I was at a stoplight today and looked over at a car with a rusted out wheel arch. I started imagining how I'd go about fixing it thanks to watching these videos all the time.
I'm 84 yr. old and your video's inspired me to try fixing the wheel arches on my Silverado. Burned my shop recently so the only body tools I have, had handles burned off. Took a one-by piece of pine and made a handle. Cut a piece out of a 55 gal barrel and proceeded to make a patch panel-- the way you taught us. Thanks for your videos.
A man that knows his trade and a master at it not intimidated to share his knowledge and talent few people can teach as this man with no pretense I have learned more from his videos tank you keep them coming
Thank you sir!!! Thank you for teaching I was going to pay a guy 7.000 for metal work, started 2 months ago myself from watching your videos. So far I spent maybe $600 thanks from Michigan
He’s that good of a teacher isn’t he! Love his videos. My favorite part is that he uses basic tools. That way it teaches us that no matter what tools we have, we can do this! With the basics, we can do anything!!!!
@@katykayy it's pretty incredible what you can do without all the big tools as someone who is just getting started with rust repair I really appreciate it
Oldie but a goodie! I appreciate all you do for this art! You’ve inspired me to tackle my 84 f150 with confidence and when my confidence starts to trickle off a bit, I just watch another round of videos! Thank you!!
@@David-uu1oj Either way. What impresses me is that he is keeping the pieces small and easily worked. All those other guys with the expensive fancy tools would have me tossing a day's work and sizable panel instead of a few minutes on a little piece after a screw-up. With the bonus that the spoiled piece serves pretty much as a template for it's replacement.
Love this channel and the knowledge that Fitzee has. This channel has inspired a lot of confidence in me that I can do major fab repairs with regular tools in my home garage. I have definitely started looking a body repairs from a much more basic set of eyes instead of making things way harder than they should be. Thanks for taking the time to share your years of knowledge.
I'm repairing the rear arches on my car , this video has been has been a great help thanks for making it. You have a great skill it's giving me inspiration to get my car done.
Im well into this stuff on a 1963 galaxy convertible. rusty rockers, rusty sections on the truck lip, spots around the rear lights, rust pits on the lower rear fenders and some funky rust on other sections and an area on the floor behind the top where water channels down and sat on the original floor. all the tricks and tips I'm picking up watching these videos has given me the confidence to attack it all by myself instead of parting the work out like I've done in the past. satisfying.
You are one of the best teachers I have seen on TH-cam I would like to thank you for your help in fabrication a man with minimal tools just like me and have of the rest of the people thanks from newbunswick
I have a repair I need to do on the rear wheel wells of my 2004 F-150. I've done this repair in the past, but I will follow your technique instead of cutting out the bad metal and remaking that portion. Thanks for sharing your knowledge and wisdom; your channel is among my favourite content in all of TH-cam!
You are truly a 'Master of Metal' ! and a great teacher. You've shown that one can have excellent results without spending thousands of dollars on specialized equipment. I've learned a lot from you - thank you !
Thank you Fitzee for this informative video. I often revisit it while contemplating whether to buy new panels or to repair the damaged parts myself. Similar to other videos you've made, my fender has a double layer of sheet metal. The straightforward choice would be to purchase new fenders, but the more engaging and educational option is to undertake the fabrication myself, gaining valuable experience. I'm confident this hands-on practice will be beneficial in my engineering studies. Your videos are greatly appreciated.
Hi Fitzee, You know how to explain the issues you can get into while doing this body repairs. Great video again. Thanks for spending so much time to make this content. 👍
Just bought a rusted out car that needs a lot of welding work and I'm so glad I found this channel because I have never done body work before. Should be a big help and should save me a lot of frustration to have a plan going into it.
I have not seen anyone do such art on a car since I was in school. The shop instructor teaching the another shop did work on his own car and I always told people you could not tell where he patched before it was painted. You my friend are an artist, my hat is off to you.
good stuff! The boys first car is a 1967 Cougar and we are working on restoring it for his 16th birthday in a year from now. This series of instructions is giving us confidence to do proper body repairs - thanks for sharing your experience Fitzee...
