@@WordofAdviceTV you sir put my faith back into humanity. Integrity and understanding is virtue i have never seen someone in the AC Business express . Yes I said it. I have never met a honest ac man, everyone is a crook in my book. Been rip off several times and lied to about repairs being completed. Even had one guy put a nice shiny nick with his razor knife in the main cooling line as it leaves the pump.said I had a leak, fixed and charged with new coolage juice🙄. I even had a guy replace my entire system..well 90% except the hard to reach stuff, like copper cooling lines in the wall....Oh it gets better. The only thing wrong with my 20 year old system was a Capacitor had gone out in attic air handler. Now this my new found hobby to search out bad capacitors haha..🤔🤯😬
After watching your videos on capacitors last year I ordered a spare capacitor for my 22 year old air conditioner, just in case. Two weeks ago my capacitor failed on a hot humid day here in the south but I had the spare capacitor installed in about 10 minutes. The air conditioner was back up and running saving us from suffering through the heat and humidity which honestly is becoming more dangerous every year. Thank you for all your great advice and instruction, much appreciated. I'm a subscriber and a big fan of your videos.
Awesome! I love to hear that a spare capacitor was able to save the day. Way to act on that and order it last year. Thank you for sharing that, may you have a wonderful new week, stay cool!
Thanks to you I replaced my capacitor for $41 and got my A/C working before an HVAC company could even come out to look at it. 3 years ago I paid an HVAC company to replace a capacitor for $330. Thank you! Thank you! Thank you!!!!
Not defending HVAC companies, but capacitors are not the only thing that fails. Just had a home AC unit fail because the refrigerant level got too low (very small leak), and the low pressure sensor switch opened. System needs a recharge and possible leak detection procedure. I did the troubleshooting myself, but have hired a professional to do the work.
You saved me $30,000. My 5 ton had the fan wire on common for some reason and I replaced capacitor in 4 ton. Both working now. Every A/C person wanted to replace both systems.
Jay, great to hear from you . If you make a “ temporary” substitution with a different value capacitor, it would be prudent to write the correct value on the unit in case that temporary replacement was forgotten about and became permanent. This way you know what’s SUPPOSED to be there. Stay well 👍👍👍
Good move. Also, it's good to know which sections of a dual capacitor go to what. Sometimes the notations on the terminals marked Herm and Fan are rusted over. Herm is the larger number e.g. the 45 of a 45+5, and goes to the compressor ("Herm" for hermetically sealed), and the other goes to the fan. If the markings are unreadable on your old capacitor, now you know. And the common terminal is typically labeled "C."
@@PJBeee my capacitor is so rusted i had to go by the terminal number of connections took a picture of wires, but the number of terminal spade connectors is pretty standard
For my Rheem unit, I have to get the same physical size because the "barrel" is placed through a hole in the casing. Smaller or bigger won't work but the OEM unit is readily available. Could you , one day, talk about installing a surge protector for the compressor? Love these videos.
Ah yes, in that case it would be better to have the same physical size. Although I've had times before (with Rheem units) where I simply laid the capacitor on it's side and strapped it down securely. That works too. And yes! I actually have a surge protector that's been sitting around which I got specifically to make a video with. I hope to make a video on that eventually.
Jay, very glad your still handing out sage advice on electronics. Having a spare capacitor on hand is a great to be prepared in case the one is the unit goes bad. Often the fix is to just replace the bad cap with a new one.
Some modern condenser units don't have a fan capacitor. Just worked on one that has a variable speed module before the motor, and no capacitor. It appears that the speed module spits out 3-phase power from a single-phase source, the motor seems to be 3-phase (no capacitor needed), and the capacitor is just for the compressor ("Herm" + C terminals on capacitor). Many condenser units have a schematic diagram inside the access panel that gets you to the capacitor and contactor (relay-solenoid) etc. which can be very helpful.
Capacitors are like everything else; there are trusted and less-trusted brands. Polypropylene caps are self-healing as they arc through the dielectric, so brands may say they have a high dielectric voltage tolerance but are the first to fail. Bojacks are known to manufacture a more high-end after-market cap. The larger can is due to a thicker dielectric, which lowers capacitance, thus requiring more foil length, making them more electrically robust. The physically smaller capacitor achieves the same capacitance by manufacturing with a thinner (therefore more prone to failure) dielectric, which raises the capacitance ( thinner dieletic=higher capacitance). The size indicates a construction difference in the dielectric thickness.
Just spent $170 for a guy to spend 10 minutes installing a $20 capacitor. Never again. Ordering a backup and know how to do it myself next time. Thanks for the video(s)!
$170 for diagnostic and labor of a qualified tech is not even that bad. Around here in Florida, most contractors charge $300 to $600 for the service and $20 part.
Often the (Mf) rating will be printed on the motor or compressor sticker. Size does matter btw.. caps loose capacity as they age so using a 10% higher Mf is often prefered in hot climates.. higher voltage ratings means they can take the heat better; but they will be physically larger.. Use seperate caps for each motor & install a surge protector (they work ~50% of the time).. This helps "harden" your system against lightning and power surges..
Thank you, I couldn't find the exact manual for my unit, found some very close and they all said it needed a 50/5. The bad capacitor on it was 40/5. Looked on the fan/compressor to confirm it was called for a 50/5. Thanks so much for that info.
Why would someone put a 50/5 on a recommended 70/5 then? Additional it was 50/5 with a booster…. I feel like someone put the 50/5 then boosted so that way it would burn out faster. Why not just replace it with a 70/5 like the manufacturer recommended?
You really know your stuff!! Thank you so much for making these video's . My air stop blowing cold & I did a lot of trouble shooting. I think I nailed it down to a bad capacitor. The unit is 6 years old & the capacitor has never been changed. Hopefully this will get us up and running again. Capacitor is on order should have it in a day or 2. I don't have a meter so I can't test the old one. I will let you know how everything goes! Have a wonderful Day & thanks Again!!
I like your videos and always waiting to see the most recent one. The less fortunate DIY person with a bit of intelligence learns from you and save some $$ in the process. Thanks
@@Phelper99I agree. If you have a Grainger nearby, they are a great choice. This past winter, the run capacitor went out on our HVAC blower motor at around 2AM. By 7:15 that morning I was walking out the door of the local Grainger with new capacitor in hand. Before 9AM, I had the capacitor replaced and the HVAC back in business. My wife was amazed and it cost about $6.
