I have a friend who's an electrical engineer, and he would install new LEDs like this for people. One of my other friends has a clear third-party SNES controller, and my engineer buddy put in a few dimmer LEDs that have a custom toggle for off, on, and oscillate. It's a neat effect.
A good way to remove the led's is to over-tin your iron with a globule of solder and put it over the led, when you bring up your iron the led will be in the glob and your pads will be clean and undamaged. However this method WILL destroy the original leds and they won't be reusable.
pro tip: The white dot near the solder pads for the LEDs show negative. If you look at the LED it notify or point to one side being green, that is also negative.
Please don't try this I did this and now its leds wouldn't turn on don't put any voltage on leds while they are still on the controller because its gonna bust out the chip that control these LEDs
I have a xbox 360 controller which is gold painted but it had black paint on the things like the a,b,y,x lt,rt, and the pad, how do i take off them? i tried doing it but its not finished
Most likely. Doing the exact same thing just with the PS3 should give you the same results, as they are quite similar controllers. I'm looking to mod my PS3 controller too, so this tutorial will be a great help.
I have a friend who's an electrical engineer, and he would install new LEDs like this for people. One of my other friends has a clear third-party SNES controller, and my engineer buddy put in a few dimmer LEDs that have a custom toggle for off, on, and oscillate. It's a neat effect.
Pale Horse So??? Nobody’s asking
There there Jay Jay, turn off the butthurt and try not to be triggered by harmless comments from people you don't know. It'll be okay.
If he doesn't charge for anything then damn you're lucky to have that kind of friend
great video. nice mod, making me think of different projects to try with those mini leds
Hi man. Just try to install transforming d-pad. I did this mod a few years ago and it's much much better than original one.
Great video, you are seriously one of my favorite youtubers
I wish you made this vid when old gen was relevant
+Addy Alam it still is according to the makers lol XD!
but the controller is 2 gud
This was still helpful
I think you mean last gen
@@kayeazikiddent7932 lol yeah now
Awesome video as always.
A good way to remove the led's is to over-tin your iron with a globule of solder and put it over the led, when you bring up your iron the led will be in the glob and your pads will be clean and undamaged. However this method WILL destroy the original leds and they won't be reusable.
pro tip:
The white dot near the solder pads for the LEDs show negative. If you look at the LED it notify or point to one side being green, that is also negative.
interesting video thanks colin..any plans on doing an xbox one controller anytime soon?
YOUR FACE IS TOO CLOSE TO THE CAMERA
anthony poltes,
And all your words are uppercase.
Shithead
Well at least he’s showing me how to re up my controllers
@@AdBlock1
th-cam.com/video/zZm5s8O8gOY/w-d-xo.html
@@zephiermonka
th-cam.com/video/zZm5s8O8gOY/w-d-xo.html
Think it would’ve looked cool with white buttons and a green A
Love your videos, do more on the Xbox 360 and ps vita!
If you don't have the right screwdriver and aren't worried about breaking something, just use an Minus screwdriver that fits
Guys if you don't have that kind of screw driver just try and break the little pin in the screw then use a flat head screw driver to remove it.
i think if you put logo of the xbox would be better and cool design
Can you make a video on how to fix a 3ds charging port/battery holder?
+Sweet Waddlez No experience on those, but what's the problem?
Just found your channel love your content! You got a new sub!
Am I the only one that JUST wants to make the LED Purple?
Do you know how to make a transparent controller?
I dont know how but I somehow ripped the middle thing in those screws so mine screws are just normal screws now :D
Please don't try this I did this and now its leds wouldn't turn on
don't put any voltage on leds while they are still on the controller because its gonna bust out the chip that control these LEDs
I have a xbox 360 controller which is gold painted but it had black paint on the things like the a,b,y,x lt,rt, and the pad, how do i take off them? i tried doing it but its not finished
I will do all white controller :D
i guess you could say you added the "fun" to "function" with this one........... okay, I'll see myself out now
U look like Jurgen Klopp
You show the hard way to change the LED
Change from green to blue
I KNOW YOU ARE A PLAYSTATION GUY
Cool mods!
Your eyes are creepin' me out cuz you're too close to the camera
Ps5 controller?
i have got wired xbox 360 controller, can i customize this?
that kinda cool
Do a PS2 and PS3 mod vid
Your name sounds like a one mobile game
Could you do this to a PS3 controller
Most likely. Doing the exact same thing just with the PS3 should give you the same results, as they are quite similar controllers. I'm looking to mod my PS3 controller too, so this tutorial will be a great help.
the problem is the ps3 controller imo is a nightmare to take apart. mainly bc of the triggers
The PS3 controller is way easier to mod imo.
Nice video
he is reading every word he is saying
Customise it again
Awesome!
Wonderful
3:11 RIP
Honestly it doesn't really look that unique it just looks like a regular Xbox controller but white with a blue ring 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Dont stay too close to camera its creepy
5:35 are there 2 times B?
He explained that
omg pls dont kill me
White man
Ok
Robbert.j.oppenhimer