I really enjoy your videos. Yesterday I repaired a quarter panel using your methods. They work well but I need more practice. Good thing I got lots of time to learn before I start rebuilding my 1940 Chrysler Royale
Thanks for an excellent Ezy to follow video, all I have to do now is copy your work. Your a great man sharing your knowledge with us. Cheers from Australia, mate.
Just the video I was looking for to repair the rear fender edge on a 2003 Blazer! Unfortunately I'm missing a chunk of the bottom piece that marks the original curve of the opening, so I think I'll replace that first, using the other side to make sure the curve is correct front to back. Thanks again for another great video! Also love you attitude about the unexpected rust. "More videos." :)
Brother you need to come to Texas! It's rare to see cars that rusty. You'd still have plenty to do, but wouldn't have to spend so much of your talents fixin' holes. THANK YOU though, for sharing your skills. You're an inspiration!
Best metalsmith/body man on the 'Net (ioho), and it's nice to be able to share these vids with young kids w/out fear of 'f bombs' and other salty language being hurled about. Fitzee has motivated us into confidently tackling that rusty, rounded, forward roof portion on our horse trailer. Thank you, Fitzee!
Thanks Fitzee. I’m just after cutting out the bed sides on my Dakota to patch in new outer arches and found the wheel houses or inner fenders or whatever all rusted out. So I’ve been patching new metal into there. I don’t much care what the welds look like up inside the fender, who’s going to look up in there when she’s right side up- but where the outer skin attaches to the inner needs to be smooth. So I used your cut and butt method and it works a damn sight better than what I was doing before. I’m going to be using all your methods to get this done. It’s my first attempt at body work. I started on the inner parts of the box so I could practice welding before moving onto the outer parts. Eventually I’m doing all the rockers and cab corners when the box is done. My friends think I’m nuts but you knows it’s cheaper than buying another truck- even a decent used one.
Every video blows me away, I still find it difficult to comprehend how simple it can be when broken down like this instead of working out how to get 3 different curves in to a single piece of metal, I'm beginning to look forward to starting on my Mustang which several people have said it's not worth it or possible! I look forward to proving them wrong.. Thanks Tony
Drinking coffee watching this trying to get inspired to fabricate and weld in patch panels on my 87 Dakota. I wire wheeled the loose rust out last night so I’m committed now.
Done and painted yesterday around 3:00. Went well. But it warping because I rushed it. Could have used another skim coat of filler but I’m satisfied. Matched the paint close enough with some spray paint. Maybe do the rockers next weekend.
Another great video Fitzee. Thank you for identifying the proper sequence to assembling the pieces and the explanation of using the larger gauge of metal versus smaller.
Fitz, your the best! Love the tips and basic approach. Your approach takes away so much of the mystery of working with sheet metal. I am working on a 55 chev 4 door to 2 door conversion and your vids help so much. Thank you. PS, me ol gramma was born and raised in St Johns.
@@quickturn66 Yes I saw his vids. Not too helpful to me though. I just can stand someone doing everything so half assed. "Meh, whatever, close enough" just doesn't cut it. Why do it if your not gonna do it right? I mean he can whip some work out but none of it is quality. Double stick taping trim on a tri5 is criminal. Lovet speed shop was way more helpful for the conversion.
@@oceanofmotion6766 I wasn't sure of the type of conversation you were doing quality wise but it's nice to watch someone else chop stuff up before you chop your own stuff up ,at least you get a preview of what's in there I'm sure there are others doing this conversation more perfectly.