Hi Jay, another great video. I like to point out how careful you were while you loosened up the holding strap for the capacitor and not touching the wire terminals. 😁
Thank you! Haha better safe than sorry right? I don't remember for sure but I think I did turn the power off but didn't discharge the cap, that's why I was careful.
When my AC quit working I google the most common cause. Then removed the capacitor and took it to town ask my local hardware how to get a new one. He told me where to go. I went there and they tested my capacitor. It was bad so they sold me a new one. The first one lasted 14 years.
Sorry to hear that your AC stopped working but good to know that you were able to figure out what the problem was and get it fixed yourself. Stay cool sir!
I think it's a good idea to buy a capacitor and have it as a spare. They tend to fail on the hottest day of the year and there's no average life expectancy on them so it's hard to predict when they will fail. I've seen some last over 30 years and others that didn't even make it to a year.
Last year the ac repair man came out to my house to fix my air conditioner. Come to find out, it was the fan side of the dual run capacitor. The herm side was still good. Instead of replacing the dual run capacitor, he piggy backed a small 5 ufd with the dual run capacitor. He said he ran out of dual run capacitors and all he had in his truck was the 5ufd capacitor. I got charged over $300 dollars just to replace a $10 dollar part! So now my air conditioner has two capacitors in it instead of one. Can you make a video on how it's wired? I've searched on TH-cam for this and there isn't one for this scenario. Thanks for your videos. They have helped me understand how ac units work.
Sue them! They don't have the right to charge so much for repairs, we should shut down all HVAC companies, learn from this guy and do everything for free
I encourage everyone one to scrutinize the HVAC repair man! Watch what they are doing! The one that came out to my house would not let me use his ladder to get on my roof! I had to use my own ladder to get on the roof! I could tell by his demeanor, that he was not comfortable with me watching him do his work.
Thank you for sharing your story! This will be helpful for other homeowners to know. As for your question, these two videos should be able to help: How to Wire an Air Conditioner: th-cam.com/video/KCanZEsLVEI/w-d-xo.html How to Combine or Separate Capacitors: th-cam.com/video/qLJOWU33TFo/w-d-xo.html
@@WordofAdviceTV I kinda have an idea of how it's wired, but I'm not sure. I see the brown wire on one side and another wire that must be connected to common. Either through the common side of the contactor or the common side of the dual run capacitor. This totally bypasses the fan side of the dual run capacitor.
Your overall point that other specs than factory specs may often be substituted and will work fine. Shape factors may be different (as long as the parts are secured to endure vibration of the condenser housing). Actually, you may have a point that "the voltage rating is not important" for most HVAC units in the USA and Europe, ie 360v/440v but that is not true for capacitors in general and may be very important. Rule of thumb...you can use a capacitor with a differing but close capacitance rating and you can use a capacitor with higher voltage rating but NOT LOWER voltage rating (lower voltage rating may otherwise burn out). Also, capacitors have polarity (+/-) that must be respected when installing or replacing. Overall good, helpful video, thanks.
Great Cap info Jay ... I heard the guy that stole the batteries was later '' Discharged '' in that hi voltage case You have great neighbors ... Aloha my Friend ...
Hahaha I love it! The play on words is always fun! Aloha Eddy, always appreciate you joining in for the new videos!! May God bless you in this new week!
Jay, thanks for this video! I was able to install an Amrad capacitor on our ac condenser. I would respectfully disagree with you about the brand of capacitor not mattering. I am OCD about research and it quickly became evident after reading thousands of reviews that cheap Chinese capacitors do not last much more than a year if that. Amrad capacitors seem to last at least five or more years and many are over twenty. I am all about going for quality instead of a cheap price. My 45-5 Amrad cost $36.94 with shipping from Dayton Industries in Palm Coast Florida. It was sent via usps in the manufacturer's box which was enclosed in a bubble wrap envelope. No damage like with many other sellers who slap the box in a cheap envelope that is unpadded. There may be good Chinese capacitors, but be sure to read the reviews. I'm lazy and don't care to replace my capacitor every year or less. Thanks for your great channel!
Cool. Thank you. Question: What about the + or - 5 / 6. Does that matter? For example, I am replacing a 45/5 +/- 5 with a 45/5 +/- 6. Is this OK? I understand those numbers and what they do.Which is testing the capacitor good or bad. So does replacing +/- 5 with a +/-6 matter?
I recently replaced the AC and furnace capacitors on my 9 year old 5 ton Goodman system. The original 20 mfd furnace capacitor was down to 17.8 mfd and the 70/5 mfd AC capacitor was still 69.8/4.9 mfd I kept it for spare. To my surprise the condenser fan was not connected to the capacitor…just the red wire connected to C and the yellow wire to Herm. I chose to pay a bit more and bought the U.S. made capacitors…although, I don’t know if it really matters. Also, do capacitors have a shelf life? Do they go bad even if they aren’t used? As per your advice, I also ordered a hard start kit and got it today but after watching some more TH-cam videos on that topic, I decided not to install it as long as my AC keeps starting so smoothly. No lights flickering either.
Thank you for the video!! My current capacitor says 45/4uF, but at the market sells only 45/5uF . Can i use this or should find 45/4 ? Please let me know!
It would be best to find the 45/4 but if you can't find it anywhere, then a 45/5 will have to do. It may shorten the lifespan of the fan motor a bit though.
The larger number example 35 is for the compressor. The second smaller number is for the fan. If you change your fan motor to a different option you may need to change your capacitor too.
This is where a multi tap capacitor like a Turbo 200 is worth the money. The fluid in a turbo 200 is much thicker. The best part about an AmRad capacitor is they're American made you're putting food on an American workers table.
I hear ya but things made in China or wherever still produce some jobs and income for Americans. iPhones made in china so we lose out on Americans making money from assembling them but Apple still employs Americans and American stores that sell iPhones are American companies with American employees.
