Thank you so much. We have been trying to update it too but have really been too busy recently. Will update it and share our latest knowledge soon in a new video. Check back soon.
You should include an installation tray. I just installed a Whitestone Dome on my Pixel 2 XL and it was hard enough, with the tray. I can imagine it being even harder without the installation tray. It also takes practice so you should include at least 2 of everything in your installation kit. The Whitestone Dome has an installation tray and I still got it off to the left just a hair. It helps that you can slide the glass gently before the curing. I thought I had it lined up perfectly but I didn't. Does your product have the same excellent oleophobic coating as the Whitestone? It's the best tempered glass I've ever felt. So smooth and doesn't pick up fingerpribts.
If I have a lot of time to wait no hurry to use phone, after whole installation process, is the glue really dry already? How long to wait so it is really dry then I use it will be safest not causing any bubble and problems?
Actually the glue is cured after around 10 Mins. The part that leaks slightly is just some oil base in the loca itself. You can use it directly after 10 Mins of curing.
I've read it is extremely hard to pull off phone when replacing, could I use a skin tpu screen protector and then apply this glass screen protector with the glue over that? To prevent it from being a problem to pull off later?
I have tried so many glass screen protectors and have removed them all within the first week, all of them only have adhesive around the edges and are soooo expensive in my country. I am so fed up, and i can't get the whitestone dome to Namibia as the only way i can get them here without breaking my bank is ebay. I would really like to at least try yours! I write reviews in my town's local newspaper so I don't really have the money for the more expensive ones. But I am so interested in your product!!
I have a question. Sticking like this with glue will cause any damage to the screen in future ?? or Like we try to change the glass that time does it cause any problem ?? Anyway you video was a great help for me. i did the same way how u did and its really good. Thanks for the video. Kindly reply to my above question. thanks
Generally no. I took one off yesterday and there was a bit of a clump of glue where the glue filled in some scratches, but I scraped it off relatively easily. My screen smelled like the UV glue for maybe an hour, but afterwards it's pretty much the same as before I put on the protector.
Hi there, I currently have the dome glass on my phone but the installation process was so difficult and painful that I would love to try this product as it looks so easy to install (and hopefully cheaper). Could you please let me know where can I buy this from? Thank you.
SG Fresh Idea The most painful part of the process was trying to take the phone out of the trays after curing the glue. I almos had to break them as they were glued, there was glue everywhere anyway what a mess. However the result was worth it. My screen looks amazing!
ingridanto22 Never heard that before but it makes sense as the LOCA would have cured on the tray and the phone as it is transparent. Yes a loca based tempered glass is simply amazing
Haha no worries. Anytime man. If you would like us to send you a set to try it out, just drop me an email at sgfreshidea@gmail.com anytime :) You have great videos and I saw you latest video on the How I make videos and saw the story boarding and had a great laugh at the cartoon figures.. Impressive. Great content anyway :)
What kind of liquid adhesive is used ? The liquid adhesive struck on my speaker and blocking the voice, please suggest best solution for its removal. Thank you
Hey! I just have a question about the glue! I haven't purchased any of your products, but I do happen to have some LOCA glue (phone glass repair). Assuming it's just... ordinary LOCA glue...? Could I still use that to stick on any glass screen protector onto my phone and expect similar results like in your video? Thanks :>
AND NEVERMIND Another one of your videos answered that question, the aftermath of LOCA 1000 vs 2500. I have the varient meant for holding in the glass, like the 1000. Any chance I could purchase JUST the LOCA glue you guys use?
Hi thanks for asking. I believe for glass lcd repair you will be using either 1000 or 2500 series. Check out my other video on my channel on 1000 vs 2500. Don't think they are suitable due to their strength and viscosity
Hi there it will not go away once the loca has been cured. It will not damage the display but the only way to get rid of the bubbles is to redo the whole thing again with a new piece of glass.
Does the oil at sides become dry after 12 hours, need to wipe sides after 12 hours? Will the sides attract dust after 12 hours and how to clean if it happens? If too little time or longer time for UV, what happens? Thanks
Will your products be available in France soon? I've bought the pixel 2 XL few days ago and I need effective and cheap screen protector and yours look great and fully adhesive for a good price and cheaper than Whitestone's one.
I have covered the speaker with a little adhesive paper. But when the glue came out from under the glass, the adhesive was fallen off the phone. So I used some paper to soak up the glue.