I want to thank Fitzee for his vids and especially this one. I am not a welder or metal fabricator but using some sheet metal from an old furnace body. a hammer and my rather imperfect welder I managed to copy {more or less} this procedure. The rusted out wheel arch on my ranger looks pretty good. Not even the local body shop wanted to tackle it. Hats off to you Fitzee Thanks Eric
I keep on coming back to you. Just bought my first welder so I can work on my own and family's car. You simplify everything and your tips are the best. Keep up your ork. I only subscribed the other day. Congrats on your 100k
Indeed yes 48Dodger but they haven't improved Fitzees Rugged looks much ;) Its Okay Fitzee, We are here for your skills not your good looks! :D :D :D #TotallyInJest I have no ability to comment on peoples looks
Fitzee, you truly are a master metal craftsman and a great teacher. Thanks again for sharing your knowledge. All with basic tools. I would love to see a dog leg repair too
Fitzee your ability to teach is just as impressive as your ability to repair these old rusty cars. I love every video, they’re jam packed with excellent information. Thanks for sharing your skill. I have an old Toyota pickup and you’ve given me some direction with making some patch panels for it this spring. 🤔
Thank you💕! After watching a couple of your vids I manage to repair two rusty kickerpanels and a wheelarch. With quite good result for a rookie I think. My neewbie welding in thin old metall with a fluxcore has made me an excellent grinder 😉👍
Still binge watching ya vidyas from way back. I like the presentation skills - humble, sensible home made tools, very logical, crafty, creative, can do attitude and again very humble. one of my favorite channels. I'm Stickin' roun'......
Fitzee, many thanks for the tips and more importantly giving me the game plan for how to repair the rear inner wheel house/arches on my 1993 Dodge Dakota 4X4. Would really like to see how you do this in a future video. There are no replacement inner wheel house/arches (inner fender wells) out there that I am aware of, only the external wheel arch patch skins, which I have. Looks like I will have to make the inner wheel houses myself. Again, thanks for all the great knowledge and practical explanation.
You are like the father, uncle, grandfather alot of us would've liked to have to learn from and work with please don't stop making videos I know it's hard sometimes to edit videos or it becomes a chore but you give us confidence to tackle our own projects I have a first gen honda civic hatchback that I'm working on that the metal work needed it's all on the tricky hard areas and doing things on it step by step how you teach us is so much easier thank you so much for your knowledge and help....By the way I used STEEL RUBBER PRODUCTS to get all the weather stripping on this car I'm sure you'll find some for yours there great people.
Thanks Fitzee, I'm doing my c10 wheel well patch panel and lower door skins on my channel using all the knowledge Ive gained from you. I'm more of a Mechanic but enjoying the bodywork so far!
Great video! I have to do a similar repair on a ‘59 Galaxie. I was initially thinking about doing a basic repair and then covering it it up with a set of cruiser skirts. I think I’m gonna give this method a try.
Another great video!! I must admit it looked difficult and I was thinking I have no idea how or where to even start. You make it look so easy! So simple and methodical! Thank you so much for the knowledge! 👍
Really enjoying the Corolla, very much in line with the rusty stuff a lot of us work on in Ireland! There is nothing that rusts like a late 70s Toyota!
I'm sticking around, can't wait for you to tackle the quarter glass section.I have a beetle waiting,thanks for making it so easy for me.You are a great educator
The algorithm sent me and I expected the usual „Slap fiberglass on, bondo it and You’re good to go!“. I couldn’t be more wrong. This was actually very, very good 👍.
Love your approach to handling various aspects of metalworking and using basic tools when possible. You are a great teacher and the finished product is just amazing. Thank you, and dont change a thing!
I'm really enjoying the multiple videos in one week. I know you're busy but I can honestly say I enjoy watching you work. I love the fact you keep it simple for us just starting out. You are a true master at what you do sir, keep up the great work.
I can’t wait to see this car done. Another amazing lesson, thank you. I have a ‘62 econoline van and will be using many of these techniques on it this summer.
On an old vehicle like that especially because there's not that many advanced curves on those econolines... it's like the more gradual you move on every decade, the more curves the vehicles have even more so than they did in the 50s. Not including 70s and 80s but the 90s.
The more I watch your channel, the more impressed I am with your skill & technic. I have run across a few other channels that do rust repair & have noticed while they get the rust removed, many fo them have to use a ton of filter to get the outside of the panel straight. The extra time you use making your panels pay hugh dividends in the final result. As mention before I come from a fifty year automotive background. But the time used to prep the surface & clean bolt holes before the assembly, results in a much better, cleaner repair & hopefully in most cases longer longevity. Looking forward to more tips.
The tips were great and can’t wait till next time ! Truly appreciate your videos, you have already inspired me to try things I would have never considered, many thanks.