Jay - I'm replacing my mechanical contactor with an Emerson SureSwitch. I traced all the wires so I know what goes where. However, the 2 wires from the crankcase heater appear not to be connected correctly, as they are connected to L2 and T2. This doesn't make sense to me and I don't know how this can possibly work. Interestingly, this 34 year old condenser unit has never been repaired, except I replaced the compressor cap last summer. Any idea why these wires are connected like that? Thanks for an Word of Advice you might have. ;-) Jeff
Love your videos. I recently had an annual maintenance on my A/C. The A/C tech said I needed to replace my capacitor. When he hooked it up to a voltmeter, he said it was 36% on one side, and 5% on the other side. He gave me a quote of $375. It seemed outrageous. After he left, I looked on Amazon and the part is under $20. Also, it only took the tech about 10 minutes to remove it and reinstall the old part. First of all, do these percentages warrant a new part? And can I get my electrician to do it (for a lot less) as opposed to an A/C company? I don't know if I'd feel comfortable doing it myself. Thanks
Very helpful video. I'm replacing both of my capacitors for my ac unit. They are both Sprague brand which no longer exist. One is 4 UF/370 VAC 60HZ. The other is 25 UF/370 VAC 60HZ. What capacitor can I use for replacement? I am coming across many with plus minus 6%. I don't know if those with plus and minus are compatible
Hi Jay, Good to see another video from you. I have a16 year old, Bryant, 3 ton, R-22 unit on which I replaced the contactor and that cured on/off every few seconds until it would finally run problem I was having with it. Prior to that trying to fix the problem, I installed a Supco hard start kit. Should I take the hard start kit off now that the real problem (the contactor) has been fixed? Thanks
Hey Jay, I just found your channel and really love the content. I'm experiencing a very odd situation with my condensing unit and was wondering if you have any suggestions. A couple of day ago I noticed the fan was turning on and off. Like it runs for 3 to 5 seconds the off for maybe 45 to 60 seconds and repeats that forever. The compressor never shut off. It will run 24-7 while the fan does its 5-60 seconds deal. I changed the run capacitor (thanks to your video) but that wasn't the problem. Any suggestions?
Thanks for your videos! I got a question. I’d like to get ac that blow very cold air like my vehicle ac 50 degrees. Is that possible and what are the implications new unit or old unit? Thanks hope you have time to answer this for me.
Great videos and education as usual. I was curious to know though would you put a hard start kit On a new condensing unit? A hard start kit came as part of the deal with the new HVAC system, but the technician said he wouldn’t put it on, if it was his system, because the capacitor that was there was so new. He suggested waiting a few years. Also, if you bought a spare capacitor, how long would it be good for? Several years, or do they age over time.? Your thoughts? This system is only one year old. Your thoughts.
What about the +_% number next to the úf numbers? Does the 5 or 6 matter? Mine is a 45+5 uf - 5% and I'm having a very hard time finding that same one. I keep finding them with 6%
Two years ago I removed the cover to find the MFD,s , ordered a spare. Would you recommend testing the original with a meter during a seasonal cleaning for a out of specifications capacitor? Is this a concern or just wait for a failure?
@Ed-dy3mh It would be good to test it but not mandatory. Checking it does not take very long and if it's weak, you will be able to prevent a breakdown ahead of time.
When my 30 year old Carrier unit developed problems like burning off the spade terminals, I bought all new capacitors and a contactor. They were much smaller than the originals. Added a Hard Start kit from Amazon, as compressor was so old. It was running without issues 7 years later when I sold the house.
In short, the start capacitor helps the unit start and then it is taken out of the circuit whereas the run capacitor is in use the whole time while the unit is running.
If you do not know this answer, you have no business working on an HVAC AC or heat pump condenser system. These are high-voltage 220/240 volt systems and the start and run windings are very important to the function. Replacing these parts are not for DIYers. This isn't like replacing your windshield wipers, this can be dangerous equipment.
Dude you're the Man! I notice all the run capacitor I see the larger number is stated first for the MFD. For instance 35/5 uf. For some reason my existing one that I need to replace, the smaller number is stated first 5/35 uf. Would it be the same? I know the larger number should be for compressor and small number should be for fan.
I was needing to replace mine and the old one has only some of the label remaining and says 10/50MFD. I ordered one that said 10/50 but now that I have received it, it says 50+10 MFD. Is this the right one? I can't seem to find 10+50MFD anywhere
Yes, it should be the right one. The larger number will always be for the compressor and the smaller number is for the fan. It does not matter in which order the numbers are.
I know you said none of the other numbers matter, but the a/c guy that came out said I also needed to match the ±6% beside the 45/7.5µF as well. So, do I need to match that number also? Or can I just match the 45/7.5µF? Thank you!
If you find one that matches all the numbers, great! 👌 But if you can't find the exact one, as long as the uf rating matches, it'll work fine. (In fact even a wrong mfd rating would work but I don't want to encourage that so I usually don't mention it)
Our AC had went out and we got a new capacitor but it’s smaller and a little thinner the uf numbers are the same and the +- number is 5 and on the new one it is 6 would it matter if we put in the new one or should we get another one?
Ive been told by several hvac people that there are better quality capacitors on the market. American made oil filled capacitors last much longer than the others so it kinda does matter what brand you purchase. What brand do you recommend?
Hello I am replacing my 35/5 capacitor & the new one has 4 leads the original had 3 leads. The extra lead on the new one is in the middle & says common. Is it okay to replace it with this?
Yes, that is okay. You might get more questions as you do this so I'd suggest watching this video where I answer 20 common capacitor questions: th-cam.com/video/ae0Ue4F3ooQ/w-d-xo.htmlsi=aE8WyleLCa9cPJOv
You don't have to guess. Look at the fan motor rating and your compressor rating. The micro farad rating for each component is on the label. The first number on the capacitor is your compressor, and the second number is your fan
I recently replaced the capacitor for my furnace blower motor. The replacement says it has the same specs but it is half the physical size of the original. Why is the new capacitor physically smaller than the original, and is it less robust because of being smaller?
It is likely of a slightly lesser quality if it is smaller but nowadays pretty much all the capacitor manufacturers make smaller sized capacitors. I wouldn't worry about it as long as the specs line up. 30-40 years ago, many of the capacitors in air conditioners were huge! Like 3 times the size of the one in my video.
