This has done the Job !! I left the print head dry overnight and cleaned all the contacts, this for me was an important step. Thanks for posting this video !
Funcionando de nuevo, lo único que he añadido a tu tutorial es, después de lavarlo una buena pasada con el secador de pelo y después un algodón con un poquito de alcohol. Muchas gracias compañero por compartir.
It worked for me too! Thanks so much. Hate having to throw away things like this. One thing I'd suggest is letting the print head dry for a day before reinserting it, rather than letting it dry in the printer. Also, try putting something over the cartridge outputs to prevent them drying out while you're waiting.
Perfect! After washing and letting the printer head to dry overnight, the error kept pooping up when trying to print. I had to perform a couple of cleaning procedures and then it went on printing again. Thank you for the tip!
Bravo! Oprao glavu printera, istresao ostatke vode iz unutrašnjosti i posušio fenom. Vratio glavu, boje i uključio printer. Softverski napravio duboko čišćenje i sada se greška ne pojavljuje i printa uredno.
I followed your instructions step by step and I was a complete success. Thank you very much. You saved me a lot of money. May you always be well. Dimitris from Athens
Dear Vedran Greetings from London! Thank you so much for this video. Amazingly it worked! I would never have allowed myself to run a print head under hot running water and believed it could work. However we gave it a try and after eventually getting rid of the error message gave it 6 nozzle deep cleans before it came out clear. And it works like magic now! Well done on your green initiative to keep equipment running for as long as possible - green repair If ever you are visiting London send me an email! I owe you a drink! Warm regards Charlie H
thank you so much for your support. the printer worked after 3 hours and made a perfect test page right away. greetings from the heart of bavaria, germany. warm regards
Thanks very much. I had tried to clean printheads on an HP printer but as I thought it did not work. I was skeptical but tried it. Put the washed print heads back in and the ink cartridges and let it sit for about 2 hours and it started up and printed. Not sure how long my iP7220 will continued, has been in use for 7 years and over 4000 pages printed.
Had this exact same issue and this solution worked for me. I tried printing straight after cleaning the printer head and got same error, I had to leave it 2-3 hours after I cleaned the printer head and worked fine after.
Thanks a lot. This video helped me a lot and it allowed me to solve the problem. My printer works again and saved me an unnecessary purchase and polluting the planet for nothing
Спасибо большое! Ничего не понимая по английски, сделал всё, как на видео! Всё получилось! Сколько грязи вышло с промывкой! Canon 7250 снова в работе! Это, пиздец, как сита были "засраны", три ведра под напором струи:))) ушли... а грязь вымывалась и вымывалась. Я, использую не оригинальные чернила, но принтер стоит иногда месяцами без работы. Засох! Как был я рад, когда он заработал снова! Сначала я подумал, что надо применить и искать "утилиту", которая обнуляет работу на принтерах Epson, но мой Canon 7250 не был в долгой работе, случайно вышел на решение проблемы здесь! Support Code B200. Спасибо автору урока! Успеха в решении проблем владельцам подобной модели принтера!
After 3 hours dring outside on a sunny day it still shows error so I'm letting it dry some more. How do you run a cleaning utility if the error messages keep popping up?
funciono perfecto, hice el proceso de limpieza y volvi a instalar todo. y seguia apareciendo el error. saque nuevamente los cartuchos y puse solo los negros. inicie la impresora y luego de eso instale color. y la impresora sin errores muchas gracias. esta impresora me gusta por que los papeles se cargan en las bandejas inferiores y no puedo encontrar una similar..
On my ip7250, it will not switch on, there is no power and the left hand grey light will not illuminate. I have changed the power input cable and it is fine, ANY help and advice, would be greatly appreciated...Thank you..Gonzo.
My cartridge tray/lever (or whatever it is called) is stuck in a locked forward position and I cannot push it back, i have tried a dozen times. First, when I pushed the printer head back, it got stuck in a slanted position, and I couldn't get it out. I then removed the screws, one on each side of the cartridge tray and was very forceful to get it out, forceful towards the tray as well, as I got frustrated not being able to get it out for a long time. Hopefully I haven't broken anything. Now, I can't put the screws back on, as I don't have the magnetic screwdrivers, the size and shape of the few screwdrivers I have are not ideal, either. I tried putting them back, but looks like the distance is too long to screw them on, and they have fell multiple times into the inside of the printer and I had to shake them out :( Can I do anything to push the tray back? Everything is closed due to coronavirus and I need a printer. :(
Hm, I think by your description that you made some mechanical damage on mechanism(?) If you check on 7:43 you will notice that I didn't pull back ink cartridge on original position. I just close the tray and printer made all procedure after alone.
