LSZ-1Premium with WorkerB; Unboxing and First Impressions
ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- Hi!
In this video, I unbox and give my initial impressions of the @SailriteDIY LSZ-1 Premium package, featuring the WorkerB Power Pack. After years of wanting an LSZ-1, I finally got pushed over the edge to buy one by the WorkerB I installed on my LS-1.
A more in-depth review of this machine and its capabilities is planned.
Spoiler alert - I LOVE this thing!
If you like what I do, you can help me to continue by purchasing merchandise from my Teespring store - teespring.com/stores/the-jaso...
Want to buy some canvas or other fabric for your next project? Check out Big Duck Canvas - th-cam.com/users/redirect?v=pD...
(AFFILIATE LINK, if you purchase using this link I will receive a small commission at no extra charge to you)
Interested in more technical fabrics? Check out Ripstop By The Roll -
ripstopbytheroll.com/?rfsn=59...
(Affiliate link, I may earn a commission from sales made through the link at no additional cost to you.)
Check out my other TH-cam channel, TheJasonWINS (When I'm Not Sewing) for videos on some of the other things I enjoy (sometimes sewing-related, often not). - / @thejasonwins3765
You can also follow me on Instagram - / thejasonofalltrades
Thanks for watching! - แนวปฏิบัติและการใช้ชีวิต
Own 30 machines, sew for money, decade of experience...... You're a professional. Great videos, thanks.
Hey, from one sewing machine freak to another: don't sweat the trolls, brother. We, your faithful viewers, deeply appreciate your honest reviews, and especially we appreciate your expression of admiration for the humble machine whether a Singer slant or a Kenmore or a Sailright. A while back, before C-19 stole an entire year, you offered to help me design a knitting case for my brother who was recovering from meningitis that left him partially paralyzed and unable to woodwork. I shied away because I did not want to be a bother, but I will never forget such generosity. In closing, God bless and keep you happy, healthy with more than enough jingle in your pocket to be comfortable.
agree... i had a youtube channel and just could not deal with the comments.. rarely post now, because even though we know they are trolls, the comments can run around ones head... I was thinking of restarting my channel, but if I ever do that.. I will NEVER read the comments until they are screened by a family member and will only respond to positive or instructive comments. I never watched my videos either, or edited them LOL..
I bought this machine and don't regret it. There are advantages and disadvantages to any machine. One learns how to deal with the disadvantages if they like the advantages well enough.
I have a commercial walking foot, a leather machine, and now this one. I like them all.
Here's the deal, the LS-1 and the LSZ-1 were designed for one thing, to sew any fabric you will find on yachts and sail boats. All fabrics from the lightest sails to the heaviest canvas can be sewn on these machines. This is the reason why they are portable and can be used with no electricity. These weren't intended to replace the industrial machine under industrial conditions. Now can you use these in the household setting, yes. The LSZ-1 can handle any household project from canvas awnings to kitchen curtains.
I don't understand why people who take their precious personal time to teach and give advice to people FOR FREE feel they need to answer to or defend themselves against angry pathetic commenters on TH-cam. You owe none of us anything. I am very grateful to be a subscriber and I have learned a lot from your videos. You were the first person I saw reviewing Sailrite and I bought an LSZ1 because of you. I have no regrets. I love it and my other sewing machines. I hope you focus on viewers and subscribers who appreciate your hard earned experience that you share so selflessly. Please, don't waste another second on idiot trolls.
I have an opinion on this machine I've never used--I want one! Thank you as always.
Sailrite is a first class company! Have used their products for years, I own a LSZ1 great machine.
I use this machine for hobby level heavy duty backpack type gear bags. My results pretty much match your findings and for many layer Cordura and webbing projects it’s been great.
Thanks Kip!
I appreciate your honesty about selecting a machine and evaluating the usefulness of its features. I am a retired 74 year old software engineer and started sewing for friends and myself about 10 years ago. I have and use 14 Singer machines and one Juki industrial machine. The all have a special use, especially the Juki. I enjoy the learning and investigative -part of trying to make something for my friends. I enjoy going into a sewing supply store. I get stares and a lot of help while I am there. i think that more men would find sewing interesting. Ir ia like woodworking with flexible materials. Oh, the best part is when a woman asks where she got her new dress and she just says "he made it". The reactions are priceless.
"Ir ia like woodworking with flexible materials." I am definitely stealing that!
Thanks for watching and commenting!
Haters gonna hate. Don’t waste your time w them. I got into sewing while recovering from some orthopedic surgery. Your videos helped more than you’ll ever know. Presented alot of Q & A that saved me many hours of frustration. Taught me some simple techniques. And encouraged me to try something new. Really appreciate the time you put into your work! Keep it up!
I have a Sailrite LSZ-1 and absolutely love this little machine. I have been thinking about getting the new motor. Still on the fence though. I know the machine isn't an industrial but I don't have room for a industrial machine in my home at the moment. So this machine works well for making my bags that I sell.
I just purchased and installed the new Worker B motor and YES it is all that he says it is! I don't think you will be disappointed if you do decide to install it on your LSZ-1.
I have a Fabricator and it’s awesome. Sailrite also has great customer service. I would love to have an LSZ-1 for mobile jobs. Thanks for your great videos!
Hi from Australia, have had my Sailrite machine for around 10 years and have nothing but great words for the machine and the company. I had the machine shipped from the USA to the West Coast of Australia just before Christmas and it arrived just after Christmas, fabulous service. Had to call Sailrite for some help, my stuff up, but they were great. My little red beauty is always reliable and any issues are usually my fault. Jason I am with you, 100% back your comments. Happy sewing. 🇦🇺😀
I love my sailrite with WorkerB! I am making and selling fleece dog onesies in my neighborhood. I've had the sailrite for over 7 years and did not like sewing on it until I bought the WorkerB.
