Just did this (minus the connecting piece on the front) in twenty minutes. Nearby dealership quoted me for over 350 for two hours. Thank you for your knowledgeable content!
mine didn't have the connector as mine is a basic without the keyless entry, but it took about 3 min to put on the door handle and cover over key entry ! The estimate was $100 ish just labor at the dealer. I did get my parts at the dealer as I wanted my key to fit and color to match. Thank you TRQ!
Thank you very much for the video. I came home from work yesterday to the door handle from my daughter's 2014 Camry sitting on the kitchen table. I thought I was going to have to take off the inner door card, but this looks way easier. Thanks
Thx for the vid. worked out great took no more then 5 mins. the worst part was pulling the handle trigger to line up with the handle. found some random lawn trimmer twine in the street (Philly) and it worked perfectly. thx again!
MAKE SURE THAT YOU KNOW WHETHER YOU HAVE A CONNECTOR BECAUSE I THOUGHT MINE FELL IN THE DOOR. ( I didn’t even have one in the first place so I took off my interior door without needing to.
Thanks for this. 20 mins was all I needed for my 2012 Camry. No connector as well, so made it super easy. Just had to slide it in & ensure the back of the handle engaged with a release lever. In the door. Took me a bit to get that right but it finally worked
Thank you very much- It worked just as advertised! To get a color-matched handle I ended up at Toyota, was $ 91 for the handle. A thin piece of string did the job of lifting that latch up while installing the handle. Will keep an eye out for more of your content!
Great vid. Only thing to add...when you put the key cylinder back in,that rod end has to line up with a small receiver in the door...it doesn't always do it automatically. Body shop couldn't figure it out, tried to tell me I needed a new cylinder until I googled it....
great video, my dads car had this issue. said the door handle just broke when he was opening it. I bought the handle from amazon and ima see if I can do it in under five minutes. thank you!
Any thoughts as to why my bolt for the lock driven with the T30 driver will not screw back in? I have replaced the handle successfully and was putting everything back together but that part will not thread.
I had no idea how to do this before watching this video. I dreaded having to disassemble the door car then have to disassemble a multitude of bits inside the door like most cars are like to do. Great design ! Thanks for the video !
What is that plug that the exterior door handle is plugged into? Mine is missing, and it should unlock when I grab the door handle but doesn’t. Also my BSM system is malfunctioning on my driver side.
My 2013 Camry didn't have the connectors. I removed the door panel and searched inside door. Found another video in which that Camry also didn't have connecters. I got an actual mechanic to look at it. He discovered my handle somehow connects into something near the keyhole area. With door panel off, we placed door handle in place, he pushed something inside door panel to door handle and...it works now.
I had the handle replaced but dealership gave me the wrong door cover part. Can it just be popped on from the outside or will it have to be pulled out like in the video to be put on?
Update: You need to unscrew that T30 screw MOST of the way. Ive been trying to pry it off my door for 30 minutes until i watched another video. At least on mine, i unscrewed it like that and it has teeth that keep the screw in place even when its loose. Anybody else having issues pulling the cover piece off? In the video he simply pulled it out and mine is not budging even with a screwdriver and force. Im not sure what im doing wrong.
I guess this video depends on the model? Definitely doesn’t apply to all Camrys in that year make. I have a 2012 SE. There was/is no interior connection that faces the aft of the car. So. I wasted an hour taking everything apart. Thumbs down on this video for that reason.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Just did this (minus the connecting piece on the front) in twenty minutes. Nearby dealership quoted me for over 350 for two hours. Thank you for your knowledgeable content!
mine didn't have the connector as mine is a basic without the keyless entry, but it took about 3 min to put on the door handle and cover over key entry ! The estimate was $100 ish just labor at the dealer. I did get my parts at the dealer as I wanted my key to fit and color to match. Thank you TRQ!
I said a prayer after I watched this video. Thank you so much for posting! This may be the only front door handle removal for a G3 on TH-cam.
My 2012 Camry LE didn’t have a connector which made it much easier! Took seriously like three minutes. Thanks a ton!
Thank you very much for the video. I came home from work yesterday to the door handle from my daughter's 2014 Camry sitting on the kitchen table. I thought I was going to have to take off the inner door card, but this looks way easier. Thanks
Thx for the vid. worked out great took no more then 5 mins. the worst part was pulling the handle trigger to line up with the handle. found some random lawn trimmer twine in the street (Philly) and it worked perfectly. thx again!
Just used your instructions, took me more time to find the T-30 bit than to replace the handle. Thanks for posting 😊
Thanks for that! We used your video and installed it in 15 minutes! You rock! 😁
+@bryanspires1114 Thanks for watching our video! 1aau.to/m/Shop-TRQ
thank you for this. I was able to complete the job because of this video.
MAKE SURE THAT YOU KNOW WHETHER YOU HAVE A CONNECTOR BECAUSE I THOUGHT MINE FELL IN THE DOOR. ( I didn’t even have one in the first place so I took off my interior door without needing to.