I had cured the glass as per instructions and the result was fine. But after a day use bubble appeared along with the curved edge of S8. Is it due to excess or lack of UV light exposure?
SG Fresh Idea of has a black outline around the screen and that's only where the adhesive is. It's not horrible but I'd love to have one like this that I wouldn't have to worry about coming off. No one is making high quality tempered glass fit the essential phone. This just looks awesome. And thank you for the reply. I appreciate it.
@@yasaswijeratne7535 In video it says wait 12 hours before you put your case on but lol that comment is 3 months ago which is no problem anymore. Its my turn to do it now, i just bought for mate 20 pro and doing it proffessional:)
Hi, I have a problem with s pen. The glue drip down to the bottom of the Phone on the s pen. Now I cant get it out. S pen goes down when I push it but there is no click and it goes back to the starting position. What can I do?
Why did you choose this liquid over Whitestone Dome Glass liquid screen protector. Will the White Stone also be having liquid leak out over the sides for 24 hours or so? Thank you kindly. Do you recommend it? How do cases work with it?
+Trudy Schwartz-Burrill Hi thanks for asking. This LOCA is slightly more viscous as compared to Whitestone making it easier to control as a beginner. The side leaks will still happen slightly depending on how the installation was done. Mainly, it is just a oily substance and easy to clean off. Also this is cheaper than Whitestone loca
SG Fresh Idea thanks for getting back to me so fast, I bought the glass my phone come in Friday. I'm nervous about the White Stone no w th at I see liquid screen protector full body now from Armorsuit. I HAVE to say I'm impressed with that with just the number case. Erica the girl that likes to film stuff did a drop test video on the number 11 feet no screen protectors and it was no problem. AMAZING. I'd love to do that Do I have the guts? I wonder if you could put one glass protector on the front and one on the back and just use the bumper shield protector case that is drop tested to 11 feet. I feel because then it would be double glass all the way around that it would be protected. Especially with glass rather tthan just thin plastic. I'd feel safer. ANYONE?
SG Fresh Idea it must be because UAG and ZIZO do not work. They are too tight as you saw as are many Speigans, so I don't think that a Speck cover would work either with the Dome Maybe this type? Where do you get it, please? I imagine you have to put it on perfectly it appears. Getting scared. I heard some people got liquid in their ports. One its cured yikes? Do you know if it leek also for 24 hours? Here and there?
morningmoon97 there is a video where GrafX I think thats his name does a glass removal video of the whitestone glass. You need to be careful do it slowly but it comes off without issue and does not hurt your phone.
Hi there no we don't currently. The main reason for the gap is for case friendliness. If it is made lower, it may cause a lot of problems with cases. Check us out at www.sgfreshidea.com
Have you done any compatibility testing with different phone cases? A lot of the glass screen protectors lift off from the curved screen when there is a case.
+the angry drummer Hi thanks for checking yes we have. www.sgfreshidea.com/mobile-phone-beauty-news-singapore/InvisShield-True-Fit-Full-Adhesive-Tempered-Glass-Case-Compatibility-List---Similar-to-Whitestone-Dome.html
I have a problem where when setting down the tempered glass, it forms that 'rainbow' effect in a spot and the glue then proceeds to spread around that one area but then never touches it, leaving a really ugly blemish. How can I make sure to not encounter that?
Hi there thanks for checking. No we don't need to protect it as if there is no pressure applied to the glass, the glue will not flow out of the glass into the receiver or the home button.
Actually it is mainly the glue formulation that is the important thing. Not all loca is made equal. I use our InvisShield True Fit to good results. Check it out at www.sgfreshidea.com
ALFAru Yes it is LOCA but it is specially formulated. Please do not use 1000 or 2500 available in the market as the removal process is extremely difficult.
ALFAru no worries 2500 is slightly better than 1000 but the viscosity is too thick which means you have to press on the glass to spread it and that may cause you to use too much LOCA or have uneven coverage which causes the jagged edges and collection of dust over a period of time
Hello. I have installed this kind of screen protector onto a Samsung Note 8 , I've waited the adhesive to work its way, then it was dropping out of the edges and came a little bit into the on/off button. I have cleaned the excess adhesive and after I had finished the installation this button was working very hard, the click feeling was gone. Question? Does anyone know if the button will work properly after some time or will it remain this way? Thanks!