I too would prefer to have the foot lifting lever in the back but mostly because its what I'm used to. As a kite surfing repair guy I'm often sewing rips in struts and it requires gathering the tube up behind the needle and at times there will be enough fabric to actually lift the lever up and reduce foot pressure, which causes problems. Its also happens when I've got the the entire kite stuffed under the arm. Here having the lever on the top is advantageous. A future video could be about visiting a kite repair shop and seeing what/how they do things.
Good points! Do you know a kite repair shop that might allow me to visit? 😉
(You can email me at the jason of all trades @ gmail . com
WOW, I just stumbled on this vid and cant believe it. ( I subscribed too) I have been looking at machines and was getting ready to buy this one, like as in, this week.
So you have comments from people who dont know the difference between an "Industrial" machine and a "heavy duty" machine. They should read the category description of each, so they know the difference. This machine is classified as a heavy duty, portable machine, not an industrial machine. The Sailrite 111 Fabricator, is their "industrial" model.
Yeah, Ive worked in machine shops my whole life and have a full size Bridgeport industrial milling machine in my garage. ( Im 65).
I picked this machine for all the reasons it is, what it is.
Portable, heavy duty, walking foot, adjustable stitch length both directions, the ability to have both straight and zig-zag, at the flip of a lever. Easy set up to sew bead, tunnel, or wire into edge. Has easy mounting for an edge binder attachment. Perfect machine for making small sails, sun shades, canvas covers, straps, carry bags, etc... And mostly made in the USA.
Even though it has an oscillating, not rotating hook drive, they show, this machine will sew their brand of PTFE forever thread with minimal problems. An occasional skipped stitch does not bother me. Have you tried this thread yet? Im very interested in using this type thread.
I have watched several vids on this machine and it seems to have the most features and versatile and be the best, " bang for the buck" for the beginner, like me, to make medium to heavy duty things at home or mobile.
I have not found any other machine that does, all the same things, as this one. If there is one, can some one refer it?
I cant think of anything that could be bad about this machine. I even like, the lift lever on top.
Thank you very much for your vid.
I too have a Sailrite LSZ-1 with the WorkerB. I love their videos and the fact that I can do my own repairs. No this is not an actual industrial machine but I can pick this machine up and take it with me.
I love this machine and the company.
I took a boat cover that needed some repair and a Bimini top to get windows put in it at a local shop. the two estimates I got were over $1,200 dollars. so on a mission I went, and ended up with the LSZ-1 with the regular motor. The repair material and window material was $175.00. I used to play around with my moms sewing machines as a kid sewing on patches ect. so I had some minor experience. with that said the repairs went perfect. A little touchy control wise but got it done. Then I saw the new worker B system on TH-cam. I bought the monster wheel as well. and proceeded to install the Bimini windows. This thing is absolutely made my sewing look like I've been doing it as a PROFESIONAL for twenty years the control is amazing. On a last note my son and I built a 6 man tepee out of silnylon and the seams and stitching came out perfect...so it will sew extremely thin material with ease. Just have to use smaller needle thread combo!!!!!! Moral of the story , this machine has paid for its self in less than a year!!!!!!!!!!!
Congratulations on a new machine. I hope it is everything you hope and wish . I can't wait for more on this . Thank you so much for all your time and effort with your videos.
Really helpful, thank you, cleared up a lot of queries I had about the machine
Thank you for your honest review. We appreciate it.
How fun! Congrats on a really capable and cool machine!
Thanks Stephen!
Thanks so much for this, always appreciate your opinion and the way you communicate.
you always have the coolest machines.
Jason, IMO your integrity has never been in question. I have followed you for years and, not once, have I ever doubted your views or opinions. I've learned pretty much everything I know from your channel. I wish everyone was as honest and kind as you are. You've even answered every question I posted. Many thanks for all you do. Best wishes, Mark in Colorado.
Thanks so much Mark! I hope you are doing well. It's looking possible that I will finally get back to CO for a visit next summer!
Very helpful video - thanks!
Excellent Video. I guess I have decided to go with the LSZ1 based on your video. Great job! Thanks for your efforts!
Thanks for the Singer table tip! Good to know.
Just bought the same one and now putting it together.
Right On! 👍Thanks for the Rundown Jason!
Thanks Jon!
Very educational video. Thank you.
Great video, and an accurate account of all things stated.
Thumbs up buddy.
Excellent review! I zeroed right in on the same wish for higher foot height, especially given the new realm of power provided by the upgraded motor. Still, I *must* get this package eventually. Thanks for your work.
I just upgraded my lsz-1 to the worker b motor and it is amazing. I agree with everything you said 100%. I also need to thank you Jason, your video of the ls-1 is what turned me onto buying a sailrite. I have always enjoyed your videos and when I was researching the right machine your video was the one that got me looking that direction and it ended up being the perfect machine for me.
Great video!
Keep doing what you’re doing, you have encouraged me through your videos! 6 months ago I did not even know how to sew or own a sewing machine. Now I own six machines and have become the family semster.
I'm in the same boat, down to the exact same number of sewing machines even! I went from zero to "seemster" really quickly, mostly thanks to Jason.
That's awesome, Eddie, thanks for sharing!
I just came across your video, thank you for sharing your thoughts 👍😁
I've been wanting to get one of those for a while now. I have also developed a sewing machine problem. Just picked up a Singer 206k. I originally only wanted the cabinet it was in for my 201-2, but I had to go back and bring the machine home. It's an interesting bit of gagitry. Supposedly it was the first domestic ZZ machine Singer made.