+@miguelchicanotitan6497 Thanks for the feedback! 1aau.to/m/Shop-TRQ
TRQ gave me a much cheaper door handle and a DIY video. What more can I ask for? I sure saved a lot of money. Thank you TRQ!
Thanks for this. 20 mins was all I needed for my 2012 Camry. No connector as well, so made it super easy. Just had to slide it in & ensure the back of the handle engaged with a release lever. In the door. Took me a bit to get that right but it finally worked
Thank you very much- It worked just as advertised! To get a color-matched handle I ended up at Toyota, was $ 91 for the handle.
A thin piece of string did the job of lifting that latch up while installing the handle. Will keep an eye out for more of your content!
Super helpful. I like that the video gets straight to it. Def will utilize TRQ for similar assistance moving forward. Thanks!
Great vid. Only thing to add...when you put the key cylinder back in,that rod end has to line up with a small receiver in the door...it doesn't always do it automatically. Body shop couldn't figure it out, tried to tell me I needed a new cylinder until I googled it....
great video, my dads car had this issue. said the door handle just broke when he was opening it. I bought the handle from amazon and ima see if I can do it in under five minutes. thank you!
Any thoughts as to why my bolt for the lock driven with the T30 driver will not screw back in? I have replaced the handle successfully and was putting everything back together but that part will not thread.
Toyota will charge you 199.99 for that
My 2016 SE doesn’t have that connector. I took my door panel apart thinking it fell inside. What model is this video on?
I had no idea how to do this before watching this video. I dreaded having to disassemble the door car then have to disassemble a multitude of bits inside the door like most cars are like to do.
Great design !
Thanks for the video !
Holy sh that was easy. I put it off for two weeks. It took me longer to find the t30 than to swap them out.
Do you have a video for the rear doors?
Thanks for the video....easy 5-10 minute job thanks to you
What is that plug that the exterior door handle is plugged into? Mine is missing, and it should unlock when I grab the door handle but doesn’t. Also my BSM system is malfunctioning on my driver side.
Worked well for my Toyota Vellfire 2017 Drivers door handle - thank you 🙂
How much will it cost to get the door handle painted?
My 2013 Camry didn't have the connectors. I removed the door panel and searched inside door. Found another video in which that Camry also didn't have connecters. I got an actual mechanic to look at it. He discovered my handle somehow connects into something near the keyhole area. With door panel off, we placed door handle in place, he pushed something inside door panel to door handle and...it works now.
Does this work on a 2018 Toyota Camry LE
I had the handle replaced but dealership gave me the wrong door cover part. Can it just be popped on from the outside or will it have to be pulled out like in the video to be put on?
What’s that tool called , the one he used to grab a hold of that switch
Thank you for the video. I did it myself
My 2012 Camry had no connector on that drivers door handle.
Update: You need to unscrew that T30 screw MOST of the way. Ive been trying to pry it off my door for 30 minutes until i watched another video. At least on mine, i unscrewed it like that and it has teeth that keep the screw in place even when its loose.
Anybody else having issues pulling the cover piece off? In the video he simply pulled it out and mine is not budging even with a screwdriver and force. Im not sure what im doing wrong.
2012 camry does not have a connecter
Hi, would this work for 2010 Lexus ES350 too? Thank you.
good video gracias I subscribed
Is back door the same?
do you need to take the interior door panel off?
What’s the cover called that you popped off in the beginning? I need a part number
+Shrugs Thanks for watching. We do not carry the door panel trim you are referring to.
I have just broken my 3rd handle on my Camry 😢
What is that Black lever called? 1:36
+@jakebrown7183 This is the lever that helps to open and close the door handle.
commuter deluxe 2023 is this work
Thank you sm my Handel broke off after 370000 miles of use one my 2012
+@jordanwareware5052 Thanks for the feedback! 1aau.to/m/Shop-TRQ
WHAT MODEL AND WHAT YEAR IS THAT
Do you have one for Toyata Avalon 2013?
+@r.a.z.o2849 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
Thank you😅
Thank you.
+@dorvilierolivier5950 Thanks for watching our video! 1aau.to/m/Shop-TRQ
A body shop quoted me over 850 to replace two of these 😂
How about the rear handle?
+@Ken42908 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
Well I be. Was able to change out my handle in 5 minutes.
Как найти артикул ручка камри50
I still can’t do it! Grrr
My handle isn't there anymore. I got hit by a deer and next time i tried to open the door i almost fell on my ass handle came right off 😅
+Daniel Thanks for watching our video! 1aau.to/m/Shop-TRQ
Black lever, do not pull the silver bar. You will be in a world of hurt
I guess this video depends on the model? Definitely doesn’t apply to all Camrys in that year make. I have a 2012 SE. There was/is no interior connection that faces the aft of the car. So. I wasted an hour taking everything apart. Thumbs down on this video for that reason.
Mines just fell off 🥲🥲🥲🥲and I was browsing to find a video on how to put another on when I can get one… thank you!!!
+@cassandrahappyfranks1498 Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