I have been looking how to do wheel arch for cheap. I have 73 charger with rusty arch. I'm in UK. Shipping Prices from USA are mad. Buing whole quarter Panel just for repair arch is simply waste of money. Definitely I will do your way. Thank you for showing this metod
Another excellent video Fitzee. As I've said before, I learn so many cool tips from watching you work.. Plus, I like the fact you do it all with basic tools. Keep 'em coming my friend.
Hello Fitzee. Another awesome video. You give me great tips to help me to repair my rusted Corolla panels as well. I am working on a 75 Corolla TE37. The parts you are after are on ebay. Search under TE31 for left hand drive or KE30 or KE55 for right hand drive. The codes are for the Corolla Model numbers. Hope this helps. Looking forward to more welding and repair tips from you. Thanks again.
@@fitzeesfabrications Yes, I have purchased them from Indonesia and also from the Philippine. Just like all aftermarket items, there is some stretch to fit. The rubbers are OK but in my opinion , the rubber doesn't hold up as well as Toyota factory Rubber parts. Its all we got so I make do with it. You may find some obsolete factory parts on the internet if you have factory part numbers. Google the part numbers. Hope this helps.
Thanks Fitzee! Your channel has helped me get the confidence to do this stuff myself! I have made two dog legs and replaced both rear quarters and tail pan in my 53 sedan using the tips you show here! Keep up the awesome work! Looking forward to more Toyota vids!
Nice work on that tricky panel, although you were fortunate that there was enough of the wheel arch left to make the job a lot easier than if it had been all rusted away. Have a look on eBay for your window rubbers. I did a quick search and there are lots of rubbers listed, but not knowing the exact model of your Corolla, I couldn't search for the exact one to fit your car. When you treat those rust pits on the panels, I would suggest that you do not use rust converter, as I've found that the rust starts up again later. It's a lot better to use a product like Deoxidine to dissolve the rust and that way it's gone. Always interesting to see how you do these repairs, lots of useful information there. All the best from Queensland Australia.
This generous man is giving us confidence, backed by knowledge. Yet, not an ounce of cockiness and always ready to learn. True master of his art.
Well said
FYI, you’re an excellent teacher. Basic tools and experience is all you need. Thanks for the tips.
I was at a stoplight today and looked over at a car with a rusted out wheel arch. I started imagining how I'd go about fixing it thanks to watching these videos all the time.
I'm 84 yr. old and your video's inspired me to try fixing the wheel arches on my Silverado. Burned my shop recently so the only body tools I have, had handles burned off. Took a one-by piece of pine and made a handle. Cut a piece out of a 55 gal barrel and proceeded to make a patch panel-- the way you taught us. Thanks for your videos.
A man that knows his trade and a master at it not intimidated to share his knowledge and talent few people can teach as this man with no pretense I have learned more from his videos tank you keep them coming
Best teacher on the internet!bravo sir
It's not often you find 1person that answers all your questions in 1 video👍
Thank you sir!!! Thank you for teaching I was going to pay a guy 7.000 for metal work, started 2 months ago myself from watching your videos. So far I spent maybe $600 thanks from Michigan
He’s that good of a teacher isn’t he! Love his videos. My favorite part is that he uses basic tools. That way it teaches us that no matter what tools we have, we can do this! With the basics, we can do anything!!!!
@@katykayy it's pretty incredible what you can do without all the big tools as someone who is just getting started with rust repair I really appreciate it
Michigan is also the reason im researching sheetmetal repair lol
Oldie but a goodie! I appreciate all you do for this art! You’ve inspired me to tackle my 84 f150 with confidence and when my confidence starts to trickle off a bit, I just watch another round of videos! Thank you!!
Fitzee, you don't just make it look easy, you make it easy for those of us learning from you. Thanks for another excellent video.
I agree, it always seems well explained and doable.....but i might still use a template 😆
@@David-uu1oj Either way. What impresses me is that he is keeping the pieces small and easily worked. All those other guys with the expensive fancy tools would have me tossing a day's work and sizable panel instead of a few minutes on a little piece after a screw-up. With the bonus that the spoiled piece serves pretty much as a template for it's replacement.
Never seen anyone build a wheel arch like that before, you cease to amaze me bud.