THANK YOU SO MUCH. THAN I CAN INSTALL TENPORARY CAPACITOR I F I DONT HAVE TH RIGHT MICROFERS SO IF U NEED 45 fs I COULD GO 40 or 50 AT LIST FOR CUPLE DAYS AGAI THANK YOU SO MUCH
You're very welcome! Yes, it's okay to use a different size for a short time. 👍 I have seen some technicians put in a 60MFD instead of a 30MFD and it worked fine for 3 weeks until I got back there. 😅
That basically means that there are two capacitors in one. In this video I show how to combine or separate them if you're interested to know more: th-cam.com/video/qLJOWU33TFo/w-d-xo.htmlsi=UgoZ3UuOnqO3-AEY
@WordofAdviceTV I figured it out, but thanks so much for a pretty quick response. My ac went out last night, and it was starting to get miserably hot inside. Luckily, ACE Hardware had a capacitor in stock as they were the only place open today that was within a reasonable driving distance (45 minutes). Just installed it, and the house is slowly starting to cool off again. Why is it the air conditioner, heater, plumbing, etc., always seems to go out on the weekend when everything is closed, and the technicians are charging higher fees for emergency service? Lol, I put an easy start on my unit about 4 weeks ago, and I was wondering if that might be causing the problem. I was gonna change the capacitor when I was installing it but never did, and the unit is about 4 years old, so it was due for one, I suppose. I did order another capacitor and a contactor from Amazon to keep as spares in case I have problems again in the future. Sorry for the long-winded comment, but again thank you very much for responding. I wasn't too worried about being able to fix it, as a capacitor is simple to change and I'm pretty mechanically inclined, I just wanted to be sure I was buying the right part as I would have been really annoyed after driving 1.5 hours round trip just to find out I had the wrong part. This heat must've made me looney. I'll shutup now. Haha! ✌️
⬇ For reference:
20 Common Capacitor ?s Answered:
th-cam.com/video/ae0Ue4F3ooQ/w-d-xo.html
How to Replace a Capacitor:
th-cam.com/video/9ZGfvC-PMWU/w-d-xo.html
Rusted Capacitor:
th-cam.com/video/RSIi47uzApI/w-d-xo.html
How to Combine Capacitors:
th-cam.com/video/qLJOWU33TFo/w-d-xo.html
How to Check a Capacitor:
th-cam.com/video/5_0nKm940nA/w-d-xo.html
How to Discharge a Capacitor:
th-cam.com/video/45oZXnClMD0/w-d-xo.html
How/Where to Order HVAC Parts:
th-cam.com/video/faCno8-vRnw/w-d-xo.html
Different size capacitors on Amazon:
25+5 MFD Capacitor:
amzn.to/3hPXcoI
30+5 MFD Capacitor:
amzn.to/3fLsCtB
35+5 MFD Capacitor:
amzn.to/3wsvFhh
40+5 MFD Capacitor:
amzn.to/3vpEbxy
45+5 MFD Capacitor:
amzn.to/3fLu92P
50+5 MFD Capacitor:
amzn.to/2M7RFGY
55+5 MFD Capacitor:
amzn.to/3vlJ8Hk
60+5 MFD Capacitor:
amzn.to/3fGZjbH
65+5 MFD Capacitor:
amzn.to/3MkLWyq
70+5 MFD Capacitor:
amzn.to/45c0RDL
75+5 MFD Capacitor:
amzn.to/41RN2qT
80+5 MFD Capacitor:
amzn.to/3BJJ2hy
My central air blower seems to blow air weaker or not as strong as it used to. Could it be the blower motor is going or the capacitor issue? Thanks
@@WordofAdviceTV thank you. I was just to novice lol I was stuck on buying the exact replacement for efficiency, reliability, safety and quality 😅
@@WordofAdviceTV you sir put my faith back into humanity. Integrity and understanding is virtue i have never seen someone in the AC Business express . Yes I said it. I have never met a honest ac man, everyone is a crook in my book. Been rip off several times and lied to about repairs being completed. Even had one guy put a nice shiny nick with his razor knife in the main cooling line as it leaves the pump.said I had a leak, fixed and charged with new coolage juice🙄. I even had a guy replace my entire system..well 90% except the hard to reach stuff, like copper cooling lines in the wall....Oh it gets better. The only thing wrong with my 20 year old system was a Capacitor had gone out in attic air handler. Now this my new found hobby to search out bad capacitors haha..🤔🤯😬
After watching your videos on capacitors last year I ordered a spare capacitor for my 22 year old air conditioner, just in case. Two weeks ago my capacitor failed on a hot humid day here in the south but I had the spare capacitor installed in about 10 minutes. The air conditioner was back up and running saving us from suffering through the heat and humidity which honestly is becoming more dangerous every year. Thank you for all your great advice and instruction, much appreciated. I'm a subscriber and a big fan of your videos.
Awesome! I love to hear that a spare capacitor was able to save the day. Way to act on that and order it last year. Thank you for sharing that, may you have a wonderful new week, stay cool!
Depends on what brand of capacitor you bought, if you went for the cheapest priced one, you'd better stock up on several more.
Summers were worse 50 years ago, check the records
More dangerous every year 😂
@@TingTingalingy Good Lord! No, they were not! Next, are you going to claim the earth is flat?!
Thanks to you I replaced my capacitor for $41 and got my A/C working before an HVAC company could even come out to look at it. 3 years ago I paid an HVAC company to replace a capacitor for $330. Thank you! Thank you! Thank you!!!!
Not defending HVAC companies, but capacitors are not the only thing that fails. Just had a home AC unit fail because the refrigerant level got too low (very small leak), and the low pressure sensor switch opened. System needs a recharge and possible leak detection procedure. I did the troubleshooting myself, but have hired a professional to do the work.
Just fixed air con using your advice. Much gratitude to you and your work. Enjoy your jokes.
Love to hear that! Stay cool! And it's nice to know that some people actually enjoy the jokes.. 😄
You are very professional AC guy and make DIY much easie. Thank you
You're welcome my friend!
You saved me $30,000. My 5 ton had the fan wire on common for some reason and I replaced capacitor in 4 ton. Both working now. Every A/C person wanted to replace both systems.
Jay, great to hear from you .
If you make a “ temporary” substitution with a different value capacitor, it would be prudent to write the correct value on the unit in case that temporary replacement was forgotten about and became permanent. This way you know what’s SUPPOSED to be there.
Stay well 👍👍👍
Great suggestion! Thank you for pointing that out.
If you bought the cheapest priced capacitor on the market, right sized or not, good news, you won't have to worry about it becoming "permanent".
