ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Pelican Gun Case Foam Preparation Tutorial - OpticsPlanet Inc.
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2024
- Optics Planet Inc. hunting guru, Steve Ledin has driven, flown and carried his hunting gear with him on trips all over the world and now shares his knowledge of packing Pelican gun cases with you to help you prepare for your next hunting excursion. This tutorial will show you how to properly cut the foam inserts for your Pelican Storm case and how to properly arrange your equipment inside to insure that your gear remains secure and undamaged. We hope you find this video tutorial informative and we wish you the best of luck on your next hunt!
The Pelican Storm 3300 Case in this video is as well as dozens of other outstanding Pelican gun cases are available at OpticsPlanet.com:
Pelican Storm 3300:
www.opticsplane...
More Pelican Gun Cases:
www.opticsplane...
Gear up NOW with OpticsPlanet!
bit.ly/opticspl...
Interested in parts, accessories, cleaning & maintenance guides for the AR-15? We got it all at OpticsPlanet.com check it out below!
AR-15 Parts: bit.ly/opticspl...
AR-15 Accessories: bit.ly/opticspl...
AR-15 Cleaning Guide: bit.ly/opticspl...
Make sure to subscribe for more How To Videos from Opticsplanet.com
![ออกพรรษาน้ำตาหล่น - แอน อรดี [OFFICIAL MV]](http://i.ytimg.com/vi/PFZtOcY9ONA/mqdefault.jpg)
Try using chalk instead of a marker to avoid leaving permanent marks on your foam.
My brain exploded when he suggested saving your scraps so you could use them as a base for another gun setup. Seriously, I'm now sitting here drooling on myself. This will work very well for my Rifle Dynamics AKM and my future GA precision build. BRAVO!
f you have a Pelican case, just replace the last digit of the model with a “1”. For example, the 1750 Case uses 1751 Foam:
Pelican 1751 Original 3 PC Replacement Foam Set for Pelican Case 1750 (use our web-site search)
This was really helpful. I just bought my first pelican case for a favorite rifle of mine. Thank you so much for posting this! By the way, sweet trophy room!
Love the electric knife trick. Wouldn’t you want your scope facing up towards the case handle so the rifle takes the weight when some idiot plops it on the ground instead of your scope? Just my ocd thinking.
Thank you. Great tutorial on cutting the foam and layout. I have a single and double case and have been procrastinating on cutting them, not wanting to screw it up. TY!
This was excellent. Looks like the electric knife is the way to go for cutting foam. Thanks for posting! Saved me a BUNCH of headache, time, and crappy looking cases.
Great question, and the answer is YES, but not in a case with such firm cut out structure like in the Storm or Pelican cases. In other cases, or in the case of using a soft case for your gun like the OPMOD double gun case, or the new OPMOD Waterproof MRS (Modular Sporting Rifle) case that I'll be using in Alaska next week instead of the middle piece of foam, yes. The foam cut out for a gun is so secure, that it really does not matter how the gun is positioned. Thanks for watching & the question!
i wish i could say this without sounding like a jerk but this is one of the best videos I have seen! I am glad I have seen this video. This hunter should be proud! He was thoughtful and precise. it shows he has years of experience. I am going to use this for photography.
thanks for the tutorial! i've now used a cheapo electric carving knife (about $15 @ bed, bath and beyond) to cut the foam in both my 1750 and 1720 pelican cases. worked like a dream.
For sure, an electric knife is a MUST on foam. Agreed! Nice job.
@ascetic43 Glad you found this video helpful young grasshopper. Thank you for watching.
What a fantastic tutorial. It was exactly what I was looking for. I would have NEVER thought about using an electric carving knife, but it makes perfect sense. So does the serial number up. Why not cut down on the time spent with TSA. Steve is a fantastic Instructor. Slow and concise. Keep him teaching on TH-cam Optics Planet. Thanks for all the great information Steve.
Pelican Cases are the best cases you can buy! Milatary tested. Hunter/Marksman Approved!
@95coolcar No problem, thank you for watching.
You should glue the top foam to the bottom with spray mount. This will prevent the foam from shifting and adds additional stability.
@justice2576 It's a pretty easy knife to handle. If it's your first time we would recommend practicing on something so you get a feel for the knife before going away at the foam. Thanks for watching!