Love the breakdown video. Purchased a used LS-1 because I’m looking at learning to do auto upholstery on the hobby level for my Wagoneer project. I’ve always been one to want to learn new hands on skills and while I would’ve loved an industrial style sewing machine, as someone just getting started and with very limited space, the LS-1 was the perfect fit of quality, cost and space saving
*well I did purchase one, but the seller ghosted on me and never sent me the Sailrite…. Took me a while to get my money back. Still searching for a sewing machine to learn on
They are great! My LS1 w/worker bee and my Sailrite fabricator is amazing!!!
Yes Jason you are crazy but so am I. I have 2 lsz machines and a fabricator and enjoy them all When you made your worker b video I had to have it and have not been disappointed. Such precision!
Thanks for your videos. You are an inspiration.
Thanks Ron!
Thank you for the video I was actually looking to get one of the workerB for my cell bright and you made the decision a lot easier it would be great if you could do a video on more in-depth of the workerB thank you
Jason you described me exactly. I am a hobbyist making dog apparel on the side during the winter months. I hope I make some money eventually lol
I love the way you kill the trolls with common sense and logic….. keep it up , you have an excellent channel
Thank you so much, Patrick!
I hear you and understand. Though was not confused on your previous intent. Appreciate your care in crafting this disambiguation for those choosing to misunderstand your previous reviews.
Great and honest video, Jason! Thanks. I used to sew at my brother's awning shop. We usually used an industrial Brother machine, but it didn't have the zig-zag feature, of course. We used (and they still do) the Sailrite LSZ-1 machine for sewing the heavy binding on awnings. Great machine and you'll enjoy using it. Sailrite has wonderful customer service and a huge library of DIY videos on TH-cam. PS- I feel the same about the pressure foot lift being on top, it just takes getting used to. Btw, beautiful scenery at the end of this video.
Thanks Nancy!
End footage was from Fall Creek Falls in Tennessee, beautiful place!
Thanks for being part of the channel!
I am just getting started and wanted to thank you for all the detailed videos. It's been a great help I think I am going to get a Sailrite to start.
Thank you so much, that's awesome to hear! The Sailrite is a great place to start!
@@thejasonofalltrades Just ordered the Ultrafeed LS-Z , now the adventure really starts!!
@@lumberingbearadventuregear207 that's awesome! I was actually letting a brand new sewist use mine today, it was great seeing how easy it made the learning curve. Enjoy, and let us all know what you think when you get yours!
@@thejasonofalltrades I sure will ! If others are looking for a deal, sailrite has 15 refurbished machines available at a huge discount.
Stumbled upon your video (first time I have seen your channel) just now. It appeared in my video lineup due to my searching Sailrite videos. Having searched various machines, including the LSZ-1, Juki, Conserve, and a few other models, this video resolved my questions and ends my search. I appreciate your brutal honesty and good analysis of what and what not to expect. Thanks for sharing your knowledge, experience, and frank opinions. Now I'm off to buy the Sailrite LSZ that has been sitting in my cart at Sailrite's webstore for a few days now. I have subscribed to your site and look forward to spending time learning from your videos. Thank you so much?
Thanks, I'm glad you found the channel!
As I was driving out to buy a late model LSZ-1 with WorkerB and Monster 2 from a Craigslist ad, you posted this video. What a coincidence!
There's already a WorkerB on Craigslist?!? WOW!
I just ordered one, I’ve been thinking about getting one for several years. There have been several instances where I could have used it. I hope it doesn’t take long to arrive. Thanks!
Hi Jason, I just wanted to drop a note to thank you for all the great videos you put out especially the ones on sewing and the Sailrite machines in particular. I enjoy your videos and appreciate your ethics. They've been very helpful, I placed my order today. : - )
Congratulations :) Enjoy!
@@thejasonofalltrades Hi Jason, my machine is coming (should be here tomorrow) with a roll of white v92 thread. Do you mind if I ask what are the most common colors you use? I'll only be sewing outdoor gear like you and I'm brand new to sewing so I have lots to learn. I thought about ordering a roll of black but wondered if there is also another color I should consider adding to my order. I've heard you say you use mostly v69 thread. Do you think I should also get some in that size too or stick with the v92? I'll mainly be sewing canvas. Again thank you so much for all your great content, I've learned a ton from watching your videos!
@@Tim_Pollock Hi Tim,
My reasoning for primarily using V69 is versatility. V69 is generally considered to be the heaviest thread one should use in most domestic/household sewing machines, and it is thin enough that I can get away with sewing thinner materials with it (although it is NOT ideal). I can use it whether I'm using the Ultrafeed, one of my industrials or one of my vintage domestics. I often find myself going from machine to machine on a project, so that's a big convenience for me.
For example, say I want an interior pocket out of a thinner ripstop, but the body of the bag is 1000D Cordura, and I want the same color thread for both. V69 lets me do both, so I don't have to have multiple sizes of thread in the same color.
V92 is great for some of the heavier materials I use, but I really don't notice any difference unless I'm topstitching, and that difference is pretty minimal.
In terms of color, I have two HUGE cones of black V69 that are always on at least one of my machines. When I'm assembling something and the stitches aren't visible, that's pretty much what I'm using. I have quite a few smaller cones of various colors that I use for visible topstitching when I want to either match or contrast what I'm sewing. A general rule of thumb is you can get away with less-accurate stitching when you have a thread that matches the fabric; using contrasting thread looks great but demands greater attention to detail. Admittedly, I will sometimes use whatever is in the machine, depending on the size or importance of the project.
The Thread Exchange is the site I usually buy thread from, they have a great selection and a VERY informative website.
I hope that helps, keep me posted when you get your machine, and thanks for being part of the channel!