Good move. Also, it's good to know which sections of a dual capacitor go to what. Sometimes the notations on the terminals marked Herm and Fan are rusted over. Herm is the larger number e.g. the 45 of a 45+5, and goes to the compressor ("Herm" for hermetically sealed), and the other goes to the fan. If the markings are unreadable on your old capacitor, now you know. And the common terminal is typically labeled "C."
@@PJBeee my capacitor is so rusted i had to go by the terminal number of connections took a picture of wires, but the number of terminal spade connectors is pretty standard
For my Rheem unit, I have to get the same physical size because the "barrel" is placed through a hole in the casing. Smaller or bigger won't work but the OEM unit is readily available. Could you , one day, talk about installing a surge protector for the compressor? Love these videos.
Ah yes, in that case it would be better to have the same physical size. Although I've had times before (with Rheem units) where I simply laid the capacitor on it's side and strapped it down securely. That works too. And yes! I actually have a surge protector that's been sitting around which I got specifically to make a video with. I hope to make a video on that eventually.
Jay, very glad your still handing out sage advice on electronics. Having a spare capacitor on hand is a great to be prepared in case the one is the unit goes bad. Often the fix is to just replace the bad cap with a new one.
If you bought that spare el cheapo capacitor from China, never mind just in case, better buy them by the case.
Some modern condenser units don't have a fan capacitor. Just worked on one that has a variable speed module before the motor, and no capacitor. It appears that the speed module spits out 3-phase power from a single-phase source, the motor seems to be 3-phase (no capacitor needed), and the capacitor is just for the compressor ("Herm" + C terminals on capacitor).
Many condenser units have a schematic diagram inside the access panel that gets you to the capacitor and contactor (relay-solenoid) etc. which can be very helpful.
I've learned so much from these videos what a awesome teacher
Glad to hear that, thank you!
So true.
@@WordofAdviceTV thank you very much
Simple, clear, get to the point.
thanks Jay for the awesome information you have help me numerous times have a great weekend be safe
Thank you! Glad to hear that the videos have been helpful. Have a blessed new week!
You just saved me $350.00. THANK YOU !!
Thank you jay 🙏 for another great video 👍
You're welcome! Glad you liked the video!
Great info....it's easy to understand !!! Thank You !!
I used a 120V one worked great
Capacitors are like everything else; there are trusted and less-trusted brands. Polypropylene caps are self-healing as they arc through the dielectric, so brands may say they have a high dielectric voltage tolerance but are the first to fail. Bojacks are known to manufacture a more high-end after-market cap. The larger can is due to a thicker dielectric, which lowers capacitance, thus requiring more foil length, making them more electrically robust. The physically smaller capacitor achieves the same capacitance by manufacturing with a thinner (therefore more prone to failure) dielectric, which raises the capacitance ( thinner dieletic=higher capacitance). The size indicates a construction difference in the dielectric thickness.
Just spent $170 for a guy to spend 10 minutes installing a $20 capacitor. Never again. Ordering a backup and know how to do it myself next time. Thanks for the video(s)!
$170 for diagnostic and labor of a qualified tech is not even that bad. Around here in Florida, most contractors charge $300 to $600 for the service and $20 part.
Excellent, simple explanation!
Excellent videos!
Thank you! 🙂
Great advice and very clear instructions, saved me a bundle!
Very helpful video, Thanks Jay!
thank you very much young man.
You're very welcome! 🙂
Often the (Mf) rating will be printed on the motor or compressor sticker. Size does matter btw.. caps loose capacity as they age so using a 10% higher Mf is often prefered in hot climates.. higher voltage ratings means they can take the heat better; but they will be physically larger.. Use seperate caps for each motor & install a surge protector (they work ~50% of the time).. This helps "harden" your system against lightning and power surges..
Thank you for the further explanation and suggestions, much appreciated!
Thank you, I couldn't find the exact manual for my unit, found some very close and they all said it needed a 50/5. The bad capacitor on it was 40/5. Looked on the fan/compressor to confirm it was called for a 50/5. Thanks so much for that info.
Why would someone put a 50/5 on a recommended 70/5 then?
Additional it was 50/5 with a booster….
I feel like someone put the 50/5 then boosted so that way it would burn out faster.
Why not just replace it with a 70/5 like the manufacturer recommended?
You really know your stuff!! Thank you so much for making these video's . My air stop blowing cold & I did a lot of trouble shooting. I think I nailed it down to a bad capacitor. The unit is 6 years old & the capacitor has never been changed. Hopefully this will get us up and running again. Capacitor is on order should have it in a day or 2. I don't have a meter so I can't test the old one. I will let you know how everything goes! Have a wonderful Day & thanks Again!!
How did it go? I'm about to order one from Amazon today and connect it tomorrow.
Great advice and knowledge to have!
I like your videos and always waiting to see the most recent one.
The less fortunate DIY person with a bit of intelligence learns from you and save some $$ in the process.
Thanks
Thank you for this. Now where can I buy a capacitor for my ac unit?
Amazon
Grainger
@@Phelper99I agree. If you have a Grainger nearby, they are a great choice. This past winter, the run capacitor went out on our HVAC blower motor at around 2AM. By 7:15 that morning I was walking out the door of the local Grainger with new capacitor in hand. Before 9AM, I had the capacitor replaced and the HVAC back in business. My wife was amazed and it cost about $6.
@hoboken5224 You're welcome! I added a pinned comment under this video with a bunch of Amazon links to capacitors. 👍
Thanks, great info!😎
Glad you found it useful! 👍
You are always very helpful sir!
Thank you Jay great video.
You're welcome, glad you liked the video!
Great info
Excellent content
Hi Jay, another great video. I like to point out how careful you were while you loosened up the holding strap for the capacitor and not touching the wire terminals. 😁
Thank you! Haha better safe than sorry right? I don't remember for sure but I think I did turn the power off but didn't discharge the cap, that's why I was careful.
@@WordofAdviceTV Awesome work, and a great joke. Still laughing my friend. 😂 😂
Useful explanation
Helpful information, thank you for sharing bro !!
When my AC quit working I google the most common cause. Then removed the capacitor and took it to town ask my local hardware how to get a new one. He told me where to go. I went there and they tested my capacitor. It was bad so they sold me a new one. The first one lasted 14 years.
