hope in my life.. thanks a lot for the design too...
Thank you so much! I was able to have a friend print the replacement parts and I was able to repair the HESH headphones, which are better than ever! :)
jamás en mi vida comente un video en YT, hoy lo hago agradecido bro, mande a imprimir tus archivos, pedí que suavizaran un poco las terminaciones y las uni según tú paso a paso y quedo perfecto, mañana mismo imprimo las del otro lado
Finally, i fixed my Hesh 3 with this method!! Thank you so much Casper. My headphones are in the road again and with more resistance!! Greetings from Argentina!
@@Rise_of_Retro I am from Argentina, so the cost is very different here cause the economy. I paid for everything $500 (pesos Argentinos) = $5 dolars. :)
@@adityarajkharde8516 Mine broke already. Its holding in its place with super glue and duct tapes. Why didn't they use metal. We would all be happy if that was the case. Build quality of this headphone sucks. I won't recommend it to anyone. Sound quality is still good though.
Hey Man, thank you, I was looking to this but you figure it out first, I am going to keep you update it if I am able to do it, thank you so much I apreciase your aport to the community
I bought this F*** headset and it was a pain in the ass they broked 2 months later and by now they are useless until now. Thank you so much. I will repair it.
Worthless? Be more careful with your stuff. Also skullcandy has a awesome 2 year warrenty. That I have used in the past. Send em back and get a new pair.
@@floppinfish Hesh 3 was my daily driver for over a year, and both pairs died no matter how I treated them. One was bought, the other was the warranty replacement. I don't care how you treat these, they break. The plastic is terrible and the customer has to fix it. Worthless is an understatement for the durability of these headphones. If you manage to use these as daily headphones for over 6 months and they don't break, God was holding that plastic together.
I am very hard on my headphones I used to use them into different factories and my three-year-old daughter plays with them and they have not broken yet just the battery has went bad so I'm not able to use it in for Bluetooth no more
Hi Casper, thank you for posting this information. The problem is that I don't know anything about 3D printing. I have found a place to send the plans but don't know what material to choose, or the layer of thickness, or the % filling - these are the questions I need to complete when requesting the job. is this information in the plan or?
I don't know why everybody's headphones are breaking I have had mine for almost 2 years and the only problem that I have had is my battery went out because I use them so much I need to know is there a way I can replace it
@@omarkhan6355 I've been trying to fix mine and I was looking for the right screw size I think it's a PH000 but I'm not sure. Let me know if you find out.
Hi @casper26 , i downloaded the design file but i still got one question. what size did you use for the Height, width and depth??? i use the centimeter unit!
Sorry, I have a Chinese set of screwdrivers that don't say it's size. I used the smallest one to disassemble and a bigger one for the new screws which are bigger than the original ones
@@shridharsingh5665 you will need a very small screwdriver to remove the original screws. I recommend you buy a cheap set of small screwdrivers cellphone repair style). Then you can use a standard screwdriver if you use bigger screws for replacement
You are an absolute genius Casper. My Hesh 3 were broken the 1st month I bought it.. it's been in the box for an year.. and now I got hope in my life.. thanks a lot for the design too...
Bro have you fixed it yet
@@sayantanpodder6811 yep. Order the 3d module from a local 3d printing service provider and just fixed it
Bro I'm freaking out a bit 3d printing sounds a bit sci-fi koi jugaad nahi hain kya ?
And anyways have you printed both side or only the broken one ? And how much is the cost ?
@@Harshavra how much did it cost?
Thank you so much! I was able to have a friend print the replacement parts and I was able to repair the HESH headphones, which are better than ever! :)
jamás en mi vida comente un video en YT, hoy lo hago agradecido bro, mande a imprimir tus archivos, pedí que suavizaran un poco las terminaciones y las uni según tú paso a paso y quedo perfecto, mañana mismo imprimo las del otro lado
Oh man you Rock. I was able to fix my headphones perfectly. Thank you for such a great video.
Awesome! I'm very glad you did it. Thanks for the feedback! Regards
Finally, i fixed my Hesh 3 with this method!! Thank you so much Casper. My headphones are in the road again and with more resistance!! Greetings from Argentina!
