How To Replace Water Pump in 1988-1998 Chevy GMC Truck & SUV
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- In this video I go in detail on how to replace your water pump, why you need to replace it, as well as helpful information and tips on how cooling systems work, pulleys, thermostat replacement, and radiator cap replacement. I also show a trick on how to get all of the air out of your cooling system.
Buy Midwest Garage Merch: teespring.com/...
Below is a list of affiliate links to the tools I used in this video:
Water Pump: amzn.to/2Zi6TnV
Thermostat: amzn.to/2ZsvWQe
Radiator Cap: amzn.to/2L5jXTL
Torque Wrench: amzn.to/321r7Pv
Spill Free Radiator Funnel Kit: amzn.to/321blUT
Disclaimer:
Due to factors beyond the control of Midwest Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Midwest Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Midwest Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Midwest Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Midwest Garage.
FTC Disclaimer:
I am an Amazon associate. As such, I earn a percentage of sales made through Amazon associate links found in the description of my videos and on my website and other places.
I watched this video through once. Went back and made a note of the socket sizes, and the setting for the torque wrench. Then I gathered up my tools and went to work on my 98 Chevy C2500. Got the old one out in under an hour. Was losing light and had started out tired, so then I just couldn't get the second bolt started. Gave up, waited until the next day. Went out and took it back off, cleaned the bolts and gasket surfaces and put fresh ATV on, and in 40 minutes had it all back together. This was the BEST instructional video I've seen. No stupid music, no goofy effects, no extra yammering about unrelated. Good lighting, good views. I never needed to go back to refer to the video to see what to do next, because it all made sense the first time. Thank you so much, Midwest Garage!
100% did the exact same thing had to go buy a crescent and a hammer but got it done it what felt like no time just short of it being like 105 degrees outside
Great video man. Well done. Clear concise, good audio, great camera work, lighting, straight to point. Very Very helpful. Thank you!! Subscribed.
Lifesaver bro, seriously! Thank God for you
Yo bro you made this look super easy I got to change my water pump on Monday when I get the part. Thanks a lot I’ll refer to this video for my 96 Chevy tahoe
Great video. Concise and to the point. Water pump seems to be leaking 3 days after replacing radiator. LOL Now, I can R n R this too. just need it to stop raining.
Best video ever saved me time & money!
I'm not a person that works on trucks but since I have a 1994 k 1500 chevy blazer 5.7 and after watching your video I TRULY THANK I CAN FOLLOW THOSE DIRECTIONS, THANKS!
Thanks so much bro for this video!!!!
I just replaced my water pump and will be back home in time for my daughter’s graduation in Florida!!! Leaving Mississippi This week!!!!
Thanks so much!!!
I can't thank you enough for this video. Did my water pump yesterday and it wasn't that hard of a job. 👍
I knew by the dirt shirt..
That this guy knows exactly what to do.
Thank you for the video! I have to replace mine this weekend.
Honest, Hardworking..Salt of the earth!
Best video I've found. Period. Replacing my water pump on my 78 vette. It has a 350 crate engine. Only difference is it has an electric fan. I imagine the rest is pretty much the same though. Thanks again.
Great video for ladies new to auto repair. Thanks for all that you do to keep us moving!😊
You just saved me ~$100, half of my Saturday, and prevented me from having to borrow a relative's car. Good camera work with good lighting, complete instructions - including identifying tools and supplies up front - and clear vocals. Thank you!
Great job! Straight to the meat and no fluff👊
Very helpful video, well miked, no extraneous noise, good lighting, easy to follow and understand, and no BS. Thanks so much! I will keep you in mind next time I have to work on my 93 C2500.
Thank you for the kind words! I have a whole bunch of 90's Chevy pickup videos and plenty more to come, definitely keep that in mind!
@@MidwestGarage gv
Superbly done, not your typical watching someone who doesn't explain what he or she is doing. TY and keep up the great work!
I have a 1995 - GMC Suburban 454 with only 50K miles, a gem! You answered my question right away! I had just changed a hose from the power brake assist to the steering reservoir, all sat, no leaks detected. Next morning I see a spot under the passenger side and scratch my head. Crawl under and see that it is coolant dripping along the bottom hose. I knew there must be a weep hole, but I didn't see it. I watched a couple videos and I think yours was the 3rd from the top. I am going to knock this out and find a hill where I can burb it and not worry about what comes out. I appreciate you, I subscribed and will check out your vids, Wado.
the best video I've watched on this replacement. Informative with sizes of bolts that other videos slack on and good camera angles showing the process. Good job bro
New owner of a neglected 1997 K1500 5.7L Stepside. Water pump went out today. Great video. Appreciate your concise instruction and no BS filler talking. Subscribed.
Thank you for detailing each step, most helpful!👍
Great video, thanks. I like how u keep it simple and practical. For example, no need in buying a pricey strap wrench, instead use of a screwdriver. Your words are clear, easy to follow and have the necessary detail for those who aren't knowledgeable about everything mechanical and auto related. Well done, hope to see more but then again let's hope I don't have to as well😅. Ken in CO
Very helpful video thank u for the helpful information on explaining how everything comes apart to going back together very big help
One of the better vids out there for sure. Nice job walking through the process with great tips and explanations. Thank you!