Sorry to hear that your AC stopped working but good to know that you were able to figure out what the problem was and get it fixed yourself. Stay cool sir!
how often does homeowners needs to change their capacitor? And how long does capacitor last?
I think it's a good idea to buy a capacitor and have it as a spare. They tend to fail on the hottest day of the year and there's no average life expectancy on them so it's hard to predict when they will fail. I've seen some last over 30 years and others that didn't even make it to a year.
Last year the ac repair man came out to my house to fix my air conditioner. Come to find out, it was the fan side of the dual run capacitor. The herm side was still good. Instead of replacing the dual run capacitor, he piggy backed a small 5 ufd with the dual run capacitor. He said he ran out of dual run capacitors and all he had in his truck was the 5ufd capacitor. I got charged over $300 dollars just to replace a $10 dollar part! So now my air conditioner has two capacitors in it instead of one. Can you make a video on how it's wired? I've searched on TH-cam for this and there isn't one for this scenario. Thanks for your videos. They have helped me understand how ac units work.
Sue them! They don't have the right to charge so much for repairs, we should shut down all HVAC companies, learn from this guy and do everything for free
th-cam.com/video/GhBTVn5CHBE/w-d-xo.html&feature=share8
I encourage everyone one to scrutinize the HVAC repair man! Watch what they are doing! The one that came out to my house would not let me use his ladder to get on my roof! I had to use my own ladder to get on the roof! I could tell by his demeanor, that he was not comfortable with me watching him do his work.
Thank you for sharing your story! This will be helpful for other homeowners to know. As for your question, these two videos should be able to help:
How to Wire an Air Conditioner: th-cam.com/video/KCanZEsLVEI/w-d-xo.html
How to Combine or Separate Capacitors: th-cam.com/video/qLJOWU33TFo/w-d-xo.html
@@WordofAdviceTV
I kinda have an idea of how it's wired, but I'm not sure. I see the brown wire on one side and another wire that must be connected to common. Either through the common side of the contactor or the common side of the dual run capacitor. This totally bypasses the fan side of the dual run capacitor.
Your overall point that other specs than factory specs may often be substituted and will work fine. Shape factors may be different (as long as the parts are secured to endure vibration of the condenser housing). Actually, you may have a point that "the voltage rating is not important" for most HVAC units in the USA and Europe, ie 360v/440v but that is not true for capacitors in general and may be very important. Rule of thumb...you can use a capacitor with a differing but close capacitance rating and you can use a capacitor with higher voltage rating but NOT LOWER voltage rating (lower voltage rating may otherwise burn out). Also, capacitors have polarity (+/-) that must be respected when installing or replacing. Overall good, helpful video, thanks.
Actually, since all A/C systems run on alternating currant, the capacitors do NOT have polarity.
You are great. Thanks
Thank you! 🙂
Can you make a video about soft starts and hard starts and their purpose?
Thank you for the much needed information. Can you please do a similar video with a contactor?
You're welcome! I answer most contactor questions in this video: th-cam.com/video/qHZc9wWAF4c/w-d-xo.html
You are great! Thanks!
Thank you and you're welcome! 🙂 Stay cool!
Amazing content. You are awesome
Thanks, I took a picture of my capacitor and ordered one from Amazon today for $18.00.. All I need is a screwdriver to replace it should it go bad.
Another tip: Buy an extra 1 or 2 capacitors. They are super cheap enough and you can leave them somewhere when needed.
Amen! Very good tip. 👍
I keep a set of capacitors and a contractor as well as furnace parts on hand at all times. It’s just smart, they don’t go bad.👍
@@WordofAdviceTVis aā to
😂 3:50 3:51 😮🎉😂🎉😢😮😮
Going for the cheapest ones in the marketplace brings up the old adage, "You get what you pay for."
Really great information!!
Thank you. Glad it was helpful!
Great Cap info Jay ... I heard the guy that stole the batteries was later '' Discharged '' in that hi voltage case You have great neighbors ... Aloha my Friend ...
Hahaha I love it! The play on words is always fun! Aloha Eddy, always appreciate you joining in for the new videos!! May God bless you in this new week!
Jay, thanks for this video! I was able to install an Amrad capacitor on our ac condenser. I would respectfully disagree with you about the brand of capacitor not mattering. I am OCD about research and it quickly became evident after reading thousands of reviews that cheap Chinese capacitors do not last much more than a year if that. Amrad capacitors seem to last at least five or more years and many are over twenty. I am all about going for quality instead of a cheap price. My 45-5 Amrad cost $36.94 with shipping from Dayton Industries in Palm Coast Florida. It was sent via usps in the manufacturer's box which was enclosed in a bubble wrap envelope. No damage like with many other sellers who slap the box in a cheap envelope that is unpadded. There may be good Chinese capacitors, but be sure to read the reviews. I'm lazy and don't care to replace my capacitor every year or less. Thanks for your great channel!
Cool. Thank you. Question: What about the + or - 5 / 6. Does that matter? For example, I am replacing a 45/5 +/- 5 with a 45/5 +/- 6. Is this OK? I understand those numbers and what they do.Which is testing the capacitor good or bad. So does replacing +/- 5 with a +/-6 matter?
Either 5 or 6% will both work the same. You can use either one. 👍
I recently replaced the AC and furnace capacitors on my 9 year old 5 ton Goodman system. The original 20 mfd furnace capacitor was down to 17.8 mfd and the 70/5 mfd AC capacitor was still 69.8/4.9 mfd I kept it for spare. To my surprise the condenser fan was not connected to the capacitor…just the red wire connected to C and the yellow wire to Herm. I chose to pay a bit more and bought the U.S. made capacitors…although, I don’t know if it really matters. Also, do capacitors have a shelf life? Do they go bad even if they aren’t used?
As per your advice, I also ordered a hard start kit and got it today but after watching some more TH-cam videos on that topic, I decided not to install it as long as my AC keeps starting so smoothly. No lights flickering either.
Don't worry about shelf life. Unless it is sitting in water.
Thank you for the video!!
My current capacitor says 45/4uF, but at the market sells only 45/5uF . Can i use this or should find 45/4 ? Please let me know!
It would be best to find the 45/4 but if you can't find it anywhere, then a 45/5 will have to do. It may shorten the lifespan of the fan motor a bit though.
Bojack is an American brand made in north Carolina. They are owned by another American made company. That’s why I use them.