Preciso de ajuda, tenho a canon ip7250 e estava a imprimir quando deu um erro 1410 onde diz que o tinteiro não é reconhecido, já troquei o tinteiro e nada. Fica a piscar uma luz laranja no botão do meio onde tem a folha desenhada. O que posso fazer para resolver o problema? Não me deixa imprimir nada. Obrigado
If you don't use original/genuine Canon cartridges that can be a problem(?) Also can be a problem dirty or damaged printhead, especially pin connectors for specific cartridge. www.justanswer.co.uk/printers/9rhid-keep-getting-code-1410-warning-cyan-ink-tank.html
Until he worked ok I always was buying original cartridges. After problem show up I bought compatible replacement because I don't have money to waste. Anyhow this temporary solution isn't permanent because printer head is dying whatever You doing. Buying new printer is the next step after this.
Hello to everyone! I have an issue with this printer. When I plug it to a power source the orange light comes on and it stays on for all the time. If I press the power button it lights up but the printer appears to be death. I cant install the drivers and cant turn it off. Can someone give me a hint on this regard? Thanks!
Fatto e insieme ad un'altra procedura di apertura sportella e chiusura all'avvio, ha permesso di riprendere a funzionare. Proverò a stampare su carta fotografica per verifica finale. Ho utilizzato prima del detergente per vetri, poi sotto acqua corrente ed infine con aria compressa ho terminato la pulizia e asciugatura. Grazie
Hm, radio je neko vrijeme ok...i ko za vraga nekidan idem nešto printati i opet bacio taj B200 error.😔 Sada imam u planu ponoviti ovu proceduru, pa ako ništa ne uspije vjerovatno moram razmišljati o drugom printeru.
Evo baš sam danas ponovo oprao glavu, ali puno detaljnije i sada opet printa ok.😀 Dokle će tako ostati budemo vidjeli, ali sada sam glavu dosta dugo prao mlazom mlake (na trenutke i vruće vode) sve dok je i najmanji trag tinte bio vidljiv. Nakon toga sam još nakapao alkohola u samu glavu i ona mjesta gdje sjedaju tinte...tu je pak opet određena količina tinte izašla te opet sve ispirao u vodi. Glavu sam lagao obrisao i sve sklopio natrag te ostavio nekih sat vremena da ishlapi vlaga koje je sigurno ostalo.
@@fire2hr Nazalost, moj printer nije proradio nakon ovog "tretmana" pa sam kupio novi. U svakom slucaju, hvala na trudu ulozenom u postavljanje ovog tutoriala. Vrijedilo je barem probati :-)
Vedrane i moj printer ima taj B200 error svako toliko. u ponedeljak cu pokusati oprati glavicu pa da vidim dali ce ici, a ako ne na Amazon isti kupiti jer imam masu tinte a kod nas je tinta za njega 5 komada 9,95 ili kad imaju akciju 7,95 eura.
I tried it. But it Didn't work. But I have the ultimate solution for B200. 90% work as far as the glass sensor under your printer isnt broken. You are good to go with my by pass solution for canon Ip7240,Ip7250.
Don't work. I cannot remove and bring the cartridges to the middle manually from the side where they are parked. They are locked in the side where they are parked. AND one more thing,....the printer doesn't turn on anymore,..it doesn't get power anymore or it entered some kind of short-circuit protection,...how can I solve it?
Are you saying that just by washing the printer's print head with water, you stopped making a mistake? Why are you cheating? There are special tools for this,
How I'm cheating when procedure works ok as you see through comments? Anyhow there's no special tool for dying printhead. Only possibility is to buy new printhead or printer.
Your printhead is obviously in beyond repair state. Mine printer from this video is no longer in service. This cleaning method work twice but after some 6 months third time didn't work. This whole procedure is some kind of temporary solution.
This has done the Job !!
I left the print head dry overnight and cleaned all the contacts, this for me was an important step.
Thanks for posting this video !
Funcionando de nuevo, lo único que he añadido a tu tutorial es, después de lavarlo una buena pasada con el secador de pelo y después un algodón con un poquito de alcohol. Muchas gracias compañero por compartir.