Thanks a lot buddy I really used your method of repairing my water pump turn out to be great I appreciate it
This is a very detailed and thorough "How To Video", I will look to Midwest for all my future repair projects. Thanks!
Excellent. Tools and Supplies at the start and thorough walk through. Thank you. Subscribed! 👍
You are doing more and better details than a lot of people and I was just looking for 85 Cutlass Supreme Brougham water pump exchange...
Thank you for this video, went step by step on my 1996 C1500 just this afternoon replacing both water pump and thermostat. Hadn't wrenched much since spinal surgery 5yrs ago. This made my job that much easier
Great video my lower radiator hose popped due to overheating and just didnt have the money to pay for a mechanic this helped me do the entire job im proud of myself thanks so much 🙏🏾🙏🏾🙏🏾
Great video!
About to get started on changing my water pump in my 98 burb at 290,000 miles👍🏼
This video is a 10/10. It was very easy to follow step by step. Also does an amazing job of explaining how each part works together to make the water pump work correctly. I'll be subscribing, for future referencing to fix other issues that may arise. Thank you.
Hell yea!! Thank you! Clear and concise. Ready to work on my truck tomorrow. Let's hope it's half a day 😅
So many videos are junk! THIS AIN'T one of them! Great job and I need to do this same job tomorrow...really. Thanks for a super vid and all the best!!
I love your videos man, you take the time to explain stuff and having the captions of your explanation at the bottom helps a lot too. Keep it up dude! You just gained a new subscriber!
Well done tutorial....good tip on removing idler pulley....makes it much easier to access hose.
Excellent video, sir! Quick, to the point and including exactly what tools you use along with sizes is extremely helpful. No music, no BS . . . this is well done sir and I appreciate it. I subscribed and I hope that helps you out to keep doing what you're doing. I'd buy you a case of beer if I knew where to send it. LOL . . . thank you.
Just subscribed, my water pump is leaking now so I will be doing this soon and you explained it well and made it easy to follow
I've got a 99 K1500 with a 5.7L and it's coming due for a bunch of this stuff. Super glad I found your channel. Thank you!
Awesome man, I'm glad I can help out! I have a lot more coming too since my 97 is coming due for so much. Thanks for the comment and the support!
Great video. I'm a dummie and just did this on my 1500 silverado.
That's the brand of beer I would of used to do that job!
Finally a video that explains my problem
Thanks for the help. I noticed you put in something to protect the radiator and good heavy cardboard will work if you don't have wood. I don't know if you check in here but the wiper circuit board vid is how I found you. I know the links get you a little kick back but I couldn't find one. Keeping old trucks running is a good thing. Hope you are doing well, Rich in Oregon
Was very straight forward and helpful
Wsnt to say thanks much for this info . I used this to fix my wtr pump today . Grrt job & showed me exactly what to do . I appreciate you. !
Very comprehensive and step by step perfection
Hi MWG I’m looking for a video of replacing a thermostat you’ve done! Do you have one?
I know ppl say it’s easy but I’m doing this by myself & yes a women, I’ve only got interested in repair the last few years (wished I’d done this years ago) lol. Thanks and I love your vids b/c you make it seem simple and I can understand you--you have the voice for this. Thanks again ✌🏼
Nice job. Straight to the point and nice camera work. I'll get it changed soon. Thanks.
I really like the video and I'll watch it a few times to make sure I go in sequence doing the repair. Thanks
Great video.
One thing that I would do, is replace that top idler as soon as it shows any play.
I was on I-25, in the middle of nowhere between Pueblo and Colorado Springs when mine came apart. Incredibly there was a ranch exit and I got off the freeway, because as you can imagine, the engine was dead and no power steering, nothing.
Someone brought me a new unit.
So now, I carry a spare bearing and as well, an entire unit I can screw on.
That happened at about 50,000, and now I have almost 300,000 on the truck, and it's never happened again.
Of course.
Yup I actually have a video on that exact subject too!
So I should be able to do this in 17 mins from watching this video. Awesome! Thanks!
Great video thank you
Sir thank you for making this video this is exactly I’ve been looking for just to boost confidence thank you again more video please 👍🏽
Thank you for the kind words! It's been a busy winter so far but there are definitely more videos to come! I'm glad I can help!
You do the best videos. Thank you very much.
Wow !! you are so good explaining,thank you for sharing that video.First time I will change water Pump on my 1989 Blazer with a 145,000 mile that I have it for 32 years.
Great videos MWG! Thank you and keep them coming please.
Thanks! I just replaced mine using this video.
really enjoyed your video , very concise and informative. thanks
Thank u. My 88 sierra is leaking coolant along the lower hose even tho it's brand new. I'll save this vid for when i Replace it in the spring
Gettin ready to do this. And I’ll be drinkin natural light. Lol. Seems pretty easy. My truck looks like yours.