@@thejasonofalltrades Thank you so much Jason for taking the time to respond and for all the helpful tips and advice. It is greatly appreciated. Will do sir, I'm super excited to get it. I've been using my wife's brother domestic machine to learn on but it has struggled some when sewing multiple layers of canvas.
@@thejasonofalltrades Hey Jason, hope you're doing well. I got my new LSZ-1 in today. I'm going to try to send you an email, I hope that's OK so I can share some photos with you.
Thanks!
Tim
I just received my LSZ-1 and finished assembling it and setting it up. I am impressed with it. It's exactly as described. They did add the molded cord retainer on the belt cover which I thought was cool since you mentioned it in your video. I also bought the industrial table to go with it which should be arriving today. Thanks for posting your experiences with it. That played a big part in my decision in buying it. I wanted zig zag function too which clenched the deal. Thanks again👍
That's awesome, let me know what you make with it! I know you'll love it, I have way too many machines but I always love making stuff on my Ultrafeeds!
Just confirmed I'd like one of these machine when I can find the spare money to invest in it. I always liked the Sailrite Channel and judge a company on how they support potential customers and potential customers like me with all sorts of useful tip and ideas. Their videos are there to help and guide those of us learning and I've found them tremendously helpful for all sorts of projects. I haven doubt their machines will be every bit as good as you and other's say and if I need customer service, I expect they will be very helpful when I need them.
Hi Jason,
Thanks for the review.
I'm leaving a comment to let you know what was my first reaction when I saw the thumbnail. I thought : yes, yes another sailrite he got from to promote the LSZ1 with workerB.
So I passed at first, but then I watched because I couldn't help it 😁. I really like your channel.
I'm happy I did and when you explained that you actually bought the machine my actitud changed completely.
I thought many people probably felt the same way and that you probably would be happy to know.
SO, WELL DONE.
Take care, Carlos
Thank you Carlos, that's great information! I need to change the title of the video :)
Hi Jason. Really appreciate you. I started sewing because I wanted to make a boat cover. I bought the LS. Worked great and now it’s one of my favorite hobbies. I bought a fabricator and I really like it. A few years ago I gave my LS to one of my sons. After a while I realized that I really missed the portability of the LS so I just bought the latest LZ. I have a home and a cabin and there are many times I want to make things at the cabin so now I’m happy. One thing that really impressed me when I bought my first Sailrite is the customer support. If I had any issues they’d work with me until the problem was resolved. They even sent me links to well made detailed videos walking me through the process. Based on my experience with them they clearly are stuck with me as a satisfied customer. And thank you. Mike
I just purchased the Workerb system myself just have to install it once it get here. I know a knee lift and presser foot lever and a longer bridge and what not would be nice but we do have to remember this is a “portable” walking foot machine otherwise it would be super large and heavier like the industrials. I love this machine for what it is and it’s size
Years ago I adjusted some screws on my machine to increase presser-foot clearance and also travel of the walking foot. I now need to reassess adjustment but have forgotten the method.
I think your videos are very helpful. I just got my blue machine and i'm using it for bag making personal use. I have a fairly new Bernina and the last bag i made was thick enought that when i used the hand wheel to go over a thick part the wheel came off in my hand. Didn't know i had broken off 2 nubs on the inside. Also i boogered up something just in front of the needle. So decided this machine was a lot heavier and more suited for bags. I'm excited and love your videos. Unless you have tried one of these machines don't bad mouth it!!
I have had a LZ-1 and just did the upgrade to the worker Bee. Head over tails improvement. That power assist is awesome with the control needed. I am a small part time manufacturer of specialty gear. Multiple layers of Cordura, mil-spec nylon webbing, foam assemblies. Only recommendation I tell folks is take off the tensioning knob and use a vernier depth gauge and measure the post to knob height. Keep those measurements so that you can repeatedly comeback to different tensions depending on what your sewing.
That's a cool idea using the depth gauge! I'm more of a "go by feel" guy, but that's a smart way to get repeatable results, thanks for sharing!
@@thejasonofalltrades @Jason Samara Well, my method is to measure the thread tensions by a simple $1.5 spring dynamometer. I keep some records of thread tensions at bobbin thread and needle thread for some fabrics, threads, and needles, so I normally do not need much test sewing before I am right on for a project. But yes, I guess when you are more experienced, it is faster "by feel".
I'm only half way through this.... THANK YOU. I am researching a heavier machine than I have ever owned, super novice here, I've been contemplating this commitment for years now, I keep coming back to sailrite. Your blunt honesty is what I needed to pull the trigger on this machine, again, keep it up, your knowledge and transparency is greatly appreciated. P.S. don't sweat the Idiots.
Sailrite is a stand up company which provide excellent customer service, videos. And products.
After making do with home machines for 30 years I finally took the plunge today and purchased this same machine.
Really looking forward to my first project: sofa cushions for my van.
Free shipping on all orders for Black Friday.
Congratulations! Let us know how your project goes!
Good evening,
I just got to this video and am thankful you made it. I've had my Sailrite LSZ-1 now for oh, maybe 13-14 years now and have maybe, at most, about 10-20 hours on it. I have no where near used this machine to its full potential, not even close. I try and have fun with it while attempting projects/repairs/alterations but, I get frustrated at times 'cause it's not doing what I want. I'm having a problem with tension right now. I'm using a 22 needle and some Sunbrella and for the life of me, I can't get the tension correct so the bottom stitching looks identical to the top. The bottom still shows the knot. I cannot get the knot to end up in the middle of the upper and bottom stitching.
I know in the manual, it refers to the use of the V-92 as the heaviest thread to use but, in the same manual, it states that you can use a 22 needle too. And a 22 is what's needed for V-138 thread. Hmmmm. So, anyway, I really like the machine. I just have to master it. Thanks again for your video. Always inspiring to watch someone use one of these machines. They really don't seem to be that well known in the sewing world.
