Installing a small diesel heater in the workshop
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Hey, Vevor sent me this cute little heater to heat my shop this winter, let's test it out
Affiliate links
Vevor Diesel heater
Code: VVMH5%OFF (5% off on all products)
EU Site:
New Diesel Heater: s.vevor.com/bfQCpr
8KW Diesel Heater: s.vevor.com/bfQMr9
5KW Diesel Heater: s.vevor.com/bfQMsi
All Diesel Heaters: s.vevor.com/bfQMrW
US Site:
New Diesel Heater: s.vevor.com/bfQMsw
5KW Diesel Heater: s.vevor.com/bfQMsU
All Diesel Heaters: s.vevor.com/bfQMsy
Table of content:
00:00 Intro/unboxing
06:48 Installing the heater
11:03 Installing the exhaust pipe
25:25 Connecting it up & testing
34:50 Making improvments
38:45 Installing CO2 detector
Thanks for watching
Want the support the channel? Consider leaving a like/comment or subscribe, also there are the SuperThanks, Patreon or PayPal options available.
Patreon (Upcoming projects and insight) - / antspants
PayPal Link: paypal.me/AndrisArike?country...
Amazon wish list: www.amazon.de/hz/wishlist/ls/...
Want to send me something? - contact me via e-mail: theevilchicken@windowslive.com
Feel free to also follow me on Instagram - / ants__pants - แนวปฏิบัติและการใช้ชีวิต
![[LIVE] : ONE ลุมพินี 71 วันนี้!! คู่เอก "ทรงชัยน้อย vs รักษ์"](http://i.ytimg.com/vi/_AGPnq2p6Js/mqdefault.jpg)
Have a great weekend everyone,
PS: if your interested about the Vevor diesel heater, check out the description for a link.
Thanks, I'm loving the cabin renovation
Lidl sells the CO detectors for 9.99EUR, with all the german TUV certifications! (I think in this situation a CO detector is more important than a CO2 detector that you bought... CO will kill you long before the CO2 reaches dangerous levels!)
Oh, and the amp clamp you used only measures AC amps, you would need a slightly more 'expensive' one with a 'zero' button that can measure DC amps... The value you measured is meaningless sadly... just FYI :)
@@jovangrbic97 i have 4 co detectors 👍
@@Ants_Pants Can't be too safe, good! What was your thinking to add the extra CO2 detector? DO you not think the CO detector is enough for warning?
I laughed 😂😂 when you installed the flex tube and gave it a wobble 😂😂😂
🤔😅😅
I like when you curse in estonian😂
Brilliant dry sense of humour with a practical grasp on engineering! Good man!
The nice thing about the battery is that the power can be out in the shop and still be heating.
Losing power when this is running isn’t great for the heater.
@@White000Crow he meant you can lose utility power, not battery power. It needs battery power to run the fan. 10 to 40 watts for the fan to go. 135 watts or so for some minutes to warm up. At 12 volts.
@@fitybux4664 I ran one off a power supply and after about 6 power outages it’s no longer running. I’m now on battery backup and the heater has been flawless.
After doing some research I’m certain my atomizer screen is gummed up and that’s why it will no longer start.
@@White000Crow that sounds probable, yes. Time to tear it down and repair if you're into that. Otherwise, they're around $100 and might just be simpler to replace. Definitely run it off a battery, definitely let it do the cooldown cycle.
In some cases, it is possible to clean the heater without disassembly, by running the heater on high using Kerosene instead of Diesel fuel.
@@fitybux4664 I have 5 of these heaters already.
I’m keeping the clogged one for spare part since the new unit I put in has a different controller. I have 2 of these new units so I can swap them out quickly and repair the unit that’s down. I just rebuilt one because the bearings in the motor were full of dust and failing. New rubber sealed bearing should last longer and I added a little more grease to them just in case.
If you shake it more than twice, you're playing with it.
😂
He shook it way more than that redsable, and he appeared to be enjoying it just a little too much. Have to watch the lad.🤣🤣 Cheers from Canada
Cheers from a fellow Canadian!@@BCGray10x
I said that to my dad's buddy once and he said it's mine ill play with it if I want to😂
My girlfriend told me the same last night
I have one of these heating my shop. Its awesome and cheap. One thing I would do on your setup would be to switch the exhaust and intake pipes around, that way you would recover more heat from the exhaust on the long run of pipe through your shop.