Try this video: th-cam.com/video/oGCOl4JBGeI/w-d-xo.html And also try to put some Alcohol into the button and pressing it around 30 to 50 times, the button should loosen up.
I did it with S8 of my wife. It was looking well enough till the next morning. Nearly a 1/3 of screen didnt stick! The phone looks ...very-very bad. How can I remove the glass without damaging the phone???
+interamer Hi thank you for asking. We are in process of launching our retail version and the final details will be put in place in a week or 2. For the first 10 customers, we will be offering a very special price for them to give us feedback on where we can improve our product. Like and subscribe to our Facebook page at facebook.com/sgfreshidea and we will be announcing the details there. Thanks :)
Did this for my s7 edge and the glue leaked into the home button, I stopped the process because i panicked a little bit, should I be concerned? How can I fix it, i cleaned it up as much as I could but I can still smell the glue
Don't worry about it. Just take some alcohol (isopropyl alcohol) will work fine and pour a little bit into the home button. Keep pressing the home button about 20 to 30 times. Do it again if you wish to. The smell will go away in a few days. Not too big a concern. :) if it does not feel stuck
Thank you! This is the best installation guide for this type of screen protector that I've seen on TH-cam.
Your instructions are much better than the Whitestone instructions. You actually explain why bubbles form and how to keep that from happening.
Thank you so much. We have been trying to update it too but have really been too busy recently. Will update it and share our latest knowledge soon in a new video. Check back soon.
Can I use this glue to pour in my ears to block out this awful music?
+jjsd250 LOL please don't do that. You happen to know there is a thing called a Mute button right?
Savage
SG Fresh Idea 😂
АА!!! я просто покатился со смеху! )))
Rekt!
You should include an installation tray. I just installed a Whitestone Dome on my Pixel 2 XL and it was hard enough, with the tray. I can imagine it being even harder without the installation tray. It also takes practice so you should include at least 2 of everything in your installation kit. The Whitestone Dome has an installation tray and I still got it off to the left just a hair. It helps that you can slide the glass gently before the curing. I thought I had it lined up perfectly but I didn't. Does your product have the same excellent oleophobic coating as the Whitestone? It's the best tempered glass I've ever felt. So smooth and doesn't pick up fingerpribts.
If I have a lot of time to wait no hurry to use phone, after whole installation process, is the glue really dry already? How long to wait so it is really dry then I use it will be safest not causing any bubble and problems?
Actually the glue is cured after around 10 Mins. The part that leaks slightly is just some oil base in the loca itself. You can use it directly after 10 Mins of curing.
I've read it is extremely hard to pull off phone when replacing, could I use a skin tpu screen protector and then apply this glass screen protector with the glue over that? To prevent it from being a problem to pull off later?
Hi. How is the removal of the glass, specially the adhesive? does it gonna be removed easily?
I have tried so many glass screen protectors and have removed them all within the first week, all of them only have adhesive around the edges and are soooo expensive in my country. I am so fed up, and i can't get the whitestone dome to Namibia as the only way i can get them here without breaking my bank is ebay. I would really like to at least try yours! I write reviews in my town's local newspaper so I don't really have the money for the more expensive ones. But I am so interested in your product!!
Available for mate 20 pro? If it does will it affect the in-screen finger print scanner?
I have a question. Sticking like this with glue will cause any damage to the screen in future ?? or Like we try to change the glass that time does it cause any problem ??
Anyway you video was a great help for me. i did the same way how u did and its really good. Thanks for the video. Kindly reply to my above question.
thanks
Generally no. I took one off yesterday and there was a bit of a clump of glue where the glue filled in some scratches, but I scraped it off relatively easily. My screen smelled like the UV glue for maybe an hour, but afterwards it's pretty much the same as before I put on the protector.
Thank you for the reply and advise
Hi there, I currently have the dome glass on my phone but the installation process was so difficult and painful that I would love to try this product as it looks so easy to install (and hopefully cheaper). Could you please let me know where can I buy this from?
Thank you.
ingridanto22 Hi thanks for sharing. Can I check which part did you find difficult to install for the Whitestone piece?
SG Fresh Idea
The most painful part of the process was trying to take the phone out of the trays after curing the glue. I almos had to break them as they were glued, there was glue everywhere anyway what a mess. However the result was worth it. My screen looks amazing!
ingridanto22 Never heard that before but it makes sense as the LOCA would have cured on the tray and the phone as it is transparent. Yes a loca based tempered glass is simply amazing
SG Fresh Idea that is why I would love to try your product. I did not see any trays or anything involved.