That was a great video wonderful to the point and you really know what you’re doing. I have a 1998 Chevy van and I just replace the water hose on the bottom thinking it was leaking well it wasn’t. It was the water pump so now I have to do what you did this Ohta be interesting but I think I can do it now, and I have enough tools I do refrigeration and air conditioning. Thank you very much for the videos.
Good beer and you turn the tab to the left! You won’t be chuggin that beer! Lol great video! Hopefully mine comes out as easy as yours.
very well done video, i havent worked on one of these in aot of yrs and now it is my sons first truck. Nice to have the torque specs on water pump and other simple tricks. Kept it simple and to the point not trying to over analysis a fairly simple procedure. Well done!!
This is great! Thank you for such a thorough tutorial.
Great video! Very informative and I didn't feel like you were trying to rush through the steps.
I installed a new thermostat and radiator in my 95 5.7 but it is still over heating. Tried flushing with water but truck was sitting so long that sediment back out of heater core.
Drove for 5 minutes and was almost to the red on temperature.
No coolant on passenger floor but coolant is circulating. Do you think it's a bad heater core or a bad water pump?
You ever figure out what the issue was?
Great video . Easy to follow , thank you .
Thanks my guy. I really appreciate it. I recently bought a 00 obs tahoe z71 and the radiator cracked. I was going thru everything and figured that if I’m replacing half the cooling system I might as well just replace all of it. I bought the chilton manual but for fucks sake they make everything so freaking ambiguous in there. They don’t tell you what the RTV is for.. you did (the bolts - not knowing that or why the bolts would’ve been wet and this being my first 5.7 I would’ve shit my pants thinking something was fucked), the screwdriver tip for the 4 bolts, etc. like dude. That was insanely clutch information that seriously saved my ass. You’re the man my dude. Seriously!
No RTV on two pump sealants?, great video thank you.
Great Video! Very easy to follow and appreciate bleeding method
Great video will help me a lot and change in mind already made my water pump is starting to squeak so I will change it out
What size torque wrench should I buy for this job? A 1/2 or 3/8 torque wrench. And does anyone have any suggestions for what brand is best at an affordable price?
Tell us how much time it takes cause I did it and it work but it took hours something that I didn't see in you tube video but for anything else thank you because I was gonna be charge 500 dollars right on Christmas season those 500 dollars was gonna be for mechanics Christmas presents but thank for your talent I saved 500 for my Christmas family thank you
Well done! About to do my 1994 Silverado 2500 5.7 after seeing the drips from the weep hole. May as well do belt and tensioner pulley it seems. Have you ever done valve cover gaskets, new oil pan/gasket, and filter adapter(maybe just O ring)? Getting leaks around these things, may be time.
Excellent . Easy to understand and covers all ,
Awesome video, sir. I am not mechanically declined, but I am not a mechanic. You've done a fabulous job here; my pump is weeping. That's why I subscribed. I ain't got much time before I must change it out, so I gotta ask ya...do I need any kinda rigid tubing on the top of the pump for the other hoses?
Never mind, I see my mistake after viewing this again. Thank you.
Excellent video, thanks. Greetings from Chile
Good job men well explain!! Thanks keep it up the good vibes
Is it always a good idea to flush a radiator & the fluids before you do the water pump?
THANK YOU BUDDY, IT WAS AN INTERESTING AND EDUCATIONAL VIDEO, I WILL PROCEED TO DO THE REPLACEMENT OF THE WATER PUMP IN MY GMC VANDURA, THANKS AGAIN AND HAVE AN EXCELLENT DAY !!!
ALL FUCKING CAPS BRO. I CAN HEAR YOU YELLING AT US FROM HERE. NICE FUCKING JOB.
Thank you. Question: is Busch the only beer that works for this repair, or can a substitute such as Coors or PBR be used?
Thanks for being so on point It really helps.thanks again and merry Xmas
I just installed this water pump in my '71 F250 4x4
Very good video could not be any better after seen other ones Humberto Correia
Hopefully you'll see this Great video am about to replace mine in my 92 k1500. Am having trouble finding this water pump, the 92 pump doesn't come with the two hose bungs what part number is this can anyone help
You know what? This is excellence !
Straight to the point, cool
Best I've seen yet. Great Job
Thanks. Thumbs up and subscibed. I know that was a lot of work. Great lighting, fantastic to the point, clear explanation, and great sound quality. Thanks again for the torque specs
Thank you!
Thank you for the info it was very helpful.
Thanks bro this video really helps
Awesome video. I’m ready to get’r done!
Really good video. Thank you. I appreciate it.
Great video but at what point do I need the Busch
Is that Busch part of the tool list needed for this install?
Excellent video. Thank you
Dont forget your Busch beer sold separately 🍻
I’m trying mine today!
Great video it help me to solve my son can that he is on a motorized wheelchair. The ac is not working and is doble unit. Is 97 Chevy express 1500 5.7 any help will be grateful. Sunny day from Puerto Rico Sgt Pinto USMC
What motor do you have? I just noticed your A/C is on the right and mine is on the left. Maybe I need to keep searching through more videos?
You answerd my question yes drain your fluids if you're doing your water pump
Thanks for the great video.
Thank you for this .... Subscribed