Lo haré enseguida. Bendiciones y saludos desde Panamá.
It worked for me too! Thanks so much. Hate having to throw away things like this. One thing I'd suggest is letting the print head dry for a day before reinserting it, rather than letting it dry in the printer. Also, try putting something over the cartridge outputs to prevent them drying out while you're waiting.
Perfect! After washing and letting the printer head to dry overnight, the error kept pooping up when trying to print. I had to perform a couple of cleaning procedures and then it went on printing again. Thank you for the tip!
zahvaljujem na videu. tocno kak si rekao dok ne odstoji par sati ima gresku i onda dalje funkcionira.
Bravo! Oprao glavu printera, istresao ostatke vode iz unutrašnjosti i posušio fenom. Vratio glavu, boje i uključio printer. Softverski napravio duboko čišćenje i sada se greška ne pojavljuje i printa uredno.
Thanks this is my second printer with this fault, just over a year old, copied your advice and its now working fine.
I followed your instructions step by step and I was a complete success. Thank you very much. You saved me a lot of money. May you always be well. Dimitris from Athens
Glad it helped!👍😀
Thanks mate, it worked for me!
Dear Vedran
Greetings from London!
Thank you so much for this video.
Amazingly it worked!
I would never have allowed myself to run a print head under hot running water and believed it could work.
However we gave it a try and after eventually getting rid of the error message gave it 6 nozzle deep cleans before it came out clear.
And it works like magic now!
Well done on your green initiative to keep equipment running for as long as possible - green repair
If ever you are visiting London send me an email! I owe you a drink!
Warm regards
Charlie H
I'm glad that helped. Thanks for very kind words.🙂
But keep in mind that's temporary solution for some time.😉
thank you so much for your support. the printer worked after 3 hours and made a perfect test page right away. greetings from the heart of bavaria, germany. warm regards
It worked for me! I thought it didn't work but the waiting part is important! I waited for an hour while it is switched off and after that it worked
Thanks very much. I had tried to clean printheads on an HP printer but as I thought it did not work. I was skeptical but tried it. Put the washed print heads back in and the ink cartridges and let it sit for about 2 hours and it started up and printed. Not sure how long my iP7220 will continued, has been in use for 7 years and over 4000 pages printed.
Brilliant - take your time, follow the instructions. It worked for me first time.
Had this exact same issue and this solution worked for me. I tried printing straight after cleaning the printer head and got same error, I had to leave it 2-3 hours after I cleaned the printer head and worked fine after.
Thanks a lot. This video helped me a lot and it allowed me to solve the problem. My printer works again and saved me an unnecessary purchase and polluting the planet for nothing
Спасибо большое! Ничего не понимая по английски, сделал всё, как на видео! Всё получилось! Сколько грязи вышло с промывкой! Canon 7250 снова в работе! Это, пиздец, как сита были "засраны", три ведра под напором струи:))) ушли... а грязь вымывалась и вымывалась. Я, использую не оригинальные чернила, но принтер стоит иногда месяцами без работы. Засох! Как был я рад, когда он заработал снова! Сначала я подумал, что надо применить и искать "утилиту", которая обнуляет работу на принтерах Epson, но мой Canon 7250 не был в долгой работе, случайно вышел на решение проблемы здесь! Support Code B200. Спасибо автору урока! Успеха в решении проблем владельцам подобной модели принтера!
Ну, это здорово! Я рад, что это сработало.🙂
It's scarying but it's works.
Great job friend.
Thanks a lot
Thank you. It sorted my Pixma iP7250. Great step by step
If you press the cancel button 5s the head should move to a position where you can remove the head.
EXCELLENT tutorial...Clear and concise...Thank you.
Thank you so much for the tips!
THANK YOU SO MUCH! Its work for me after 1,5day drying!
Simple!....Well done for making this simple video. Hats Off to you sir!
amazing i was going to throw my canon ip7250 ... now it works .. thanck you very much from italy
Great!👍🙂
hello, after cleaning the printhead the printer still displays the message "the printer needs to be repaired"
what do you recommend?
Probably nothing. This procedure works maybe 2 or 3 times on dying printerhead as a temporary measure. New head cost almost as a new printer.
Was so usefull! Thank you for the tips... And works for my iP7210....
After 3 hours dring outside on a sunny day it still shows error so I'm letting it dry some more. How do you run a cleaning utility if the error messages keep popping up?