Reminds me of the Whitestone Dome Protector install. 😀👍🏾
Haha Yes it is similar but we are using our own tempered glass and our own LOCA formulation. at a lower price point :)
SG Fresh Idea Thanks. Very good to know. I will take a look at them when the s9/9+ comes out.
Haha no worries. Anytime man. If you would like us to send you a set to try it out, just drop me an email at sgfreshidea@gmail.com anytime :)
You have great videos and I saw you latest video on the How I make videos and saw the story boarding and had a great laugh at the cartoon figures.. Impressive. Great content anyway :)
SG Fresh Idea thank you. I sure will. 😉
SG Fresh Idea lower price point... I like that.
Very clear and useful video and instruction. Thank you.
No problem. Hope it helps you. Help share this video out :) Thanks
would the liquid stain the phone if not wiped immediately?
What kind of liquid adhesive is used ? The liquid adhesive struck on my speaker and blocking the voice, please suggest best solution for its removal. Thank you
I want to ask one question that i have many scratches on my screen will this glass applied to my phone without bubbles in it ?
Is the risk that glue will flow into the home bottom(i speak about s7 edge) and will damage it?
I think it might so it's better to just go with a normal screen protector
Yeah they use glue because there is no face buttons
I try it and my home bottom is working
I sealed it with plastiline, is a little time consuming to clean, otherwise method works, still looking for easier solution
Thanks this really help me much good thing I watch your video
No problem. I am glad it helps.
Hey! I just have a question about the glue!
I haven't purchased any of your products, but I do happen to have some LOCA glue (phone glass repair). Assuming it's just... ordinary LOCA glue...? Could I still use that to stick on any glass screen protector onto my phone and expect similar results like in your video?
Thanks :>
AND NEVERMIND
Another one of your videos answered that question, the aftermath of LOCA 1000 vs 2500. I have the varient meant for holding in the glass, like the 1000.
Any chance I could purchase JUST the LOCA glue you guys use?
Hi thanks for asking. I believe for glass lcd repair you will be using either 1000 or 2500 series. Check out my other video on my channel on 1000 vs 2500. Don't think they are suitable due to their strength and viscosity
Hello I have a question, if my screen its cracked? its going to work? tjanks
hello, good solutions you give here.. but i have a question... how many LOCA you recomend for the note 9, S9+ and s9?
Use 2 ml and it will be sufficient
Small bubble appeared in the edge of glass after one or two days after curing. What should I do then??
the glue which we use to remove air is harmful for display?
Any ideas on how to remove or melt the dried UV glue in the corners of the phone?
A little alcohol on a piece of cloth should do the trick
@@user-pb4bn1eb2j thanks mate! Gonna try that
Hi, what can I do when the liquid spill onto the speakerphone and already cured? also it spilled on the sidelines of the phone and also already cured?
I used i uv glue tempered glass and it leave a bubble after dry so please help me out how to remove it if glue dried
How much glue do you recommend using for loca 1000 and for 2500?
Bro if there is a bubbles in uv tempered glass will it damage the screen if i have on in a month??
The bubbles go away in overtime??
Hi there it will not go away once the loca has been cured. It will not damage the display but the only way to get rid of the bubbles is to redo the whole thing again with a new piece of glass.
Ok!
Does the oil at sides become dry after 12 hours, need to wipe sides after 12 hours?
Will the sides attract dust after 12 hours and how to clean if it happens?
If too little time or longer time for UV, what happens?
Thanks
Will your products be available in France soon? I've bought the pixel 2 XL few days ago and I need effective and cheap screen protector and yours look great and fully adhesive for a good price and cheaper than Whitestone's one.
Hi it is available to France at www.sgfreshidea.com check it out
what if accidentaly some oil adhesive has spread on the earphone speaker? how to fix this?
I have covered the speaker with a little adhesive paper. But when the glue came out from under the glass, the adhesive was fallen off the phone. So I used some paper to soak up the glue.
Can LOCA Glue be used if a phone has an existing crack?
well Done 😃
Thank u I did it exactly as u did and it came out perfect nothing got in my speakers or buttons.
I had cured the glass as per instructions and the result was fine. But after a day use bubble appeared along with the curved edge of S8. Is it due to excess or lack of UV light exposure?