My thoughts exactly!
Great idea
it should warm the stone wall on the exhaust wall, because it was so tightly fit, pressure and hammer fit
@@jasonmacdonald5468 yeah the stone gets warm around the pipe.
It looks hard to install when pipes come out at the bottom.
Wow, another week end who start very well with your project, always a pleasure watch your project 👍👍👍👍
Good job. Looks good. nice to have heat!
Great video. Stay warm.
I have been interested in this heater for a while. I guess I just need to get one. I always put off projects in the shop due to the winter cold. Thank you for the video 👍👍
Typical Ant / Andrew solution weld the bits together! Bravo!
You have lots of nice tools, and it's fun watching you work!
thanks
I enjoyed you episode so much. What a heater-bad boy! At least it will heat your workshop when the winter comes. Have a fantastic weekend Andris, I can’t wait until your next episode, we never know what’s coming!
Thank you! You too!
Nice sheet metal work!! Thanks for sharing.
Thanks for watching!
Cool now you have some heat makes it a lot better to work in😊
Good thing they are fairly safe !
Great job
Great video Ants, entertaining as usual 😀👏👏👏
Sir I think your doing a great with your videos love be watching you fix the things you choose to fix
Thanks bud
Happy 40k subscribers, Andris!
🎉 Thank you Sandy
LMAOOOOOO! 😂😂😂 YOU WERE WIGGLING THE BLACK THING LIKE A DING DONG!
Ding dong😜
so for fun our boy loves to play with long black " pipes "
haha
My friend installed one in his shop ,he ran the exhaust through a flat domestic house radiator ,the exhaust heated the radiator as it passed through it
Im looking for one
OMG, big floppy was so funny!
Damn looks like a stallion waiting something to happen….we have the same thoughts Andris…..at least keep your workshop warm. …..we don’t want you to get sick n miss all your videos….hehehehe…..goood design by the way….stay warm Andris!
😅👍
I haven't seen anything that tight since high school. lol
😂😂
I love that clock!
cheap made in china clock. so far it has been working fine by some miracle though
Congrats Ants Pants, on getting the Vevor Diesel Heater to run good. engineering and math at it's best.
Nice heater bro. Cool video.😊
Thanks for the visit
Love your videos bud! Keep being awesome!
Thanks Mike
You were having way to much fun playing with that "pipe"!😂😂😂
So very weird 😅
love it. greetings from Tyrol
Hello there!
It is really concerning how much you enjoyed playing with the hose.....LOL.
Lol 😂
Good video bro, enjoy your weekend!
You too
Thanks for the laughter my freind
No problemo
Yes finally! Now you can work with lathe safely😂😂 im kidding im happy that you can heat your workshop and not freeze like ice cube in winter😂
Yes 😂
the south park train entering a tunnell sequence kept repeating as the pipe was hammered thru foundation LOL
lmao
I don’t understand the knocking noise! Thanks for sharing Andris, stay safe, warm and healthy throughout this winter brother! 🙏🏻🙏🏻🙏🏻👌🏻👍🏻👍🏻🇺🇸
Fuel pump, think the metal box i made amplifies it sonewhat
Thank you very much for the video. 👍🤗👍🇸🇯
Good stuff Andris! I have a similar heater in my un-insulated wooden workshop, and it works a treat, you'll really see / feel a difference using it this winter! I am just getting caught up after spending a week in the sun. 33c in Gran Canaria, 8c here at home in UK. :(
👍👍
This a proper install, most people just shove the exhaust pipe through the window, and call it good enough
Congrats to you for a good job, well done
Thanks! 👍
This is so cool.. many people heat th eir workshop this way... Take a budget parking heater, put it in a housing... ready!
Yyp
You crack me up...
Cheers Buddy!
Cheers
I've a diesel heater on my truck's cabin and, honestly, I made myself the same question that you when i saw the heated air pipe 🤣
Haha 😂
1:28 got me lmao
lol
You can get a ham radio power supply. Theyre 13.8V and you can get a 30 amp one.
Funniest and best person on TH-cam! 😂😂
I just started watching your videos and I love it. And instead of seeing someone getting everything done right immediately, right off the bat, you run into problems, and then more problems. I laughed because that's what I usually do. I literally hate watching people on youtube who go showing themselves doing something right without any problem throughout the entire job, when you know damn well they had to have had a problem here or there, even the best of us. Thanks for showing me about the heater. I am ordering myself one today.