Outstanding information well presented. But....enjoy TSA?
I agree this guy is efficient and helpful.... Why isn't everyone like this?
Great tutorial! I'm not a hunter but just bought my first pelican for my camera gear but had no idea how to cut the foam, I was about to use a razor blade. Glad I saw this tutorial first! Great idea about the electrical carving knife!
haha i was looking for the best way to cut acoustic foam. that is such an ingenious idea to use the turkey cutter. i would have never thought. good video btw. Thanks
Informative video. I had a choice of either a Pelican or SKB case. I chose SKB bc it's stronger, lighter, better wheels, rubber handles, better latches and has a $1500 coverage warranty if an airline damages your equipment. Still made in the USA!
It's cheap on Amazon amzn.to/1o2tsTr
I don't own any guns, but have a number of Pelican cases. Excellent video.
@APhelps91 Hi there! We linked to the Pelican Storm 3300 (the one Steve uses in the video) and more storm cases in different sizes and colors in the description box. We tried to post it here for your convenience, but sadly TH-cam wouldn't allow it. Hope this helps!
Scope should be toward the handle, not the hinges.
Thanks for your comment and watching! Glad we could help and if there is anything else we can do please feel free to continue commenting.
Thank you for the kind words.
Thank you for this wonderful tutorial, my good man.
Thank! Hope you will enjoy it. If you have any questions, don't hesitate to ask!
Great job on the video. Now I know I won't butcher my Pelican case. Thank you
Good tips, esp. putting extras under the egg crate foam. Nice job!
@paraguitarmedic That's great, we're happy you found it helpful for your next set up!
Great, tips, thanks for taking the time to show us how to do it right the FIRST time!
this is one the best videos I've seen
Great - tip on the carving knife is really good. Thanks
I bought one of these for my daisy red rider, works great!
i did this method and i need to tell you thank you for makeing this vedio for me to see thank you it was sooooo much easier
Excellent presentation! Well prepared and executed.
Great vid
I did it! Its not pretty but for a first time try it looks good to me. Thank you for the video!
Awesome vid been wanting to do this for an electronics case but didn't know how to cut the foam other than with a stanly knife. Great tip with the electric carving knife
Fantastic video! Very professional and very straight forward. Thank you sir!
You can use a water soluble caulk marker so you don’t have to flip nor keep perfectly perpendicular.
OK, Good video, if you can always guarantee that every baggage handler is going to roll that thing on it's wheels. Not going to happen. Every one of them is going to pick it up by the hand grip, and toss it to the next spot: the cart, the conveyor, and the guy in the cargo hold stowing stuff is going to do the same. I NEVER put a scoped gun inside with the scope to the hinges The wight of the rifle hammering the scope, every time it is dropped. Even when first picked up by the grip, by the owner to place it on the exam place, the weight of the rifle comes down on that expensive scope (remember the advice to pay more for your scope than your rifle?) That weight on the bell end (Objective end) will torque it at the narrow part. Great. No wonder the Professional Hunter insists on sighing shots on arrival. I put the scope toward the hand grip of the case. and I wedge some of the material I took out, into hard points to keep the scope from banging on the foam above it, no matter how hard the case is thrown. Never had a scope come out of zero, when we do sighting shots at the hunt.
Steve uses a regular serrated blade which he says works very well on the foam.
If you turn the two rifles so that the grips are facing each other, with the barrels pointing in opposite directions, you should be able to accomplish that - I hope that makes sense.
Very well done. You've got style.
thats pretty cool ima try this u make it look easy
Thanks for sharing your video, oh i like the photo of the Goshawk.
You did a great job on that! Well done!
Hi Jeremiah,
Thanks so much for the comment! It is much appreciated.
I've never had anyone check the serial number on any of my firearms and I've been flying with firearms since the late 80's.
Great demonstration. I'm about to get a 1600 for a (taken down) stg-556, and I was worried about all of the weird shapes but I'm totally going to use your Pelican Master electric carving knife, flip-over foam kung fu technique. Cheers.
Great vid very informative I'm about to do mine now.
Glad you enjoyed it.
OpticsPlanet sir which sights are best for automatic rifles like a holographic site , reflex ,or something different
Diksha Kumar Most of these things are dependent on several factors, but if you are looking specifically for sights that will work automatic rifles direct your question to techsales@opticsplanet.com. You will be reaching our product experts that can help you find exactly what you need!