Drop us an email at sgfreshidea@gmail.com with some photos of the bubbles so that we can advice :) we are always here to help
Did you solve it?
I hv the same problem...
Will these be made for other phones like the essential phone? There isn't any really good one for it yet. Thanks. Great video.
sam iam Hi we can consider that. What does your tempered glass look like on the essential phone currently? Non full coverage?
SG Fresh Idea of has a black outline around the screen and that's only where the adhesive is. It's not horrible but I'd love to have one like this that I wouldn't have to worry about coming off. No one is making high quality tempered glass fit the essential phone. This just looks awesome. And thank you for the reply. I appreciate it.
sam iam Let us look into this and see if it is feasible to bring in the Essential version of InvisShield True Fit
SG Fresh Idea cool. Sounds good. Thank you.
Hey my Friend ... thanks for your help at facebook chat. i write reviews after i installed your very good Screenprotectors at our S8 plus. Many Thanks
Hi,what can i do if i have some oil left under the tempered glass? Uv tempered that is..
Hi there what do you mean oil under the glass? There should only be the glue under the tempered glass right? :)
Yes,there seems to be some oil ,like you said as i put on my case a bit soon
..
@@yasaswijeratne7535 In video it says wait 12 hours before you put your case on but lol that comment is 3 months ago which is no problem anymore. Its my turn to do it now, i just bought for mate 20 pro and doing it proffessional:)
Best video of this process i ever saw
Hi, I have a problem with s pen. The glue drip down to the bottom of the Phone on the s pen. Now I cant get it out. S pen goes down when I push it but there is no click and it goes back to the starting position. What can I do?
Ok I found the answer myself. Water dissolves this kind of glue. Phone is water ressistant do its fine to put it to the water for some time
How could i get this glue separately...i have my tempered glasa...but glue got leaked out....
Hi are you base in Singapore?? Do you have a shop i can go to??
Mohamed Imdad Mohamed Salih Hi yes we are. You require us to install?
does this come in privacy glass?
Why did you choose this liquid over Whitestone Dome Glass liquid screen protector. Will the White Stone also be having liquid leak out over the sides for 24 hours or so? Thank you kindly.
Do you recommend it? How do cases work with it?
+Trudy Schwartz-Burrill Hi thanks for asking. This LOCA is slightly more viscous as compared to Whitestone making it easier to control as a beginner. The side leaks will still happen slightly depending on how the installation was done. Mainly, it is just a oily substance and easy to clean off.
Also this is cheaper than Whitestone loca
+Trudy Schwartz-Burrill The tempered glass is slightly smaller than Whitestone and as a rough gauge, UAG Monarch is able to fit InvisShield True Fit
SG Fresh Idea thanks for getting back to me so fast, I bought the glass my phone come in Friday. I'm nervous about the White Stone no w th at I see liquid screen protector full body now from Armorsuit.
I HAVE to say I'm impressed with that with just the number case. Erica the girl that likes to film stuff did a drop test video on the number 11 feet no screen protectors and it was no problem. AMAZING. I'd love to do that Do I have the guts?
I wonder if you could put one glass protector on the front and one on the back and just use the bumper shield protector case that is drop tested to 11 feet. I feel because then it would be double glass all the way around that it would be protected. Especially with glass rather tthan just thin plastic. I'd feel safer. ANYONE?
SG Fresh Idea it must be because UAG and ZIZO do not work. They are too tight as you saw as are many Speigans, so I don't think that a Speck cover would work either with the Dome Maybe this type? Where do you get it, please? I imagine you have to put it on perfectly it appears. Getting scared. I heard some people got liquid in their ports. One its cured yikes?
Do you know if it leek also for 24 hours? Here and there?
Is there a chance that the glue will flow into the upper speakers?
Yes there is if you apply pressure on the glass when the loca is spreading.
yes, this person is not using protective sealant that is provided by the kit, you need to have speakers covered.
How do I remove the liquid glue that was already dried on the phone and redo the whole glueing process again?
Will the glue ruin the phone display? And what if I.want to remove the glass?
morningmoon97 Hi thank you checking. No it will not. We have any video in our channel showing the removal process too
SG Fresh Idea thanks for the prompt reply
morningmoon97 there is a video where GrafX I think thats his name does a glass removal video of the whitestone glass. You need to be careful do it slowly but it comes off without issue and does not hurt your phone.