Hi! It sounds like you are using V138 thread when you are having this issue? Coincidentally, I will be publishing a video in the next week or so in which I use V138 in my Ultrafeed. From that limited experience, I think that V-138, in general, is too much thread for these machines. I think you can get away with it, possibly depending on other variables like what fabric you are sewing, how many layers, etc. In my case, I was sewing tubular webbing, and I was able to get "acceptable-to-me" results by putting a different wrap on the three-hole upper thread guide, cranking the upper tension down as tight as I could, and reducing bobbin case tension. It still isn't good enough, and I wouldn't use it on something I was sewing for someone else, but for the project I did it sufficed. As you point out, I think V-92 is the thickest thread Sailrite recommends for the Ultrafeed.
I hope that helps, thanks for watching!
Jason,
I assume that's your name. I sincerely want to thank you for getting back to me on this. Yes, I should have mentioned I'm trying to use the V-138 and a 22 needle in my Ultra feed. I have used it a few times and, just like you, one of the times was on tubular webbing and had what I consider, great results. But, tubular webbing, especially the Nylon stuff, is a funny animal. Sew one direction and you see all the stitching perfect. Sew the other direction and, in some cases, the stitching DISSAPPEARS! That's the nature of the beast in those circumstances.
The material I'm trying to sew is Sunbrella. I don't know the oz. weight. And as far as how many layers, two to start with. Then in my experimentation, I fold it over and then once more. All the results are the same, a visible knot on the bottom. I have ran the tension knob all the way in and loosened the bobbin tension to the point the screw almost falls out and am barely getting better results.
I have watched Matt Grant (and others) on the Sailrite website sew blue Sunbrella with either the Ultrafeed machine (LSZ) or the Fabricator with what *appears* to be white V-138 thread. It (the thread) looks, at least on camera, to be much thicker than the V-92. But, they for the part, do not say what thread they're using in many of their demos.
Anyway, sorry for the long reply. I really appreciate you working with me here.
SR
Thanks for an honest and insightful review. I don’t own an LSZ 1, it appears to be an excellent machine for what it is. However, When I do pull the trigger on my next machine, for a few $$ more I’ll spring for the 206 rb.
If an industrial machine suits your needs, the 206 should be great, I love mine!
I LOVE my LSZ-1 Sailrite machine. I do not have the Power B motor, but I do have the Monster wheel. I want the Power B motor for mine.
Thank you for this video and your honest comments. I've been wanting to upgrade to a semi-industrial for my "just starting out bag making business", and I've been hemming and hawing between the HD Brother, Juki and Janome HD9. I love what I have researched and seen (like your video) about the Sailrite LSZ-1 - I'm just trying to find a dealer in Canada.
I was looking at a Janome HD9 at a sewing expo a few months ago, I wish I had a chance to take it for a spin.
I will tell you that, in my experience, if you're making bags out of anything but the lightest of materials, you will eventually want a walking-foot machine. Used industrial walking-foot machines can sometimes be had for about the price of the HD9 (possibly less!).
Good luck, and let us know when you are up and running, I'd love to see what you are making!
Thank you for doing this review. I need a new machine and have looked at the Sail many times. I have a Singer 95-10 and am going to change out the clutch for a servo motor but will save up for the Consew. Mostly sewing denim and canvas on a regular basis.
I’m using a 1931 95-40 with a consew CSM 100 servo motor. I changed the pulley on the motor to a smaller one, the control is excellent. I’ve been sewing Sunbrella canvas with it and it’s adequate, but I’d like to find a 111w155 or an older consew 206 Rb.
@@edge1289 Thank you for letting me know. I'm going to go for it. In addition to the denim, I need it to handle upholstery as well. I'll likely change the belt as well. Need to get the pulley too.
I have just become aware of Sailrite and their sewing machines. I found your video to be extremely helpful and forthright as I contemplate what to buy as a new seamster. TY!
Thanks Scott! And with your surname you have to have at least one Singer machine in your collection!
Haha Jason! I just watched your Singer 20/1200 video and I am officially in the vintage Singer rabbit hole....the hunt has begun!
My mom was a professional seamstress. I bought a Sailrite to do upholstry on my boat. She said it is an amazing machine. I have enjoyed this machine and have now done 3 boats and it is perfect!!
If you want a clip on the end they sell stick on clips in many stores. Looks like a great machine.
Great idea! Thanks!
Just discovered your channel, after ordering a WorkerB motor for my LSZ.
Got to looking at your other videos, and lo, we have alot of the same interests. Except you know how to do them!
Looking forward to learning from you.
My biggest mental hurdle right now is how to pattern something. I might try your paper idea before cutting any Sunbrella.
Welcome to the channel!
I hadn't seen you on you tube lately. People are crazy.
Thank you for a good video about this product, and I like your well-founded evaluations towards industrial sewing machines. I got less experience than you, but all what you say here fits. Typically the industrial machines got more harp space right of the needle, and I think many users do consider that to be important. I should like someone to measure the distance here for the LSZ-1 or LS1, so I could compare it to some of my own machines.
The Ultrafeed has about 7" of harp space. My Consew 206 has about 10" of harp space. When I worked in marine canvas, there were certainly assemblies I sewed on an industrial machine that would be very challenging, maybe impossible, to sew on an Ultrafeed due to the reduced harp space, but I rarely encounter an issue with the kinds of sewing I do. There are ways to work around that limitation, but if one is sewing really large assemblies, it would definitely be something to consider!
Thanks for watching and commenting!