Cool. Yeah man. Life itself is one big problem to solve 😅
Omg i pissed myself laughing at Andres & that tubing... We are all human arent we
😅
this is your first video I watched and subscribed right away! BRAVO and if I buy this heater I will use your link
Thanks bro :)
My experience with trees that close to a foundation will eventually destroy the foundation, But that's for another video I hope 😊
Keep Em coming I love it
Need to get that waterpump back into Joseph, 😅
You're situation is perfect for a wood-fired boiler. The stream is right there. Just for the Shop. 2 or 3 radiators from junkyard, a well type pump. Fab a firebox with a water coil inside. All housed in a separate unit outside.
Good installation Andris, I knew you would get a heap of use out of your new fabrication tools once you got them installed and I wasn’t wrong, heaps quicker and better result too I reckon, well done mate, as always, cheers for now
Thanks 👍
It's a good idea to fit a Carbon Monoxide detector in your workshop just in case.
Until I watched the rest of your video 😂
I have one. Both actually. Co2 and co
Highly in favor of this new video format with the added encore. More content = better! Great stuff as always 👍
Awesome, thank you!
This guy sounds like Ott Tänak for me. 😊
haha
Fantastic Ants, now you have decent shop heating. I prefer a woodstove over a diesel heater. But woodstoves need a certain setup and they are a hazard that needs constant attention. So in your setup a Diesel heater is better. Also having a diesel heather is very good to heat up tractors crank case and gear oil, when it's super cold outside.
This is short term. I will go firewood eventually
You forgot the hardhat. You know it makes you look more professional too. Stay warm!
Hehe 😅
"In addition to the heater we also got skynet" 🤣💀
true
"Have a nice day. Stay safe, for now. We will meet again. Shutting down." 🤖
That's good for a very small room
I have the same heater in my shop and frist i installed it at one end like you and found other end lot colder so installed it in the middle of the working area now heat gets to each end work area is nice and warm the ends are colder when working just work faster
Very cool!
Jesus, you have more determination than I’ve ever seen in my entire life LOL
Lol
I just bought another one. They are really awesome. They arent loudless but nothing are
Thinking about doing some upgrades to the exchaust pipe, maybe add a radiator or a long pipe before it goes outside.
The Battery is perfect. It needs power after you switch it off, to allow the fan to cool down inside.. A trickle charge charger will be cheap and is exactly what you need.
Actual startup current when the glow plug is on is probably more like 8-9A. CO/CO2 detector will tell you if the heat exchanger has failed; all combustion products should exit outside through exhaust pipe. You can get cheap powerful Chinese 12V power supplies if you have issues with the battery running down - And they have a pot to adjust the output voltage, which you could set at your battery float voltage of ~ 13.6. I like the battery though, because it will work even if your power is out. The smell will go down once the materials off-gas a bit more. You can also use a longer exhaust pipe inside to extract more heat for higher efficiency. Cool garage, I wish I had that!!
I think the longer pipe is a good idea, i also thought maybe to use a old soviet style cast iron radiator, but i am afraid if i restrick the airflow too much then that might be an issue
Stay warm buddy
Will do
So I'm guessing this little heater is a boy.😁Stay warm my friend, stay warm.
😅
the big black floppy thing directs your heat, as heat rises you stretch it and point down
This guy is funny lol thanks for the laughs loved when the pump started ticking and ur reaction lmao
😄
I have a summer lake cabin with a split AC to keep the place warm in late autumn when I got an winterize it. Although it also has fan, it takes an awful lot of time to reach the order side of the house (it is only 35m2). I have a big fan to move the air around and it makes a big difference.
Got it
Yep nice to have a heater in your Workshop👍😌 Also as a few already mentioned, you need a Carbon Monoxide detector
I have 😇 thanks
You are so funny, 😂 great video
Thank you 😁
Very nice, now for some more cabin renovations please!!!!!
More to come!
HI ! I love your videos !
The laud clicking sound you hear, is from the fuel pump.
It should be much quitter, but it probably echoes thorough the mounting you pressed it in.
If you open the box and try to isolate or soft mount the pump, it will probably run much quite.
Good luck, Noam.
it's not. It's the motor working (combustion little explosion).
