BLIND Temu EDC Haul Under $100
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- In this video, we'll be uncovering a curated selection of everyday carry essentials with a twist - all chosen by Kirsten. Discover the surprising and budget-friendly EDC gear as I unbox and explore each item. Whether you're a seasoned EDC enthusiast or just starting your collection, this blind unboxing is sure to bring some unexpected gems to light.
Pouch: share.temu.com...
Lighter: share.temu.com...
Tourniquet: share.temu.com...
Small Pocket Knife with Keychain: share.temu.com...
Fidget Toys: share.temu.com/
Pen: share.temu.com...
Lanyard Bead: share.temu.com...
Pry Bar: share.temu.com...
Multi-tool: share.temu.com...
Pocket Knife: share.temu.com...
Multifunctional Pen Flashlight: share.temu.com...
Neck Knife: share.temu.com...
Damascus Pattern Fixed Blade w/Sheath: share.temu.com...
Kids, Chaos, & Coffee Podcast: podcasts.apple...
#EDCUnboxing #EverydayCarry #BudgetEDC #blindreact #Under100EDC #temuedc #edc
Hey man, the multitool is a knockoff of the Gerber Demo. I carried one for 13 years before it finally gave. Its for Demolitions, specifically for C4 preparation. The "Keychain" is for tying off the tool to 550 cord and attaching to your person as a dummy cord. The "awl" is for punching a hole into the end of a brick of C4 to put the blasting cap. The "wire strippers" are for crimping said blasting cap to the detcord. I loved mine to pieces (literally).
Check the spine of the folding "Damascus" knife, if you can see folds then it's pattern welded if not it's etched, the "Gerber" tool is supposed to be the EOD Gerber with blasting cap crimper the awl is meant for making holes for cap implement
Very interesting haul - thanks for showing. I too purchased some gear from them and am quite satisfied.
#1 Lighter - it's an Arc Lighter, very useful, as long as you can recharge it. Stormproof, very hot, and they come in several different variants. Mine is a COB-flashlight as well, which I find very useful. But watch out - mine didn't come with a rubber seal, so I would bet, it's not waterproof as they claim.
#2 Tourniquet - I consider it to be the most useless item, no matter, how well it works. Just a single-use item and can easily be replaced by a lenght of paracord and a stick.
#3 Prybar - keychain gadget, I have one without paracord wrap. Useful for prying on small boxes, pulling small nails or staples.I ground one side semi-sharp as a box cutter.
#4 Organizer pouch - fits most of my EDC-gear and can be hung from your neck. No Nylon, just PP (polypropelene) as always from China, so it will fray over time.
#5 Pen-Flashlight - at least three essential survival tools
#6 Screwdriver - handy little tool in an urban environment
#7 Titanium Lanyard Bead - at this price I won't rely on their claim to be titanium, most of the time this refers to its colour or appearance
#8 Titanium Pen - see #7 - small and sturdy, it's ok to me
#9 Neck Knife - Wouldn't trust it to be 440C either, but fairly sharp and useful.
I personally don't care, if they are not sharp out of the box, I sharpen ALL my knives to a razor, a dull knife just takes five minutes longer. Never got one that was up to my standards.
#10 Pocket Knife - Cool looking and usable, but definitely no damascus - I guess,they etched the pattern, so it doesn't wear out quickly.
#11 Multitool - Knock-off of the Gerber MP600 DET (Demolition Explosives Technician-220€) - a specialised tool, you probably will never need, if you're not a pioneer or engineer
#12 Fidget Toys - making your son a warrior - Geronimo!
#13 Damascus Fixed Blade - look #10 - and faux leather (plastic), even scented to mimic real leather
Are these items worth buying from temu? No, you support their piracy strategy to bring down our economy - and child labour.
Yes, if you don't care and are on an extreme budget, or need an expensive tool for a once-in-a-lifetime-project.
BTW: you should do something about the bad audio in that room (or your micro)
Cheers bro
Feather Pattern Slip Joint Folding Knife Olive Wood (3.14" 5CR15) ZD-057 Blade material: 5Cr15 steel
Hardness: 58 degrees HRC
Handle material: stainless steel + olive wood
Surface treatment: 3D printing process
Nice presentation! You will be surprised at how many great EDC toys TEMU offers on a daily basis.
The tourniquet is probably fine
Hey, you did say it's an unfinished room... Good subject, always good to see up close the Temu stuff. That said, you might want lift the camera up a couple feet and look down on the table. Add light pointing down at the table from the side. Just saying what I think would enhance the show. I do like the simplicity of the table and wall behind.
Seems like a good way to start a friendly rivalry. What would you do with $100 on Temu for her and let her open it blind. Turnabout is fair play.
You may be on to something lol
Awww I love that idea!!
Be on the lookout for this in a future video! :) It's going to be fun!
The "ZD" Stands for "Zero Dollerance" and that also reflects the msrp.
Great haul, nice job brother ❤
oh I like that EDC Pouch but out of stock on black but a little expensive more than the molle that ive been buying but will check when the price goes down or maybe search another seller if they got it or maybe yet can do it myself and save money
Run Forest Run!
The first opener you took out was a can opener
With the multi tool, that weird rond thing i used for a car window smasher. Other i d k.
Im guessing some of the chinesum will work in a pinch if needed
the first opener is a can opener
"I'm not even going to try to say the name, then proceeds to try and say the name."
lol
Your wife did well!
Love your jacket! Great content by the way
Thank you so much!! 🙏
When you do a close-up view of the product, you don't have to put it so close to the camera. It's to close to focus. Maybe 10 inches away would be better. It looks like you are like 3 inches away from the lens and you don't give the camera time to auto focus. Otherwise I do like your vids.
Trying to be better about that. Thank you! 😊
For not wasting my time I'd appreciate chapters very much! So I can skip everything I'm not interested in or already own.
Nice video,really helpfull
Please practice more with the tq here in the netherlands trained people need to be able to apply one in 10 seconds and tight.
We test with a heartbeatsensor over the finger to see if applied correctly
I appreciate that! I have trained a lot with TQ's but I haven't recently so I am a bit rusty for sure! Thanks for the feedback!
The center of the pliers is a crimp tool
Good vidio
One of the biggest problems with all these cheaper than dirt gadgets (i.e. the electronic lighter, which is pretty cool btw) that are rechargeable is their rechargeable batteries never last more than a few months, maybe a year and are not replaceable. Thus the device itself is then trash.
the gun and knife re fridgid toys
The stiching or plastic will fail on the TQ ive tested a few. dont trust it
I believe it
Please post the link for that pouch as I did not find it in the links. Thanks
Added 😁
@@NomadicNichols Thank You.
What does your wife think of the Tote bags on Temu? There was one that was covered in Molle that I liked.
We will definitely have to check them out! She's not much of a bag carry person unless its a backpack or a fanny pack style pack.
@@NomadicNichols What I do not like about Temu is ttbe search terms being vague, and no product number.
Gas station knives..
Be more prepared next time
How so? It was a blind reaction lol
All junk
Stop wasting your money!
Temu is not a waste a hole !
Blasting Cap Crimper and Powder Punch
The multi tool is a copy of a Gerber EOD.