I just installed the worker b on my Lsz 1 with the monster wheel and have alot of control
there is a cam on the main shaft of the machine(thats the shaft inside the arm and it is left of the elbow. if you lossen it, rotate it counter clockwise as if looking at the handwheel,, it can take a sudden forward before backward moition out of the outer feed dog.
I named mine "kaboom" the blue drako.
🤺💐
Thank You!
Late to this but the carbon pile foot pedal offers the same control. WORKER BEE solved every issue of control I had. The Ultrafeeds are portable on boat repair tool. I needed a heavy zig zag for bartacks and bought this over the fabricator. Only thing I wish this machine could have is a industrial sized bobbin.
Great video with clear, concise and appropriate discussion. I upgraded to the compact table and servo motor a few months ago and love it. The smaller table just works better in my small space. I keep my LS-1 on the enclosed porch I built, adjacent to the travel trailer I live in. The worker B motor looks like a great upgrade but for my purposes I think the compact table and servo motor serve me better. I still insider it as portable as the table easily fits in the back seat of my truck and I remove the machine and put it in the carry case I built that is similar to the sailrite case but I made mine a little heavier by using 1/2" plywood. You probably remember that I made 2 of the cases as I sent you photos and we talked via email. I also think your discussion of a sailrite LS-1 or LSZ-1 is not a full industrial machine but rather fills a need for a lot of people who may not need a full size industrial machine. I'm one of those. I have considered an industrial machine but my space is very limited and the Sailrite does almost everything I need in a machine for heavier fabrics and now leather with the servo motor. I only have 3 machines. One being the singer rocketeer that has been in my family since the late 60s. I also found an old singer 15 clone at my aunts house and got it running great. Recently I travelled to colorado from Nebraska and my baby brother needed some repair to a Sitka backpack that one of his dogs chewed on a little. He called me and asked me to bring my machine to repair the backpack for him. I had a pretty full load and didnt want to bring my LS-! with the table for just a few minutes sewing. Several of the repairs were on the webbing such as the sternum strap that had been destroyed. So I brought the old singer close and hoped that I would be able to make the repairs with it. Part of using any tool is knowing its limitation as well as methods to get more out of the tool. The clone didnt have enough power to drive the needle through the webbing just by using the power pedal. But...If you started the needle by turning the crank it would then continue just fine. I was able to make the repairs with no issue. I spend most of my time working in my wood shop and sewing is just a hobby. My woodworking is also mow a hobby even though I do sell a lot of products that I make, and most of that is on the lathe. I have also made a little money by sewing for others but I limit what I do. As an example a lot of people know that I have been a carpenter and cabinet maker most of my adult life and I often get asked to make things for others. My normal answer is that I no longer take on those kind of jobs. Once you take on a commissioned project for others you have certain obligations to those people and I just dont want to put myself in that position. I would rather simply go out to the shop and make things that I think are fun to make and then if somebody likes them and wants to buy it thats great but I dont take on that obligation. I particularly liked and appreciated your comments on some of the negative comments of others regarding the Sailrite machines. The sailrite machine is definitely a huge step up from a standard homeowner model sewing machine and it has the added benefit of being fully mechanical rather than electronic, and Sailrite sells all the replacement parts you will every need. But as with any type of more heavy duty tool they will require maintenance and potentially some repair. I compare it to owning any type of tool that needs to be lubed and adjusted often, which includes woodworking tools such as jointers, planers, table saws, band saw, lathes, and other equipment such as tractors, loaders, combines, etc. I reference those tools as they are often used by me and several of them require some maintenance daily. That is one of the common complaints I read from folks complaining about the Sailrite. I have read several that have stated that they bought a domestic machine and have had to do no maintenance on it other than a few drops of oil on occasion. That is likely true but one needs to keep in mind that domestic and homeowner tools are designed to not require any maintenance and just thrown away when something breaks. With a Sailrite you will be able to repair and return it to service for almost any problem that occurs. I read a few comments this last week with some people who were not even comfortable oiling their own sailrite and part of that was simply because the top and side cover needed to be removed and they were not comfortable with doing that. I tried to be kind with my comments but my opinion is that if you use more heavy duty tools you need to become comfortable with providing maintenance on those tools.
Item last. How would you compare the function of the Worker B a s the servo motor. I am very impressed with the servo motor and compact table and really like the treadle pedal on the compact table.
Thanks Howard, good stuff!
Regarding the WorkerB vs servo, not having the treadle pedal is maybe the only negative, and it is a VERY slight negative for me. Otherwise, the power and speed are more than enough, and the slow-speed control is on whole different level. If you are happy with your machine in the compact table and NEVER want to use it as a portable, it may not warrant changing (unless you need that slow-speed awesome control), but if you EVER use the machine as a portable, it's a game-changer.
I hope that helps, thanks for watching and commenting!
@@thejasonofalltrades Thank you both. I was about to ask the same as Howard, and now I see Jasons answer and evaluation. I have seen a lot of videos of sewing machines using servo motors, but I do not have one myself yet. And when I look at their performance, I get exactly this feeling of lagging low speed control. I guess most leatherworkers have used a clutch motor, and when they get a servo motor, they experience much better control, and do not imagine, that the control can be even better. But human practice can however also help overcome these problems. I am however a bit surprised that some of the manufacturers of servo motors do not make some extra design effort, to make the low speed control even better. I have seen some specifications for Efka servo motors, that indicate better control, but their price level is about 10 times higher - like $1200 each. Durkopp Adler use them on some of their modern industrial machines.
i was able to get the zigzag width to 5.8mm with needle position to the right, and zigzag width opened all the way with that little lever-stopper undone/slid out of the way for max width.
there was a place on the casting under the bed by the rods comming out of the bottom of the throat where i could see a rod banging the side of the casting at 5.0+. i took a dremel with a small lolipop bit and removed a little bit of where it rubs and now i dont need the the stopper on the width at all.
its a ok machine, a good machine. its feeding much better lately too.