Yeah I took mine off with no residue at all
If 2 years later, will it bond to the screen and causing cloudiness to the screen?
Hi! Did this for my s8 and the glue leaked into the earpiece, what should i do? coz when i have a phone call, i cant hear well
Hi there try this and pick out as much cured loca as possible
th-cam.com/video/oGCOl4JBGeI/w-d-xo.html
Please tell me how to remove the remains of glue. It's already stuck in my smartphone body.
Do you have a protector that covers edge to edge? The gap seems quite big on the edges
Hi there no we don't currently. The main reason for the gap is for case friendliness. If it is made lower, it may cause a lot of problems with cases.
Check us out at www.sgfreshidea.com
Have you done any compatibility testing with different phone cases? A lot of the glass screen protectors lift off from the curved screen when there is a case.
+the angry drummer Hi thanks for checking yes we have. www.sgfreshidea.com/mobile-phone-beauty-news-singapore/InvisShield-True-Fit-Full-Adhesive-Tempered-Glass-Case-Compatibility-List---Similar-to-Whitestone-Dome.html
Thanks for the video! It definitely helped my first install. Also, I like the choice of music. :)
Mine has some kind of fog stripes when is wet is that normal
Do i use this glue in another phone ex motorola for pasting screen protector
My screen protector don't paste there are many bubbles can i use this glue to paste glass protector in motorola droid turbo 2
i really hope this is available in india.......but this is definately cheaper than the white stone dome glass
500-600
Is the oily substance that leaks during the 12 hours safe for the buttons on the phone?
Yes it is. The oily substance is not glue but just an additive. Our latest formulation of loca has minimal leakage after curing.
www.sgfreshidea.com
SG Fresh Idea Oh ok. That's awesome, thanks for the quick reply! Also is the glass protector reusable for the galaxy note 8?
This one is already available in US right?
Marizze Ann Malabanan We are able to ship to the US. www.sgfreshidea.com
I have a problem where when setting down the tempered glass, it forms that 'rainbow' effect in a spot and the glue then proceeds to spread around that one area but then never touches it, leaving a really ugly blemish. How can I make sure to not encounter that?
Hi there which model is it for and is it from our website www.sgfreshidea.com
Yes its for the Note 8
Whats the adhesive like if you need to remove the panel?
+DJ Johnson Check out my other video here for removal.
th-cam.com/video/G9QuCoY8xKA/w-d-xo.html
it capture dust from edges after some days??
You can use a damp cloth to wipe it off if it does. Over time, it will gather less dust as the sides become less sticky
Can i use this without the UV light?
what's the height of the piece of paper you use to prop up the glass?
We use a sponge now if you see our latest videos. It works better
Perfect job👌👌
does it still works is there are small scratches on the phone?
+Enrique Mora Yes it will still work though it may not cover the scratches totally.
Very nice and helpfull video!
Do i have to protect s7 edge home button when applying glue?
Hi there thanks for checking. No we don't need to protect it as if there is no pressure applied to the glass, the glue will not flow out of the glass into the receiver or the home button.
SG Fresh Idea thanks a lot
what's the importance of the UV light ?
Is it available for the S7 edge?
+Idalia Ricardo Hi yes it is available.
is there an option for us to buy JUST the glass?
phuc dinh yes there is in our website. www.sgfreshidea.com
Look for Glass only
is this compatible with whitedome kit.
Adrian Lo Hi thanks for asking. unfortunately it is not :)
Do u have this for the pixel 2 non xl
do u have pixel 2xl true fit?? if yes i need the link.
Thanks for checking. Here you go. www.sgfreshidea.com/invisshield-true-fit-google-pixel-2-xl-full-adhesive-tempered-glass-clear-set.html
Cover speaker!??
Knock off or
Whitestone Dome
Which do you guys prefer? I'll use the knock off if same result.
Actually it is mainly the glue formulation that is the important thing. Not all loca is made equal. I use our InvisShield True Fit to good results. Check it out at www.sgfreshidea.com
how can i remove this? or i have to remove it with the display?
Where to purchase this glue
Awesome bro
thanks man ily ur a legend
Can we use it for galaxy s7 edge . Can u make a video for galaxy s7 edge.
What is the back protection in this video ?