The larger number example 35 is for the compressor. The second smaller number is for the fan. If you change your fan motor to a different option you may need to change your capacitor too.
Can you make a video that can show homeowners how to check how much Freon they have in their using gauges that they can buy from Amazon.
This video is similar to what you are asking for but keep in mind that there are different refrigerants too. th-cam.com/video/dExFtP-nXTw/w-d-xo.html
This is where a multi tap capacitor like a Turbo 200 is worth the money. The fluid in a turbo 200 is much thicker. The best part about an AmRad capacitor is they're American made you're putting food on an American workers table.
I hear ya but things made in China or wherever still produce some jobs and income for Americans. iPhones made in china so we lose out on Americans making money from assembling them but Apple still employs Americans and American stores that sell iPhones are American companies with American employees.
How do I know whether I need a start run duo capacitor or start or run capacitor for my AC? Thanks!
When replacing, does it matter which terminal the connector is put on...like which of the 4 on the common or which of the 3 on herm?
The prongs in each section are connected, so it does not matter which terminal you put it on. 👍
I was told the best thing to do is take a picture before you remove the old one and then use that as a guide for the new one.
Jay - I'm replacing my mechanical contactor with an Emerson SureSwitch. I traced all the wires so I know what goes where. However, the 2 wires from the crankcase heater appear not to be connected correctly, as they are connected to L2 and T2. This doesn't make sense to me and I don't know how this can possibly work. Interestingly, this 34 year old condenser unit has never been repaired, except I replaced the compressor cap last summer. Any idea why these wires are connected like that? Thanks for an Word of Advice you might have. ;-)
Jeff
Aack! I'm a dummy. I see how it works now. Brain fart.
Glad to hear you figured it out! Stay cool good sir!
Thank you.
You're welcome! 🙂
Thanks so much.
Love your videos. I recently had an annual maintenance on my A/C. The A/C tech said I needed to replace my capacitor. When he hooked it up to a voltmeter, he said it was 36% on one side, and 5% on the other side. He gave me a quote of $375. It seemed outrageous. After he left, I looked on Amazon and the part is under $20. Also, it only took the tech about 10 minutes to remove it and reinstall the old part. First of all, do these percentages warrant a new part? And can I get my electrician to do it (for a lot less) as opposed to an A/C company? I don't know if I'd feel comfortable doing it myself. Thanks
Very helpful video. I'm replacing both of my capacitors for my ac unit. They are both Sprague brand which no longer exist. One is 4 UF/370 VAC 60HZ. The other is 25 UF/370 VAC 60HZ. What capacitor can I use for replacement? I am coming across many with plus minus 6%. I don't know if those with plus and minus are compatible
Hi Jay, Good to see another video from you. I have a16 year old, Bryant, 3 ton, R-22 unit on which I replaced the contactor and that cured on/off every few seconds until it would finally run problem I was having with it. Prior to that trying to fix the problem, I installed a Supco hard start kit. Should I take the hard start kit off now that the real problem (the contactor) has been fixed? Thanks
Hey Jay,
I just found your channel and really love the content.
I'm experiencing a very odd situation with my condensing unit and was wondering if you have any suggestions.
A couple of day ago I noticed the fan was turning on and off.
Like it runs for 3 to 5 seconds the off for maybe 45 to 60 seconds and repeats that forever.
The compressor never shut off. It will run 24-7 while the fan does its 5-60 seconds deal.
I changed the run capacitor (thanks to your video) but that wasn't the problem.
Any suggestions?
Do you have to put the dead spider back on top for it to work?
The dead spider would be an added bonus but not mandatory. 👍
Thanks for your videos! I got a question.
I’d like to get ac that blow very cold air like my vehicle ac 50 degrees. Is that possible and what are the implications new unit or old unit? Thanks hope you have time to answer this for me.
Great videos and education as usual. I was curious to know though would you put a hard start kit On a new condensing unit? A hard start kit came as part of the deal with the new HVAC system, but the technician said he wouldn’t put it on, if it was his system, because the capacitor that was there was so new. He suggested waiting a few years. Also, if you bought a spare capacitor, how long would it be good for? Several years, or do they age over time.? Your thoughts? This system is only one year old. Your thoughts.
Hey Jay, does it Matters if the unit is a heat pump or none heat pump.
What about the +_% number next to the úf numbers? Does the 5 or 6 matter? Mine is a 45+5 uf - 5% and I'm having a very hard time finding that same one. I keep finding them with 6%
The % doesn't really matter. 6% will work good 👍
Two years ago I removed the cover to find the MFD,s , ordered a spare. Would you recommend testing the original with a meter during a seasonal cleaning for a out of specifications capacitor? Is this a concern or just wait for a failure?
I bought a capacitor testing meter from Amazon for $22. My old capacitor that was working fine was about to fail any day now.
@Ed-dy3mh It would be good to test it but not mandatory. Checking it does not take very long and if it's weak, you will be able to prevent a breakdown ahead of time.
When my 30 year old Carrier unit developed problems like burning off the spade terminals, I bought all new capacitors and a contactor. They were much smaller than the originals. Added a Hard Start kit from Amazon, as compressor was so old. It was running without issues 7 years later when I sold the house.
FROM CHICAGO THANK YOU SO MUCH FOR YOUR TIME SHOWING YOUR VIDEOS.WHAT DO YOU THINK ABOUT BETWEN HEATPUMP and FURNACE/AC CONDENSER
I'LL BE ANXIOUS FOR YOUR ANSWER AND AGAIN THANK YOU SO MUCH FROM CHICAGO
Thanks, it helped
Great video, but I have a quick question. Can I temporarily replace a 40+5 for a 40+7.5?
What is the difference between the start capacitor and the run capacitor?
In short, the start capacitor helps the unit start and then it is taken out of the circuit whereas the run capacitor is in use the whole time while the unit is running.
If you do not know this answer, you have no business working on an HVAC AC or heat pump condenser system. These are high-voltage 220/240 volt systems and the start and run windings are very important to the function. Replacing these parts are not for DIYers. This isn't like replacing your windshield wipers, this can be dangerous equipment.
Dude you're the Man! I notice all the run capacitor I see the larger number is stated first for the MFD. For instance 35/5 uf. For some reason my existing one that I need to replace, the smaller number is stated first 5/35 uf. Would it be the same? I know the larger number should be for compressor and small number should be for fan.