@@danieledomenicali no it is the fuelpump. this is not an engine
Congrats on hitting 40k subscribers
🎉
Great to see the fire extinguishers, I’m in the business, !!!!
:D
first drive the drill bit back and forward many times with slight presure on the sides second always clean the hole
Great score Andris! If I may make a suggestion that’ll help you see the work rather that the workspace when welding. A simple led headlight you can find anywhere for cheap, just remove the head strap and velcro the light to your helmet. It’s nice to see what your welding, now I can really see just how much grinding and paint I’ll need afterwards lol. Thanks for taking us along✌🏼
thanks for the tip.
“Pretty sure them boulders won’t catch on fire”!! That’s funny man; also, I love the boulder work bench; so old Europe! Cheers from Washington State 🇺🇸!
:D They get warm though, extra heat capture
That klicking sound is the dieselpomp you can hang it in rubber.
Ok
Buying one my self next week. Great vid by the way. 😊
Thanks bud
@@Ants_Pants Keep em coming Mr Pants. Your content is, informative, entertaining and humerous .😁😁👍👍
This is some funny stuff! I wonder what my fart would do, probably set the thing on fire or something. lol - gave me a great chuckle - and great work on the install - subscribed!
Thanks mate, it has been pretty awesome so far, love working in + 7 while it's -21 C outside :D so good. Never had this option before
Tanks for your vid ❤❤❤
My pleasure!
That banging would drive me insane
Thought so too. Totally used to it by now
5:30 If you dribble it more than twice, it counts as playing with it. Don't forget to flush! 😆
Lol 😅😂
Hey buddy! Vevor sent me one of these as well but mine has the one with the external fuel tank and pump. A few tips: one I would put a long pipe on the exhaust like you did on the intake and just the radiant heat from that will help warm the shop. Two I would just get one of those small cheap battery maintainers and hook it to the battery to keep it charged all the time. I noticed your fuel pump makes a loud noise on yours, mine is pretty quiet so maybe check yours and make sure there isn’t any air in it or somthing isn’t loose. Man your shop sure has came along way I wish I had one that awesome!!
Hey bud. Got it. The charger i got has a trickle charge modr and also pulse mode. Think its good enough?
AP dropped another video. Woo Hoo!
Hope you enjoy
The drill going through the wall looked like it was giving your shoulder a good massage 🤣🤣🤣
🤭
Feel like I was stuck in a hole this week. I tune in on Friday to my favourite You Tuber only to find that I missed a mid week release….what a bonus! Great to see your fabrication upgrades and finally some heat for your shop. I must admit I’m cold watching you work in your shop during the winter. The heater seems to put out a decent amount of heat for such a little box. A small fan on low will distribute that heat around your shop nicely. You don’t need your shop 22 C, just 15 C would be very comfortable in your work clothes. I look forward to seeing how your heater works @ -20 C…..normal Canadian winter temperatures.
Me too. Im curious. Canr wait for that extra cold day
Great setup should keep you toasty this winter
Yup
15:40 I felt that in my left hand. Have done that plenty of times to myself😅 Luckily without breaking bones.
Yeah. Lucky
I love the sound of frustration about the stupid tree............. Great to see an actual real work video, not one that has been practiced a million times.. I have one of these heaters, They are great!
Works great and the battery setup is perfect
You can extract even a bit more heat from the exhaust duct by some DIY contraptions, like an old metal intercooler and fans(s). Seen some conversation about it around some forums.
Old radiator. Looking for one
Cool, subscribed!
Thanks for the sub!
The temp gun reading jumps because the surface isn't flat plus it's very reflective. Also the gun measures the approximate temperature of a certain area, not a small point or dot.
I just installed a commerical 15kw electric heater. it pulls 70 amps at 220v but would heat your entire shop from -4 to +20 in 30 minutes. at our KW/H prices, it costs me $2.14 per hour. i also have it thermostatically controlled. so mine kicks on for 5-10 minutes every 40 minutes to maintain the temperature. I got the heater at an auction for 300$, 0/2 3c wire for 150$ and bought a thermostat for 65$.
That's really nice to hear man, wish i had a solution like that. But there's no room in the workshop. I need to expand it :D
this is soo funny a diesel heather with a big ..........................🤣😂🤣😂😇 and safety first air quality. You make my day🤣😅😂
😅
Good luck getting the orange boxing to work there Bro..
I just ordered the same heater
cool.