How much does it cost
@@Rise_of_Retro I am from Argentina, so the cost is very different here cause the economy. I paid for everything $500 (pesos Argentinos) = $5 dolars. :)
in which mode do you printed them DRAFT STANDARD or HIGH ?
Woah thanks man
Mine broke after a week
When I bought them I didn’t think they would be so small
The greatest man of all time!!! I can finally have my gym headphones back!!! And it works on both sides 😏
Muchas gracias!!! mis audifonos quedaron totalmente reparados al imprimir las piezas y realizar el cambio, lo maximo al compartir los files STL
Mine headphones are not broken yet. I'm starting to notice a crack though. Just coming here to prepare for the time it breaks. Thanks for the video!
@@adityarajkharde8516 Mine broke already. Its holding in its place with super glue and duct tapes. Why didn't they use metal. We would all be happy if that was the case. Build quality of this headphone sucks. I won't recommend it to anyone. Sound quality is still good though.
Thank you so much for your help, you're a genius. I could repair my skull candy hesh 3 and now it's perfect and stronger than before!
Glad I could help! Can you please tell me what size of screw did you use?
@@casper26 I pasted the parts using a glue.
@@prabhathbandara Oh ok, thanks
@@prabhathbandara bro will you plz help me to order 2 pieces for me? Please !
Lo chico que es el mundo! Gracias Gaspar!! Vine a buscar cómo cambiar el repuesto impreso y me encuentro con tu video 🙈 💪🏻 Saludos y gracias!!
Que justo! Jajaja Espero te sirva! Saludos!
Hey Man, thank you, I was looking to this but you figure it out first, I am going to keep you update it if I am able to do it, thank you so much I apreciase your aport to the community
Excelente bro..!! muchas gracias por tu aporte.. ahora puedo arreglar mis hesh 3 y me dio muchas ideas para personalizarlo.. YOU ROCK..!!
Buenísimo! Me alegro!
I bought this F*** headset and it was a pain in the ass they broked 2 months later and by now they are useless until now. Thank you so much. I will repair it.
Worthless? Be more careful with your stuff. Also skullcandy has a awesome 2 year warrenty. That I have used in the past. Send em back and get a new pair.
@@floppinfish They brake even being careful. Unfortunately the new pair would be defective too. It is a manufacturing design defect.
@@floppinfish Hesh 3 was my daily driver for over a year, and both pairs died no matter how I treated them. One was bought, the other was the warranty replacement. I don't care how you treat these, they break. The plastic is terrible and the customer has to fix it. Worthless is an understatement for the durability of these headphones. If you manage to use these as daily headphones for over 6 months and they don't break, God was holding that plastic together.
No hablo mucho ingles pero lo entiendo, eres la mera vena! Saludos desde México y muchas gracias por tu aporte!
De nada! Un gusto!
From where we can buy this part
THANKS A LOT!!! Man, you're great!! Greetings from Peru!
You're welcome! Thank you! Happy for you!
Worked out great! Thank you.
I'm glad it helped! Can you please tell me what size of screw did you use?
Muchas gracias espero imprimirlo pronto
Men, thank you very much for your help, you're a genius
your welcome! I hope it helps!
Thank you Casper
so i fixed the headphones by using super glue but the glue ran down to my volume button now I cant turn it up please help!!!
I don't know. Did you have a broken yoke? You didn't print the 3D part I suppose
Great video!
I am very hard on my headphones I used to use them into different factories and my three-year-old daughter plays with them and they have not broken yet just the battery has went bad so I'm not able to use it in for Bluetooth no more
Thanks you!! Great video ! I'll fix my hesh 3 like this!
Your welcome!
Hi Casper, thank you for posting this information. The problem is that I don't know anything about 3D printing. I have found a place to send the plans but don't know what material to choose, or the layer of thickness, or the % filling - these are the questions I need to complete when requesting the job. is this information in the plan or?
thanks for sharing it with us
I don't know why everybody's headphones are breaking I have had mine for almost 2 years and the only problem that I have had is my battery went out because I use them so much I need to know is there a way I can replace it
could you not strenghen any weak bits in build with carefully applied epoxy before they break ?