Excellent bro....
I was needing to replace mine and the old one has only some of the label remaining and says 10/50MFD. I ordered one that said 10/50 but now that I have received it, it says 50+10 MFD. Is this the right one? I can't seem to find 10+50MFD anywhere
Yes, it should be the right one. The larger number will always be for the compressor and the smaller number is for the fan. It does not matter in which order the numbers are.
I know you said none of the other numbers matter, but the a/c guy that came out said I also needed to match the ±6% beside the 45/7.5µF as well. So, do I need to match that number also? Or can I just match the 45/7.5µF? Thank you!
If you find one that matches all the numbers, great! 👌 But if you can't find the exact one, as long as the uf rating matches, it'll work fine. (In fact even a wrong mfd rating would work but I don't want to encourage that so I usually don't mention it)
Mine has a rating listed 5/45 uF. When searching in Amazon I'm finding 45/5 . Will it be the same thing. Is the rating listed backwards?
Same thing. The bigger reading will always be for the compressor/herm
@@WordofAdviceTV Thank You so much
i have a question maybe you can help me out. My ac unit has a 35+10 inside it and the spec at default come with a 45+5. is this going to be an issue?
Yes, long term that will damage the compressor and fan motor. I would replace it with the proper size.
Our AC had went out and we got a new capacitor but it’s smaller and a little thinner the uf numbers are the same and the +- number is 5 and on the new one it is 6 would it matter if we put in the new one or should we get another one?
That's fine. Use the one you got. 👍
Gracias Maestro!!!!
What is a good brand Capacitor? Amazon goes from $15 to $35 . I need a 45/ 5 . Are the Cheap ones just as good as the more expensive?
Usually yes. The expensive ones fail just as much as the cheap ones. Buy a USA built one if possible, that might increase the longevity.
Hi! Does the rpm on ac unit make a difference on how long ot it's performance?
i have a capacitor with 2 prongs on the fan side dose it matter if the new capacitor fan has 4 prong
That's okay, it doesn't matter. 👍
thanks
What size capacitor fits in a Goodman 16 SEER HP, 2.5 Ton > Model GSZ160301 > Appreciate the help!
Is there a difference if it says 40/5 or 40+5?
They are the same thing. Kind of like we're = we are.
@@WordofAdviceTV got it, thanks man!!
So what if on my old capacitor it states 35 + 5uf? Obviously with a backwards u, but all I could find was on ace hardware but it was 35+5mfd?
That's the same thing. MFD and uF is interchangeable.
Ive been told by several hvac people that there are better quality capacitors on the market. American made oil filled capacitors last much longer than the others so it kinda does matter what brand you purchase. What brand do you recommend?
Thanks for the help!
Hello I am replacing my 35/5 capacitor & the new one has 4 leads the original had 3 leads. The extra lead on the new one is in the middle & says common. Is it okay to replace it with this?
Yes, that is okay. You might get more questions as you do this so I'd suggest watching this video where I answer 20 common capacitor questions: th-cam.com/video/ae0Ue4F3ooQ/w-d-xo.htmlsi=aE8WyleLCa9cPJOv
I have question: 45/5 mfd 440/370V and 5/45 mfd 440/370V are the same? are they interchangeable?
Yes, they are same. The larger number will always be for the compressor/herm.
@@WordofAdviceTV Thanks for quick response. So, the voltage is not a factor to worry?
@@meoan1 Yes. 370v and 440 would both work but 440 is a little better. (can handle a local lightning strike better)
@@WordofAdviceTV Thank you
You don't have to guess. Look at the fan motor rating and your compressor rating. The micro farad rating for each component is on the label. The first number on the capacitor is your compressor, and the second number is your fan
Good advise
I recently replaced the capacitor for my furnace blower motor. The replacement says it has the same specs but it is half the physical size of the original. Why is the new capacitor physically smaller than the original, and is it less robust because of being smaller?
It is likely of a slightly lesser quality if it is smaller but nowadays pretty much all the capacitor manufacturers make smaller sized capacitors. I wouldn't worry about it as long as the specs line up. 30-40 years ago, many of the capacitors in air conditioners were huge! Like 3 times the size of the one in my video.
what is the best brand for AC capacitor
Supposedly one of the best ones is AMRAD.
THANK YOU SO MUCH. THAN I CAN INSTALL TENPORARY CAPACITOR I F I DONT HAVE TH RIGHT MICROFERS SO IF U NEED 45 fs I COULD GO 40 or 50 AT LIST FOR CUPLE DAYS AGAI THANK YOU SO MUCH
You're very welcome! Yes, it's okay to use a different size for a short time. 👍 I have seen some technicians put in a 60MFD instead of a 30MFD and it worked fine for 3 weeks until I got back there. 😅
What does duel run mean?
That basically means that there are two capacitors in one. In this video I show how to combine or separate them if you're interested to know more: th-cam.com/video/qLJOWU33TFo/w-d-xo.htmlsi=UgoZ3UuOnqO3-AEY
@WordofAdviceTV I figured it out, but thanks so much for a pretty quick response. My ac went out last night, and it was starting to get miserably hot inside. Luckily, ACE Hardware had a capacitor in stock as they were the only place open today that was within a reasonable driving distance (45 minutes). Just installed it, and the house is slowly starting to cool off again. Why is it the air conditioner, heater, plumbing, etc., always seems to go out on the weekend when everything is closed, and the technicians are charging higher fees for emergency service? Lol, I put an easy start on my unit about 4 weeks ago, and I was wondering if that might be causing the problem. I was gonna change the capacitor when I was installing it but never did, and the unit is about 4 years old, so it was due for one, I suppose. I did order another capacitor and a contactor from Amazon to keep as spares in case I have problems again in the future. Sorry for the long-winded comment, but again thank you very much for responding. I wasn't too worried about being able to fix it, as a capacitor is simple to change and I'm pretty mechanically inclined, I just wanted to be sure I was buying the right part as I would have been really annoyed after driving 1.5 hours round trip just to find out I had the wrong part. This heat must've made me looney. I'll shutup now. Haha! ✌️
Help! What size female wire connector do I need to connect to the capacitor male prong?
1/4"
Ty
Spoke to the parts company they said quarter inch. Thank you
@@WordofAdviceTVThank you so much for getting back to me.Your videos are a wonderful resource