Also, I use a small torch/jet lighter to heat the pinion gear set screws before removing them, helps a lot. On motors and driveshafts they're usually super glued or loc-tite'd in.
Thanks I will have to try that, I started using a soldering iron but it's still not very successful, hopefully a lighter will be next time I need to do this! :)
Can you just use the motor and esc to convert this? Do you need the new reciever etc? About to buy it but they sell the motor and esc separately which is a bit cheaper
You need to buy the others too, the car has a inbuilt esc and receiver so you can't re use what is already in the car unfortunately, and the servo is a 5 wire, most esc's use 3 wire so you will need a servo too
Hello, They are as below :) Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199
The motor I have is a 9000kv and it's more for top speeds and it does cog a little bit from a stop, if you want to avoid this I would think going with a 3800 or 4300kv motor, oh and this is in the 3650 size. Also just an fyi if you go brushless you will need a servo, remote and receiver and esc as well. Hope this helps.
The JX PDI-2506MG servo is supposed to be a direct fit for the 12428, I haven't gotten mine yet though. EDIT: as Super RC said, this is a 3 wire servo which won't work with the stock ESC (5 wire).
Ok cool, thank you and could you let me know how it goes when you get it, I'm interested to hear! And more for if anyone else is reading this it won't fit with the stock esc as stock is 5 wire and this is three.
@@Wltoys Got the servo in and it is a direct fit, I used the metal mounts so I could put my esc over top of the servo easier, but the plastic one also fits.
Hi Joel, Yes I do, here is a general bashing one: th-cam.com/video/VmKWfT_QWEc/w-d-xo.html And here is a trail run: th-cam.com/video/XfuqGfEs5kg/w-d-xo.html
Hi Rules, Please see below for the parts I used, also something to note with the stock tires I would not use 100% power as they might pop, some foam tires would be a good upgrade for on road, I'm not sure about off road ones as yet, but will let you know when I have tested some. Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199
@@haid0ry790 the 9000kv is not rated for 3s/11.4 volts and that's the next battery up if you do it might work but can burn out the motor very quick. If you get the 4300kv version that is rated for 3s/11.4 volt batteries.
@@haid0ry790 They will work out of the box, but if you want to change breaking strength, take off strength, low battery cut off then you need a program card.
@@haid0ry790 You can, I don't think you really need it as they don't heat up anywhere near as much as the brushed motor of the same size, but if you really want to you can add a fan. Sorry what do you mean wait for the lights to go out, as in the low voltage cut off?
Witam Rafal, są to części, których użyłem poniżej, ponieważ inne elementy, z którymi samochód jest dostarczany, nie będą działać z nowym silnikiem i esc Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199 Jeśli możesz wydać trochę więcej na silnik, otrzymałbym czujnik bezszczotkowy i czujnik esc, takie jak te www.aliexpress.com/item/1005003409804836.html?spm=a2g0o.order_list.0.0.21ef1802ziFiWj www.aliexpress.com/item/1005001963255998.html?spm=a2g0o.order_list.0.0.21ef1802ziFiWj mam nadzieję że to pomoże :)
I'm not sure if you can, I have had a look for documentation but I couldn't find any, and the binding documents for the x6fg all refer to use with the X6 Radio Transmitter.
@@haid0ry790 I'm not sure and I wouldn't want to give you the wrong information. Your best option would be to contact their support, here is their website, and the have a link down the bottom of the page to contact them via Facebook. www.dumborc.com/en/category/technical-support/
What's your next mod?
What about the remote bro
@@Hyper_volks954 I got the Dumborc x6 with X6FG Receiver - this model receiver has a built in Gyro :)
Also, I use a small torch/jet lighter to heat the pinion gear set screws before removing them, helps a lot. On motors and driveshafts they're usually super glued or loc-tite'd in.
Thanks I will have to try that, I started using a soldering iron but it's still not very successful, hopefully a lighter will be next time I need to do this! :)
Yeah this other guy said on older wltoys they superglue a lot of screws 😳
@@divingfalconfpv4602 ah that makes sense then lol. I guess better to glue them than lose the screw, but hopefully they use loctite now.
@@divingfalconfpv4602 Ahh ok, I thought it was loc-tight by the colour, but I could be wrong
Can you just use the motor and esc to convert this? Do you need the new reciever etc? About to buy it but they sell the motor and esc separately which is a bit cheaper
You need to buy the others too, the car has a inbuilt esc and receiver so you can't re use what is already in the car unfortunately, and the servo is a 5 wire, most esc's use 3 wire so you will need a servo too
Thanks mate!
nice video and beautiful car👏👏
Thank you! 🙂
Can you tell me the name of the upgrade parts. Was it a kit. Thanks
Hello,
They are as below :)
Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI
Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199
Wltoys now make a standalone receiver which works with the original remote and costs peanuts. Saves more money on the conversion
Oh cool!
Do you have the link by any chance?
@@Wltoys
I want to buy like a motor, but there are different forces and different prices. How powerful is your motor
The motor I have is a 9000kv and it's more for top speeds and it does cog a little bit from a stop, if you want to avoid this I would think going with a 3800 or 4300kv motor, oh and this is in the 3650 size.
Also just an fyi if you go brushless you will need a servo, remote and receiver and esc as well.
Hope this helps.
The JX PDI-2506MG servo is supposed to be a direct fit for the 12428, I haven't gotten mine yet though. EDIT: as Super RC said, this is a 3 wire servo which won't work with the stock ESC (5 wire).