I bought the conversion kit for my LSZ-1 a few weeks ago and am really enjoying it. Finish wise, I REALLY like how they streamlined the wire management because mine lives in the case ever since I bought the Fabricator. That AC connector and hardwired pedal was a real bummer to deal with.
In the process of converting it, I opened up the control box, it looks like a 90 volt PWM circuit at first glance but I'm not 100% sure. I'm seriously considering adding a lighting circuit for that u-shaped above needle light, possibly just manufacturing that add on as well, not sure if I'm going to tap the AC side and just so a small SMPS to drive the low voltage for the lighting or tap the 90vdc side to dc-dc down to the voltage I need. I've found that far more useful than the bendable light on the side, and it's all I need/less to store in the box.
I envy your knowledge of electronics. I can't even put the fuse back in without breaking it lol!
Good description being it's suitable for a hobbiest but it's not an industrial to run for hours at a time. No different to lots of other tools where the industrial differs a lot from the domestic market. Ignore the haters as they are always there. I enjoy your style and it has certainly got me trying new things. Sticking with my domestic Janome HD 3000 equivalent for now as it works for me.
I have yet to find an accurate word or medical diagnosis(lol) that describes individuals like yourself and many others (me included) who have a fascination for sewing machines and collect them just for fun. I'm not a professional sewer, but I do enjoy sewing and crafting. I also enjoy fixing, refurbishing, and re-selling them. I think Sailrite has a good business model for the hobbyist market and hands-down is best in quality control and customer service. Not the for the budget minded. I think they are with the Baby Lock or Berninas of the domestics. Keep up the fresh content Jason. Been a fan since you featured that vintage Singer 1200, the "Unicorn". Still have it? I'm still on the lookout, hoping one shows up at my local thrift shop.
Thanks!
I don't know a good term for those of us suffering the affliction of hoarding sewing machines, either. Sometimes I wish they were way more expensive so I would be less tempted. I like old cars a lot, but I can't afford to keep 30-something of those around!
I do still have the 1200, and it gets used, although not as often. I've contemplated moving it to my shop so I'll have more opportunities to use it, since I do most of my sewing at work now. I've seen a surprising number of them available over the last few years, none close enough or cheap enough for me to pull the trigger on. Keep looking, and good luck!
I have had mine for over 10 years, I recently upgraded it to the Worker B system, I have done many of the other "upgrades" over the years. I also have the Monster II wheel, with the Worker B and the Monster II, the machine is a beast to sew with. You don't really need the Monster II, but, it's nice to have. I use it on leather all the time without issue.
I think you are dead-on accurate about people "confusing" this with an industrial machine, it's not, don't even think it is one.
Carrying case, that's funny...buy a folding hand truck for it when you take it with you.
I'm thinking about the worker B also. Your correct about the folding hand truck.
Oh, was also seeing if you had any videos of you on your 201.
I have quite a few videos using my 201s. My recent "terrible tent" video uses my refinished 201 exclusively.
Hey, great video. I’ve been really going back and forth between the LS and LSZ. I am a hobbyist making bags, camping gear, etc… trying to determine if it’s worth the LSZ for bar tacking or if it’s not necessary.
Thanks!
In my opinion, the difference in cost is so little, I would definitely go for the LSZ-1. You can definitely get by without zig-zag, but if you EVER need it and don't have it, you'll regret not spending the extra $200.
That said, if you already have a machine that does zig-zag that you know works for the materials you use most, $200 is $200.
For me, it's worth the extra money. When you have a machine that does zig-zag, you will find reasons to use it. To me, it's better to have that capability than to have to improvise or compromise because I don't have it.
Honestly, you're likely to be very happy either way you go! Let me know which you decide on!
Thanks for the comment, yeah better to have and not need than need and not have as the saying goes!
I was really leaning towards a sailrite, but I ended up finding a Consew 226R1 very well maintained with servo motor locally!
You’re a wonderful craftsman with integrity. Sorry for people being insensitive.
Thank you so much!
Que bonito es tener una máquina de coser algun día yo tendré la mía
Thank you. Just watched your presentation. I'm wondering between a machine for upholstery indoor and out and this seems a new option I was never aware of. I'm a home sewer hobbyist - any suggestions?
Hi!
The LSZ-1 is a solid choice for what you are wanting to do. The only challenge might be the throat space if you're sewing large items. Sailrite makes a full-size industrial machine called the Fabricator that might be worth a look if that's the case.
If you have space for a full-size machine and don't need portability, used walking-foot industrials like my Consew 206 are also a good option.
This video goes into some detail on the topic of choosing a machine, you might find some helpful info in it -
th-cam.com/video/fFq5QXgF4v8/w-d-xo.html
Thanks for watching and good luck!
How loud is this newer version compared to the other model you reviewed ~5 years ago? Is the Worker B motor quieter? Thank you! Awesome review!
Thanks Jeff!
The WorkerB makes a huge difference in the loudness. I think I covered that in my video introducing the WorkerB motor that I installed on my LS1 (the machine I reviewed all those years ago), but it's noticeable quieter.
Thanks for watching and commenting!
Hey Jason thanks for the video. How does the workerb stack up against the servo motor? In regards to slow speed control and precision?
In my experience, the WorkerB is capable of better slow-speed control and torque than any industrial servo motor I've used. It is truly impressive!
Jason, you don't need to address anything that you do. Your always open and honest about things and the haters will always hate. Keep on making great videos, love what you do and how you do it 🙂
Thanks Myck!
