Restoration and Repairing Old Water Pumps Using D4 Diesel Engine // Restoring Old Large Water Pumps
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Restoration and Repairing Old Water Pumps Using D4 Diesel Engine // Restoring Old Large Water Pumps
#restorationsskills , #restoration , #restore , #restoring , @restorations skills
#RestorationandRepairingOldWaterPumpsUsingD4DieselEngine,
#RestoringOldLargeWaterPumps,
Welcome to the channel: Restorations Skills !! In this video, we found a rusty and old D4 diesel water pump at a scrap shop. I bought it and restored it, and hope it comes back to life. Diesel engines are widely used in machinery like water pumps, tractors, In this recovery video we have restored damaged old diesel engines to water pumps. After recovery, the diesel engine worked fine. The water pump also works fine. We pumped the test water and the water pumped up very well, very strong. I hope you find something useful from this video! I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video. Don't forget to like and subscribe to the channel Link subscribe
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
Welcome to the channel: Restorations Skills !! In this video, we found a rusty and old D4 diesel water pump at a scrap shop. I bought it and restored it, and hope it comes back to life. Diesel engines are widely used in machinery like water pumps, tractors, In this recovery video we have restored damaged old diesel engines to water pumps. After recovery, the diesel engine worked fine. The water pump also works fine. We pumped the test water and the water pumped up very well, very strong. I hope you find something useful from this video! I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video. Don't forget to like and subscribe to the channel Link subscribe
1
You did great keep it up my friend and I wouldn't sandblast any engine because you will never get all the media out even if you tape it up I seen where someone said you should sandblast it's a Handy tool to have but not with some parts like engine's
I can tell you that for the most part you did fine. Please do not use a steel hammer on bearings, PERIOD. Brass or copper is best. Engine rings should be checked and file fitted inside the bore. That is it fella. Nice work repairing stuff from the scrap pile. I do the same thing most of my life. I can totally relate to your methods and hard work. Peace vf
66gy 6g bugvcg. Id oke makasih ue gcytua tugu ya
你有很好的修理技術我很佩服你的好功夫佩服真是棒哦
Supperb job. Lahore Pakistan
Nádherná zahrada a velice šikovný muž s trpělivostí a znalosti
Thanks for watching and supporting me. Thanks very much!!!
Glad you're not working in my shop. I would send you back to school.
AWSOME REBUILD
Love those old engines. Great job 👏
THANKIOU
You deserve to be called a mechanic in your white dress
You are organized and clean, congratulations on the beautiful workshop
Nice job on cutting those valve seats and especially that "eye-crometer" valve adjustment.
Thank you very much. Please follow and support us!
GREAT RESTORE, SHOULD SALE EASY, NICE PAINT JOB .
It has come back to life in bright colours..👍
I am from Iraq 🇮🇶
I need such a pump for the farm...!
Thanks for watching and supporting me. Thanks a lot!!!
Good ilove
Verygood.very Top.very Wonderful.very Congratulations. God bless you
felicidades muy chingon
Very nice and good job.👍👍👍
Nice
you guys do a great job every time another one is alive well done
الله عونك ويعطيكم الصحة العافية أنت معلم وشكرا لك على هده صورة المشرف
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
Good jub. Recycling and resources engin fact. Thanks.
Gostei muito do seu vidio nota 10
This is one of the best restoration channels from your country I think you don't put mud all over the items you are working on and you have a nice setup for your work era so I hope the best for you
Thanks for watching and supporting me. Thanks very much!!!
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
Super! 😍🤗
ماشاءالله تبارك الله
مهندس ميكانيكا من الطراز الممتاز بس لو اقدر اوديه سيارتي 🌹🌹😄😄
Another winner.....and I really like the music at the end.
Very perfec brader
Very good job.
Parabens.....pelo seu trabalho. Fábio Pio. Brasil
I just want to say excellent job restoring. I can't wait until the next one. Thanks for sh this video.
Thanks for watching and supporting me. Thanks a lot!!!
Very beautiful restoration .
Thanks for watching and supporting me. Thanks very much!!!
Good video
Keren
Olá amigo um belo trabalho, ficou todo original ! quanto vc gastou ainda nesse motor?