You can't. I think there's no help in this case.
funciono perfecto, hice el proceso de limpieza y volvi a instalar todo. y seguia apareciendo el error. saque nuevamente los cartuchos y puse solo los negros. inicie la impresora y luego de eso instale color. y la impresora sin errores muchas gracias. esta impresora me gusta por que los papeles se cargan en las bandejas inferiores y no puedo encontrar una similar..
Dziękuję za bardzo pomocny filmik. Moja drukarka ruszyła po wykonaniu tych czynności. SUPER!!!
Yep! Worked perfectly for me. Thanks.
It worked for a second time!
Grazie mille utilissimo. Mi hai riparato praticamente la stampante
Glad it helped!👍😀
Thank you !Excellent advice !
On my ip7250, it will not switch on, there is no power and the left hand grey light will not illuminate. I have changed the power input cable and it is fine, ANY help and advice, would be greatly appreciated...Thank you..Gonzo.
So with new power cable printer work as I understand what You wrote(?)
Worked for me, thank you so much.
Thanks was able to repair my printer
Great!
It’s work for me too thank you so much to save my time and money👍🏻👍🏻
Thank you so much it real worked
It work for me as well, thanks!
Thank you😀
My canon printer head as stive and unable pull out, how can I get to remove it
My cartridge tray/lever (or whatever it is called) is stuck in a locked forward position and I cannot push it back, i have tried a dozen times. First, when I pushed the printer head back, it got stuck in a slanted position, and I couldn't get it out. I then removed the screws, one on each side of the cartridge tray and was very forceful to get it out, forceful towards the tray as well, as I got frustrated not being able to get it out for a long time. Hopefully I haven't broken anything. Now, I can't put the screws back on, as I don't have the magnetic screwdrivers, the size and shape of the few screwdrivers I have are not ideal, either. I tried putting them back, but looks like the distance is too long to screw them on, and they have fell multiple times into the inside of the printer and I had to shake them out :( Can I do anything to push the tray back? Everything is closed due to coronavirus and I need a printer. :(
Hm, I think by your description that you made some mechanical damage on mechanism(?) If you check on 7:43 you will notice that I didn't pull back ink cartridge on original position. I just close the tray and printer made all procedure after alone.
Preciso de ajuda, tenho a canon ip7250 e estava a imprimir quando deu um erro 1410 onde diz que o tinteiro não é reconhecido, já troquei o tinteiro e nada. Fica a piscar uma luz laranja no botão do meio onde tem a folha desenhada. O que posso fazer para resolver o problema? Não me deixa imprimir nada. Obrigado
If you don't use original/genuine Canon cartridges that can be a problem(?)
Also can be a problem dirty or damaged printhead, especially pin connectors for specific cartridge.
www.justanswer.co.uk/printers/9rhid-keep-getting-code-1410-warning-cyan-ink-tank.html
Hallo, The ink carriage in the printer is not instructed for the ink cartridges in the Canon ip7250 . printer
Until he worked ok I always was buying original cartridges. After problem show up I bought compatible replacement because I don't have money to waste. Anyhow this temporary solution isn't permanent because printer head is dying whatever You doing. Buying new printer is the next step after this.
This not solv my error how yo reset the light? I know there option to press several times together button 🔘 any can help
Please my printer is ip 7240 is showing that same eroor can I use the same way too?
I think yes...practically same mechanism.
Thank you! It perfectly worked for me! :D
Thank You
Aaand it really works! Thanks!
Muchas gracias!!!! Funciona perfectamente.
It works. Thanke you. 😊
My black still doesnt work 😢😢😢
I had to leave the power on, otherwise I could not move the printer head block
Hello to everyone! I have an issue with this printer. When I plug it to a power source the orange light comes on and it stays on for all the time. If I press the power button it lights up but the printer appears to be death. I cant install the drivers and cant turn it off. Can someone give me a hint on this regard? Thanks!
Very good and well documented. Must be followed exactly as described and it will absolutely work. It saved my printer and my wallet. Thanks a lot !
didn't work for me =(
Fatto e insieme ad un'altra procedura di apertura sportella e chiusura all'avvio, ha permesso di riprendere a funzionare. Proverò a stampare su carta fotografica per verifica finale. Ho utilizzato prima del detergente per vetri, poi sotto acqua corrente ed infine con aria compressa ho terminato la pulizia e asciugatura. Grazie
What the. New. Model like that printer that use same. Ink?