Great Vid.
Now it's time to find the right one on Ebay.
Thanks
Great video. It really helped!
Excellent video! Thank you for all those tips.
Thanks Steve.
Great job on this video. Thanks!
this is awesome! Thanks so much!
I think you will be happier with the Pelican case - it may cost more, but it should last you a lifetime. Een goede dag verder!
Some good tips here, thanks!
Great job, thank you. I have 3 cases for some revolvers and was wondering the best way to make my cuts neatly
Greetings!
We greatly appreciate your kind words and positive feedback. If you need any assistance, please feel free to reach out to us and we'll be happy to help!
scope should be by the carry handle. if its upside down like in the video the optics are taking the the weight of the rifle plus any time its set down or dropped.
Just rotate the foam...
But then it goes back to what this guy was saying keeping all the weight by the wheels, by rotating it like you're saying will put more weight by the handle
Great video! Thank you!!!
Nice guy, nice rifle, nice case, nice video!
Excellent video... Thank you...
Thanks sir...
A jigsaw blade is meant to be used with a hard surface, I think a jigsaw would mangle the foam. Have you seen the type of craft knife that you can extend the blade slightly and snap off pre-scored sections as it wears? Take a new one, and extend the blade to full length.
If you’re feeling up for a project, ar15.com has instructions for building your own hot wire cutter:
@blackbrd99 Thanks! We're happy to be of help.
@kjwarbrothers Good to hear we helped save you some time
The first proper way of doing this.
ALWAYS MIRROR IMAGE!
Let us know how it works out for you! Thank you for watching.
@TheJToys Thank you!
It's just a cool thing to have with 1001 uses including repairing the airplane that takes you deep into nowhere for the hunt
Thank you!
You sir are a saint :)
thanks
@lab2137 We'll be sure to let Steve know!
Great video. All the videos I've watched show rifles with no slings. Can it be cut out to fit a rifle with the sling on?
Just about anything - that’s the point of carrying it!
That's great.
Should use the electric foam cutters much more precise but other then that nice vid
This is a great video - wish I had watched it BEFORE I attacked my Pelican foam with a razor blade!
A long bladed knife can work (the sharper the better, and heep it straight up and down), but it won't come out as nice. Craft stores sell hot wire cutters.
I have always used a piece of wire coat hanger in my soldering iron. Works great.
Question...Why did you remove the bolt and carve out a separate opening for it? Wouldn't it be easier to leave it in the rifle?
Hi 62T,
If you travel, and especially if you fly, you need to have your firearms in a non-active state (for a lack of a better term, sorry, it's Monday morning haha). For boltguns, this is done by keeping the bolt separate.
Overall it is just a safety precaution.
Thanks for the comment!
@nicandtab Thank you!
I'm undecided between the Pelican 1750 & iM3300, any suggestions? Great video and thx for sharing.
If you dont own a electrical carving knife, what else can you use that works out nice?
For the electric carving knife, is there a particular cutting blade I need to use to cut the foam?
Well, I don't have an electric carving knife. But I do have a jigsaw. Do you think that would work in a pinch?
My case lid closes without having to put a hand on it to latch it closed. But my scope turret does leave a little imprint on the top foam is that okay? As long as there is no serious pressure on it?
Could you use an electric jigsaw instead of the electric knife?
Can the hunting ammunition be put in the case as well? Or is that packed separately?
One more question is your Foam Polyethylene? Regular? Or Firm?
Great Video by the way! 👌
what's that fixed blade knife?
would you recomend this for a pellet rifle
Doesn't the manufacturer recommend that all parts have at least 1 inch spacing between everything? I notice, you don't want things too close to the edge, how close is too close?
+Jonathon Weeks
Hi Jonathon, thanks for your question. I can't say for sure here, as this is a very specific question. Send this question to techsales@opticsplanet.com to reach our tech & product experts. Make sure to mention this particular video in your e-mail & we'll surely be able to answer.
Jonathon Weeks I have one and I keep it about 1 1/2 inch away from the side just to be extra careful. But you coul probably get away with 1 inch
Hey i have a speedmaster 552 and i just got black sharpie on its cherry furniture finish, and tips?
Just how delicate are your scopes?