Very good very nice you job gred 😍 👍👍👍✡️✡️✡️✡️✡️
Lindo lindo Chaooo chile
Good👍👍
Excelente trabalho, aquele abraço do pessoal da cidade Lagoa Santa - MG - Brasíl
Excellent job!!! 👍
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
Nice restoration. Maybe you should have a torque wrench hanging on the wall next to the rest of your tools. It's important the cylinder head and main bearing bolts are torqued to spec.
Voce eu cara goste 👍👍🙏🙏
Good vidéo 👍👍👍
Lo felicito muy buen video,me gusta la manera como hizo el paso a paso de, desarme y la armada,muy bien,siga asi,saludos del otro lugar del mundo,SUR AMERICA.
Thanks for watching and supporting me. Thanks very much!!!
Beautiful
Thanks for watching and supporting me. Thanks a lot!!!
Excellent restoration on this old water pump.I love the Beautiful color you chose for it also. Thanks for sharing. Looking forward to your next one
Thanks for watching and supporting me. Thanks a lot!!!
Perfect Job👍👍
سلام عليكم ممتاز
👍
9hp pawartialar for disal riperingh and entoletion
Nice !
I have seen you repair a lot of waterpumps that looks like a big turbo, what's the name of this type of pumps ? I never saw similar here in my country 🤔🤔
လိူျခတယ္ဘယ္ဝယ,္ရမဲ
FICOU NOVO
Superb nice job👏👏👏👍
ج
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
Thanks for watching and supporting me. Thanks a lot!!!
أللهم صل على محمد...
Oi, boa noite professor! Então, adorei a matéria que o senhor pois no canal! Já tive a satisfação de ter executado alguns trabalhos com este em algumas tomadas. Meus parabéns, um imenso abraço .
Muito bom Campina
exselente trabajo muy bueno solo un comentario .no se deve prender la bonba nunca sin agua ...
Thanks for watching and supporting me. Thanks very much!!!
Máy vẫn khói lắm
I always enjoy your videos. I learn something. I really like the paint you used. Please keep sharing.
Thanks for watching and supporting me. Thanks a lot!!!
Congratulations on the renovation and a 10 for the workshop, very organized, congratulations! / Parabens pela reforma e um nota 10 pela oficina, muito organizada, Parabens mesmo!
Thanks for watching and supporting me. Thanks a lot!!!
Gd pm magkano gawa mo makina lang 18 HP diesel
Top um trabalho de recuperação 👏👍🤝🇧🇷🇧🇷🇧🇷🇨🇮
Cái sên bơm nước y như vậy bên mình có ko .. mình muốn mua 1 cái
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks for watching and supporting me. Thanks a lot!!!
❤👍
The running engine is different from the one you reworked? The gear case cover and crankcase breather cover are different.
Clearing with gaz ? Show always clearing plz
Cómo vas a probarlo la bomba sin agua mecanico
Superb bro
This guy really uses the ugaduga with that pneumatic air gun like he used it on everything even the rod bolts he's like how many foot pounds all of them lmao 🤣🤣🤣🤣 no assembly lube...... but you still did a great job
You can do it more easily with sandblasting
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!
👍👍👍🌺🌺🌺🌺👍👍👍
Thanks for watching and supporting me. Thanks a lot!!!
Babai kahan saman Aaj ham bich mein Mohammed neta kahan se mangwa I
Is not Yanmar D4 that should be Ta series? 6 hp.
Faze bom
中國製造的抽水機？
xoáy supap mà không được 15s sao kín ?
thằng này mướn người ta làm hết chỉ ráp lại thôi.
Thanks for watching and supporting me. Thanks very much!!!
Xạo xạo. Máy như vậy mà ve chai. Máy vậy vệ sinh dầu là nổ thôi
😆😆😆👍👍👍👍👍
Cost
Mntul kin lnjut
Thanks for watching and supporting me. Thanks a lot!!!
Dhnbad
Thanks for watching and supporting me. Thanks very much!!!
L
After you bought this pump by weight, are you gonna sell it or you'll use it for personal purposes?
Thanks for watching and supporting me. Thanks a lot!!!
Mirip @bang_uwar
Super