Ok cool, thank you and could you let me know how it goes when you get it, I'm interested to hear!
And more for if anyone else is reading this it won't fit with the stock esc as stock is 5 wire and this is three.
@@Wltoys I should be getting it tomorrow and then can finish the brushless install on the 12428 I hope. And good point on the 5 wire vs. 3.
@@Wltoys Got the servo in and it is a direct fit, I used the metal mounts so I could put my esc over top of the servo easier, but the plastic one also fits.
@@M.TTT. Awesome, thanks for letting me know :)
Do you have the video where you run the car?
Hi Joel,
Yes I do, here is a general bashing one: th-cam.com/video/VmKWfT_QWEc/w-d-xo.html
And here is a trail run: th-cam.com/video/XfuqGfEs5kg/w-d-xo.html
Can u put link for those upgrade parts for brushless setup?
Hi Rules,
Please see below for the parts I used, also something to note with the stock tires I would not use 100% power as they might pop, some foam tires would be a good upgrade for on road, I'm not sure about off road ones as yet, but will let you know when I have tested some.
Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI
Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199
@@Wltoys Really Appreciated it brother.. Love from Bangladesh
@@Wltoys helpful bro thanks ❤️
@@Hyper_volks954 :)
@@Wltoys which motor size and kv you chose?
Can I use your battery more than 7.4
Hi Haid0rY,
Sorry are you asking can you use a higher voltage battery with this setup?
@@Wltoys yes
@@haid0ry790 the 9000kv is not rated for 3s/11.4 volts and that's the next battery up if you do it might work but can burn out the motor very quick.
If you get the 4300kv version that is rated for 3s/11.4 volt batteries.
Will the engine power increase?
@@haid0ry790 for the 4300kv yes it will
Barely waiting for speed test and bashing of brushless setup
Thanks Rules,
I'm hoping to have it out by late next week 🙂
Is the ESC A120--A80
different because there is a difference in price and my budget does not allow
The esc is 120a, but 80a should would work fine too as they both work on 2s battery's
@@Wltoys The battery operates at 7.4v, so you only need programming, right?
Can I add cooling to the motor? Will I wait for the lights to go out?
@@haid0ry790 They will work out of the box, but if you want to change breaking strength, take off strength, low battery cut off then you need a program card.
@@haid0ry790 You can, I don't think you really need it as they don't heat up anywhere near as much as the brushed motor of the same size, but if you really want to you can add a fan.
Sorry what do you mean wait for the lights to go out, as in the low voltage cut off?
Witam. Mozesz dac namiary na zestaw silnika bezszczotkowego
Witam Rafal,
są to części, których użyłem poniżej, ponieważ inne elementy, z którymi samochód jest dostarczany, nie będą działać z nowym silnikiem i esc
Esc - www.aliexpress.com/item/4000004724492.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor - www.aliexpress.com/item/1005001839717608.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo - www.aliexpress.com/item/1005001914645186.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Servo arm - www.aliexpress.com/item/1005002948175535.html?spm=a2g0s.9042311.0.0.27424c4dSrtmlg
Motor mount - www.aliexpress.com/item/4000598854296.html?spm=a2g0s.9042311.0.0.27424c4d2VO7pM
Servo mount - www.aliexpress.com/item/4000960919619.html?spm=a2g0s.9042311.0.0.27424c4dvNSzbI
Remote and receiver - www.banggood.com/DumboRC-X6-2_4G-6CH-Transmitter-with-X6FG-Receiver-for-JJRC-Q65-MN-90-Rc-Car-Boat-Tank-Model-Parts-p-1454329.html?p=PA170262218173202110&custlinkid=1704199
Jeśli możesz wydać trochę więcej na silnik, otrzymałbym czujnik bezszczotkowy i czujnik esc, takie jak te
www.aliexpress.com/item/1005003409804836.html?spm=a2g0o.order_list.0.0.21ef1802ziFiWj
www.aliexpress.com/item/1005001963255998.html?spm=a2g0o.order_list.0.0.21ef1802ziFiWj
mam nadzieję że to pomoże :)
Dziękuję Bardzo. POZDRAWIAM
Can i connect the x6fg receiver to the same car remote control as wltoys 12428
And X6F
I'm not sure if you can, I have had a look for documentation but I couldn't find any, and the binding documents for the x6fg all refer to use with the X6 Radio Transmitter.
Can I use the X4 remote?
@@haid0ry790 I'm not sure and I wouldn't want to give you the wrong information.
Your best option would be to contact their support, here is their website, and the have a link down the bottom of the page to contact them via Facebook.
www.dumborc.com/en/category/technical-support/
My upgrade
Motor 3650 (kz5200)
ESC kk A80
Servo 15kg s1500m
Eec programming card
Receiver X6FG remot X6
I can connect light?
On ESC
The plugs don't fit, you might be able to get an adapter or you might need to solder the correct connector on.
هل استطيع ان استخدم مثل الريمرت القديم
Sorry not sure what this means?
the speed is
I have got 77km/h I think it could do more given a longer road and some mods for better stability.
9000kv 2s ? :-O
Yeah, it's got a lot of top end I can't make use of as it's unstable over 65km/h or so
My upgrade
Motor 3650 (kz5200)
ESC kk A80
Servo 15kg s1500m
Eec programming card
Receiver X6FG remot X6
Nice, I hope it goes well!