The problem with these inverters (3 KVA Model) is the terrible noise the fans make when there is anything more than 4 amps of current flowing on the primary side (whether AC or DC from the photovoltaig system)! There is no temperature problem - in my testing, the inside temperature was just 2° or 3°C higher than the outside temperature at 10A current from the PV system. This seems to me to be a massive design flaw and therefore is not recommended to buy these inverters.
This is sucks, exactly the same fault just after 3 months. Both fans working. Looks like manufacturer problem as @Rudolf mentioned Thanks for the video
No need to replace fans if they are working. Just clean the tiny sensor. It is dirty so it can't (see) that the fan is spinning. Easy fix for 01 fault code IF the fans ARE spinning.
Ok I replaced my faulty fan the same as you have did but the fault code is still there. Do I need to reset the inverter in some way to remove the fault code?
Huwag mong tangalin Ang 2 fan mag fault siya mag installation 1pc para Hindi overheating Ang ng init 24v to LM7812 transistor para out niya 12v para sa fan at sa labas Ang buga sa gilid niya Yun Ang maganda
what u are talking about bro? There are inverters which shutdown immediately due to 01 error, or they just stop the system completely unless you fix the error
sorry po,ngayon ko lang nbasa,yun fan na ginamit ko ay galing sa isang unit na parehas din paralang malaman ko kung ggana.pero naghanap ako sa online wala pakong makitang kaparehas,multiple speed ung fan d pangkaraniwan
Sir meron po akong ganyan 1kva nga lang tanong ko po sir ano po posibleng sira fault 06 no ac output. Yung mosfet na malalaki sa AC side ok naman. Patulong naman po! Salamat sir
The problem with these inverters (3 KVA Model) is the terrible noise the fans make when there is anything more than 4 amps of current flowing on the primary side (whether AC or DC from the photovoltaig system)!
There is no temperature problem - in my testing, the inside temperature was just 2° or 3°C higher than the outside temperature at 10A current from the PV system.
This seems to me to be a massive design flaw and therefore is not recommended to buy these inverters.
This is sucks, exactly the same fault just after 3 months. Both fans working.
Looks like manufacturer problem as @Rudolf mentioned
Thanks for the video
No need to replace fans if they are working. Just clean the tiny sensor. It is dirty so it can't (see) that the fan is spinning. Easy fix for 01 fault code IF the fans ARE spinning.
where is that sensor?
Which one is the tiny sensor. Could you send a picture of what you mean?
What sensor
Hi I replace one fan and still code 01. Where is the tiny sensor? Thanks
Hi. Where is the tiny sensor. I replace both fans and still code 01. Thanks
Ok I replaced my faulty fan the same as you have did but the fault code is still there. Do I need to reset the inverter in some way to remove the fault code?
Interesting. Well done!
boss bumili ako ng online sa shopee pwede yung 3 wire niya at size
Good vadio sir
Thank you sir
GOOD TUTS!!!
Thankbyouuu
Huwag mong tangalin Ang 2 fan mag fault siya mag installation 1pc para Hindi overheating Ang ng init 24v to LM7812 transistor para out niya 12v para sa fan at sa labas Ang buga sa gilid niya Yun Ang maganda
I been using it, with these error for over 5 years and no problems , fans will turn on when temperature is high anyways.😀
what u are talking about bro? There are inverters which shutdown immediately due to 01 error, or they just stop the system completely unless you fix the error
maybe its because where I live we have nice weather around 70 degrees @@EnSabahNur-ir5mw
Can i use fan with different current. The original was 12v 0.7 amp i have 12v 0.3 amp. They are quieter is that ok?
what's the specification of the two fans? voltage range? AC or DC? current? form factor (Length, breadth, height)?
sorry my friend I forgot the form factor, but the fan I used is DC dual voltage from a broken inverter (same brand)
@@josetorcelino4101 is it 12 volts or 24 volts?
@@dipoajax both fan is 12V DC,
the small one is 12V 2 speed 3 wire and the big one is 12V DC 4 wires
Got a similar 1 with error 43 and its not charging battery,any idea
Bahi both fans are working but still 01 error is showing
Gud day, paano mo mapalaman kung ung maliit o malaki n Fan ang cra.
Error01
Boss good pm. san po nakakabili ng fan motor na yan
may dalawang fan po ang inverter ko. umaandar lahat upon startup pero namamatay ang isa.
I replaced the fan but still i get the 01 error
Hi. I replace both fans and still code 01. Dis you fin it?
I replaced the fan but still i get the 01 error
Is it okay if the amps of the fan are different?
boss saan mo nabili fan thanks
sorry po,ngayon ko lang nbasa,yun fan na ginamit ko ay galing sa isang unit na parehas din paralang malaman ko kung ggana.pero naghanap ako sa online wala pakong makitang kaparehas,multiple speed ung fan d pangkaraniwan
@@josetorcelino4101 akala ko boss may nabibili katulad fan nya thanks
Order ka mismo sa brand niyan
900 yata ang dalawa
Sir meron po akong ganyan 1kva nga lang tanong ko po sir ano po posibleng sira fault 06 no ac output. Yung mosfet na malalaki sa AC side ok naman. Patulong naman po! Salamat sir
Sa aking experience fault 06 ung 2 igbt defective ,try to check narin ac film capacitor bka may leak,
@@josetorcelino4101 yun pong igbt mosfet po yun na nasa AC side? Sensya na sir newbie lang po. Thnx
Yes po.
@@josetorcelino4101 maraming salamat po sir
what is tge diameter of fan
san k boss nakabili ng fan
psensyana ngayon lang nka reply, dna ako bumili,ginamit ko ung fan ng sirang 3kva kaprehas ang model