Where did you see the back protection? Any timing? Let me check it for you
Fastly at 4:48
That is our InvisShield Softflex Matt Protector
Can you send me the link please.
www.sgfreshidea.com/samsung-note-8-invisshield-softflex-full-cover-matt-protector-back.html
Here you go
so after it has been sticked to the phone for about 3 months its impossible to remove
It can be removed anytime.
+SG Fresh Idea what adhesive is it, LOCA?
ALFAru Yes it is LOCA but it is specially formulated. Please do not use 1000 or 2500 available in the market as the removal process is extremely difficult.
I think 2500 is not too hard to remove, but thank you for your reply and advise!
ALFAru no worries 2500 is slightly better than 1000 but the viscosity is too thick which means you have to press on the glass to spread it and that may cause you to use too much LOCA or have uneven coverage which causes the jagged edges and collection of dust over a period of time
Hello. I have installed this kind of screen protector onto a Samsung Note 8 , I've waited the adhesive to work its way, then it was dropping out of the edges and came a little bit into the on/off button. I have cleaned the excess adhesive and after I had finished the installation this button was working very hard, the click feeling was gone. Question? Does anyone know if the button will work properly after some time or will it remain this way? Thanks!
Try this video: th-cam.com/video/oGCOl4JBGeI/w-d-xo.html
And also try to put some Alcohol into the button and pressing it around 30 to 50 times, the button should loosen up.
Is it for galaxy s10 plus?
We are working on a version that can work on the s10 and s10 plus fingerprint sensor and should be launched within 2 weeks
I can't use to normal screen Android phone?
I did it with S8 of my wife. It was looking well enough till the next morning. Nearly a 1/3 of screen didnt stick! The phone looks ...very-very bad. How can I remove the glass without damaging the phone???
What happened to it? What loca was used?
@@SGFreshIdea a glue was in the same pack with te glass.
please make a kit for the Essential phone! We need it!
what if there is dust inside?
What can i do?
Hi there if there is dust inside the only way is to redo the whole piece.
Did you have a Shop?
We have a warehouse here in Singapore. How can I help?
What type of glue you use?
+Mael Hussein Hi we are using a specially formulated adhesive for this. Are you looking for something similar?
Yes
do you just sell the LOCA glue by itself?
mattng105 www.sgfreshidea.com/invisshield-true-fit-loca-uv-adhesive.html
Here you go :)
Is one available for the LG V30?
Yupz at www.sgfreshidea.com
SG Fresh Idea Thanks. I just saw the video after I commented. :-)
Hmmm, unfortunately it doesn't support many phone, I'd like to use to my zte nubia m2 and z17 mini but there's no, too bad
Where can I buy this??
+alexmacchia Hi thank you for asking. We are waiting for our final batch of adhesive to be shipped to us and the retail package will be out soon.
make a video on removal as well...
Where do I get this for my note 8
+Larry Smith Hi there. You can get this at www.sgfreshidea.com
if only my local services has the same skill as you...
What is the name of the glue??What is tge details?Is it glass glue??
Sayan Mondal Hi it is the InvisShield UV Adhesive. We have it on our website at www.sgfreshidea.com
Yes it is meant for Tempered Glass application
Can I remove loca?
Sayan Mondal Here you go on removal th-cam.com/video/LCAOH7cfggE/w-d-xo.html
What is the name if the glue?In my country that is not available
Sayan Mondal it's our own formulation
What is glue is that
How to make that Loca glue ourself?
Looks good where may i buy it?
+interamer Hi thank you for asking. We are in process of launching our retail version and the final details will be put in place in a week or 2.
For the first 10 customers, we will be offering a very special price for them to give us feedback on where we can improve our product.
Like and subscribe to our Facebook page at facebook.com/sgfreshidea and we will be announcing the details there.
Thanks :)
When glass will be available to buy please let me know I would like buy it. Think about instalation frame (tray) without it instalation is difficult
Did this for my s7 edge and the glue leaked into the home button, I stopped the process because i panicked a little bit, should I be concerned? How can I fix it, i cleaned it up as much as I could but I can still smell the glue
Don't worry about it. Just take some alcohol (isopropyl alcohol) will work fine and pour a little bit into the home button. Keep pressing the home button about 20 to 30 times.
Do it again if you wish to. The smell will go away in a few days. Not too big a concern. :) if it does not feel stuck
SG Fresh Idea thank you for the quick answer and tips. I will try it, great products by the way!
@@SGFreshIdea hello sir I've put this glass on note 9 but glue went on the ear receiver . I can't hear well now :(