Really appreciate this video. I watched your other video about how loud your other ultrafeed is. Is this one with the WorkerB any quieter? These machines look awesome, but the noise is a concern for me.
The WorkerB changes the machine completely in terms of noise. There is still a little more "clatter" from the walking-foot mechanism, but it is nowhere near as loud as with the standard motor. I think Sailrite now only sells them with the WorkerB, which I think only makes sense, there is NO reason to have one with a standard motor now.
I hope that helps, thanks for the question, and thanks for watching!
@@thejasonofalltrades that's fantastic news. Watched your WorkerB video this morning and am now even more excited about eventually picking up an Ultrafeed LS to upgrade my Janome HD-5000. I still have plenty of learning left to do with the Janome, but now I can put the Ultrafeed on my wishlist and stop wasting time wondering what's next. ;)
Good investment 👌
I have a Sailright Fabricator with the Servo motor and knee lift. I love it, but now I have Osteoarthritis, and I have a lot of pain in my knee when I use the knee lift. I'm thinking about selling my Fabricator and buying a LSZ-1 with the WorkerB. I do not do production or professional sewing.
Sorry to hear that Peggy! The LSZ-1 is pretty great, although if you otherwise love your Fabricator, you could just use the regular presser foot lever on the machine head, or possibly make it work with a foot pedal instead of a knee lever. I hope you find the right solution for you to keep sewing!
Great video I have one and I think it’s fantastic I made my boat cover and other things on my boat. I had no trouble at all with it I think it’s built solid and always worked great and they have many videos on TH-cam to explain how to do everything with it I think the company is a very honest reputable company and when I order things little things there’s fast service the websites easy to use and I say thumbs up and like I say I am an interior finish carpenter I’m 65 years old but I had my boat out in the yard I wound up saying hey I’m gonna buy the machine I wanna make it myself I’m going to do additional things with some upholstery things I watched a lot of videos of people who do a lot of leather work and other things but for what I need it for it’s working 100% all the time and I have nothing negative to say about it I think it’s great and like I said I am an interior finish carpenter that was determined to make my own boat cover I repair some of my seats I made some additional things and is just seemed interesting to me and I was getting into it learning this field.
I've grown to like the $80 "chinese hand crank walking foot "cobbler machine on ebay. lol.. This little thing is pretty cool.. So if there's something that a regular cheapo machine won't do -- this thing will get me through the thick stuff.
Cool. What do you sew with it? I am learning how to assemble insulated bags. Thanks
I know I’m late to your video, but I appreciate your straightforwardness… do you think the machine would work on stretchy knits than can get very thick (but need a walking foot), say such as faux furs?
Hi!
I don't have any experience with those sorts of fabrics, sorry! I'd suggest checking with Sailrite to see how they suggest dealing with stretchy fabrics with the Ultrafeed. I have no doubt it can do it, but they'll be able to tell you how.
Thanks for the question, and thanks for watching!
Jason, thanks for the review. One question, does it seem like the WorkerB motor package can be adapted to an external motor household sewing machine? Some thing like a vintage Neechi or Singer 201-3?
Thanks
Hi Keith,
With sufficient fabrication skills/tools and willingness to possibly have to drill and tap holes in the body of your machine, I believe it would be possible to mount the WorkerB to a vintage domestic machine. I have definitely considered doing it to one of my 201s.
The motor is quite a bit more powerful than the motor that a vintage domestic was equipped with, so I would recommend caution, but most of the pre-1970s machines are built well enough that I think they would be just fine. The speed control would be very nice, I think.
I think the trickiest bit would be getting the alignment between the drive pulley on the motor and the hand wheel on the machine correct. (201-2s present the additional hurdle of not being belt driven, so there is no pulley on the hand wheel to receive the belt. I believe wheels from some other vintage Singers can be used on 201s, but I don't know for sure.)
It's definitely a project idea that is on my radar, I just need to find the time for it. If I do, you'll see it here! And let us know if you get to it first!
@@thejasonofalltrades Jason, thanks for the reply. I guess I'll just have to order a WorkerB motor to play with. My 201 has the external motor and Hand wheel with the pully grove. I'll have to find a different pully for the motor as I believe it currently uses a cog belt. Ah well, It's only money! LOL. Have a great day.
Good investment
Hey there!
By the way I love your videos!
I am wanting to get a walking foot sewing machine. I would love to have an industrial machine but right now I just don't have the space. I am wanting to sew recycled bicycle tubes and coffee bags into bags and wallets. Do you think this machine would do the trick or would you recommend a different one?
Thank you SEW much!
Laura
Hi Laura,
I cannot recommend this machine highly enough. Particularly if you can afford the WorkerB motor, that thing is a game changer! (Full disclosure, while I am not affiliated with Sailrite, I have received free stuff from them in the past, so take my opinion with a grain of salt. That said, I paid full price for this machine out of my own pocket.)
I have a couple of industrial walking-foot machines as well, and I've never encountered anything I can sew with those machines that the Sailrite couldn't handle just as well.
I hope that helps, thanks for watching!
@@thejasonofalltrades thank you so much!
It's so funny, I work at a bike shop and got fed up with the amount of waste so I found you on You tube while looking for ways to sew bicycle tubes. Then you said "if you do this type of work often then I highly recommend getting walking foot sewing machine."
Here after doing a ton of research I found one that I thought would work... (Reliable BARRACUDA Zig Zag) and when I ordered it the company emailed me back and said "I don't think this machine will work on bicycle tubes." So I went back to doing more research and here we are!! I found you again!
Thank you SO SO much!
If you ever come to Canada (Kelowna BC or Halifax Nova Scotia) know you have friends here . I ow you a beer or a coffee some something!