I did. But they break anyways. Faulty plastic
what material did you use?
Thx for the tutorial bro
your welcome! you mean for the printed 3D part?
@@casper26 yeah
@@casti128 using PLA
you can use ABS too
@@casper26 thankss
thank you very much, you're my hero!! 🥰
You're welcome! I'm glad it helped! Can you please tell me what size of screw did you use?
The hesh 3 has the same parts as crashers?
Hi there is the right and left design same? Or should i make a mirror? And if so on which axis y or z thank you in advance ❤️
Hi! They are the same. You can print it 2 times. Cheers
Alguien sabe la medida del destornillador??
Tengo la misma duda!
Works for skullcandy crusher wireless? i think its the same, but... what do you think?
Where i can buy the hinge bro please help me
FROM WHERE U PURCHASE EARSHELL YOKE PLZZ TELL GUYS IF ANYONE KNOW 👇👇👇👇👇👇
Great video! Although the link is not working may be for me.. can you email the file?
Hi! Thank you! You may also use this one: www.thingiverse.com/thing:3979639
Hey guys, did anyone try to fit in original screws by making changes to the design?
Hey man what size screw driver did you use to take apart the original hanger screws?
Hi. I don't remember. You can use anyone that fits. They come out easily. You should buy a set with different sizes
@@casper26 i tried different sizes but it isn’t coming out easily thats why i had to ask
@@omarkhan6355 I've been trying to fix mine and I was looking for the right screw size I think it's a PH000 but I'm not sure. Let me know if you find out.
Hi bro I need your help my head phone broke
Gracias bro, me has salvado
can anybody give me design of this :(( i can't give from this link :((
I am on my fourth headset they keep on replacing all break in the same spot
Sad
I’m having same problem with my headphone .. I don’t have 3D printer so how can I fix my headphone...?
Hi! You can search google maps for a 3D printing service in your area or you can order it online
@@casper26 pls tell me the website in which thise replacement parts are available
Hi @casper26 , i downloaded the design file but i still got one question. what size did you use for the Height, width and depth??? i use the centimeter unit!
Hi! I sent it to print, didn't print it myself. But printed it is 8.5cm width
Anyone have a non broken link for the part?
Thanks for reporting: www.dropbox.com/s/2lwpphvkg1ewh80/Skullcandy%2BHesh%2B3%2BHeadphones%2BYoke%2B%28Separate%2BSTL%2Bfiles%29.zip?dl=0
question is How do I get one..I dont have a 3d printer
You can search google maps for a 3D printing service in your area or order it using an online 3D printing service
@@casper26 I will look into this thank
Can you send me a link that is not broken? thanks broooo
It's in the description
The link doesnt work- I press and it says something went wrong
Hi! You may also use this one: www.thingiverse.com/thing:3979639
Hi what size of screws did you use for this?
I used 3/8” long (~1 cm) and 1/8” width (~2mm) screws. Good luck!
My left speaker ain't working.
Thanks Bro
Welcome!
¿Vendes las partes hechas en impresora 3D?
No..
Aun no lo imprimo, voy como 2 años deprimido por mis audifonos pero esto al menos me da esperanzas.
Enserio gracias.
Te chuparia el pe## 😂
What size head screwdriver did you use?
Sorry, I have a Chinese set of screwdrivers that don't say it's size. I used the smallest one to disassemble and a bigger one for the new screws which are bigger than the original ones
casper26 what do u suggest we use if we don’t have that size screwdriver
@@shridharsingh5665 you will need a very small screwdriver to remove the original screws. I recommend you buy a cheap set of small screwdrivers cellphone repair style). Then you can use a standard screwdriver if you use bigger screws for replacement
Can't believe how many people had this problem .. mine broke the same after 2 months
Xd
Where you print them?
at a 3D printing service shop in my city
How heavy is this print? Individual weights in grams pls.
I haven't weighed them, but they are really light. They must be around 10grs each
@@casper26 thanks. I don't own a 3d printer myself and the one at my local library cost 15c per gram of final weight, so I'm glad they're very light.
@@casper26 what size were the replacement screws?