Radi li jos uvijek printer? :-) Ja sam upravo zavrsio ovu proceduru i cekam da se osusi pa da isprobam hoce li raditi.
Hm, radio je neko vrijeme ok...i ko za vraga nekidan idem nešto printati i opet bacio taj B200 error.😔
Sada imam u planu ponoviti ovu proceduru, pa ako ništa ne uspije vjerovatno moram razmišljati o drugom printeru.
Evo baš sam danas ponovo oprao glavu, ali puno detaljnije i sada opet printa ok.😀
Dokle će tako ostati budemo vidjeli, ali sada sam glavu dosta dugo prao mlazom mlake (na trenutke i vruće vode) sve dok je i najmanji trag tinte bio vidljiv. Nakon toga sam još nakapao alkohola u samu glavu i ona mjesta gdje sjedaju tinte...tu je pak opet određena količina tinte izašla te opet sve ispirao u vodi. Glavu sam lagao obrisao i sve sklopio natrag te ostavio nekih sat vremena da ishlapi vlaga koje je sigurno ostalo.
@@fire2hr Nazalost, moj printer nije proradio nakon ovog "tretmana" pa sam kupio novi. U svakom slucaju, hvala na trudu ulozenom u postavljanje ovog tutoriala. Vrijedilo je barem probati :-)
@@fortissimoX Šteta...mada nisam siguran da će i ovo moje biti ok na dulje staze.
Vedrane i moj printer ima taj B200 error svako toliko. u ponedeljak cu pokusati oprati glavicu pa da vidim dali ce ici, a ako ne na Amazon isti kupiti jer imam masu tinte a kod nas je tinta za njega 5 komada 9,95 ili kad imaju akciju 7,95 eura.
Vera pogledajte moj odgovor Bass Man-u, pa vam bude pomoglo vjerovatno.
Kiedyś zadziałało, a dzisiaj już nie 😞
Огромное спасибо ! Работает.
Not work!!!
Thank you ! 😎
I tried it. But it Didn't work. But I have the ultimate solution for B200. 90% work as far as the glass sensor under your printer isnt broken. You are good to go with my by pass solution for canon Ip7240,Ip7250.
Don't work. I cannot remove and bring the cartridges to the middle manually from the side where they are parked. They are locked in the side where they are parked. AND one more thing,....the printer doesn't turn on anymore,..it doesn't get power anymore or it entered some kind of short-circuit protection,...how can I solve it?
Did You unplug the power cord and usb cable before manually moving print head to the middle(?) If yes then I think that is some mechanical issue.
Thank you. Problem solved
I clean the printer head with hot water and cover it with a paper towel its on the radiator. Now wait and see after 6 hours.
Thanks for help
It failed patern test because u rinsed it with water. It needs inkjet solution 100ml , you can buy in ebay, water or alchool damages pixels of nozle.
I followed all the explanations of the video but this doesn't help to solve the error B200...
Probably printer head is in beyond repair status. So new head or better (cheaper) new printer is option.
@@fire2hr :-(
A mí no se me arreglo 😢
hvala
Muchas gracias, se soluciono
THANKS!!!!!
It works :) Thanx :)
Ma canon refonctionne.Merci.
Perso j'ai séché la tête avec de l'air comprimé et une soufflette. On gagne le temps de séchage.
Are you saying that just by washing the printer's print head with water, you stopped making a mistake? Why are you cheating? There are special tools for this,
How I'm cheating when procedure works ok as you see through comments? Anyhow there's no special tool for dying printhead. Only possibility is to buy new printhead or printer.
Ciao, provato la stessa cosa... Non è servito a nulla. Continua a presentarsi lo stesso errore...
Then probably your print head is beyond repairing on this way.
It works!! Bravo!
Bravo!
GREAT IT WORKS!
Stephen Hawking did a great job with this, tho' it's really beneath him. 😎
This process worked well on an iP7200. Bravo!
it didn't help me :(
Sorry...
Sadly didn't work for me - thanks anyway :-/
Your printhead is obviously in beyond repair state. Mine printer from this video is no longer in service. This cleaning method work twice but after some 6 months third time didn't work. This whole procedure is some kind of temporary solution.
after cleaning the head this video helped mine - ip7250 : th-cam.com/video/keDjpGBlrOc/w-d-xo.html
thank you
Thanks a lot.