Love this channel and the knowledge that Fitzee has. This channel has inspired a lot of confidence in me that I can do major fab repairs with regular tools in my home garage. I have definitely started looking a body repairs from a much more basic set of eyes instead of making things way harder than they should be. Thanks for taking the time to share your years of knowledge.
Fitzee - you are my sheet metal hero, showing never giving up. Thank you so much for teaching us.
I'm just astounded on how much information is located in each video. A true master at work here
I love the fact that you show how to do advanced metal work using basic tools. Not everyone has 10K+ to invest in a shop setup.
Lord Tunderin' Jesus you done a good job Fitzee! Wish you were closer, i needs my wife's car done.
I'm repairing the rear arches on my car , this video has been has been a great help thanks for making it. You have a great skill it's giving me inspiration to get my car done.
Im well into this stuff on a 1963 galaxy convertible. rusty rockers, rusty sections on the truck lip, spots around the rear lights, rust pits on the lower rear fenders and some funky rust on other sections and an area on the floor behind the top where water channels down and sat on the original floor. all the tricks and tips I'm picking up watching these videos has given me the confidence to attack it all by myself instead of parting the work out like I've done in the past. satisfying.
I play at patching, but I always turn to your videos for the answers and confidence, thanks.
You are one of the best teachers I have seen on TH-cam I would like to thank you for your help in fabrication a man with minimal tools just like me and have of the rest of the people thanks from newbunswick
I have a repair I need to do on the rear wheel wells of my 2004 F-150. I've done this repair in the past, but I will follow your technique instead of cutting out the bad metal and remaking that portion. Thanks for sharing your knowledge and wisdom; your channel is among my favourite content in all of TH-cam!
You are truly a 'Master of Metal' ! and a great teacher. You've shown that one can have excellent results without spending thousands of dollars on specialized equipment. I've learned a lot from you - thank you !
Stunning! You make me feel like I should be able to fix my husk of a 1970 Ford within a week! Excellent as always!
Metal master as usual, Fitzee!! Beautiful work.. Love how you do it in pieces..
You don't waste any time Fitzee. Great lesson on how to repair a rusted out wheel well arch. Thanks for sharing your expertise and tips!
Thank you Fitzee for this informative video. I often revisit it while contemplating whether to buy new panels or to repair the damaged parts myself. Similar to other videos you've made, my fender has a double layer of sheet metal. The straightforward choice would be to purchase new fenders, but the more engaging and educational option is to undertake the fabrication myself, gaining valuable experience. I'm confident this hands-on practice will be beneficial in my engineering studies. Your videos are greatly appreciated.
Hi Fitzee, You know how to explain the issues you can get into while doing this body repairs. Great video again. Thanks for spending so much time to make this content. 👍
Great work!! Roughly how much would a quality repair such as that cost???
Just bought a rusted out car that needs a lot of welding work and I'm so glad I found this channel because I have never done body work before. Should be a big help and should save me a lot of frustration to have a plan going into it.
The most useful and informative DIY bodywork channel on TH-cam. Thank You.
I have not seen anyone do such art on a car since I was in school. The shop instructor teaching the another shop did work on his own car and I always told people you could not tell where he patched before it was painted. You my friend are an artist, my hat is off to you.
Nice work on the wheel arch. I like seeing the patch panels being made with basic hand tools.
good stuff! The boys first car is a 1967 Cougar and we are working on restoring it for his 16th birthday in a year from now. This series of instructions is giving us confidence to do proper body repairs - thanks for sharing your experience Fitzee...
I really enjoy your videos. Yesterday I repaired a quarter panel using your methods. They work well but I need more practice. Good thing I got lots of time to learn before I start rebuilding my 1940 Chrysler Royale
Thanks for an excellent Ezy to follow video, all I have to do now is copy your work. Your a great man sharing your knowledge with us. Cheers from Australia, mate.
Just describing your metalworking skills as “wonderful” would be a gross understatement. Big respect to you buddy! 👍🙏
Just the video I was looking for to repair the rear fender edge on a 2003 Blazer! Unfortunately I'm missing a chunk of the bottom piece that marks the original curve of the opening, so I think I'll replace that first, using the other side to make sure the curve is correct front to back. Thanks again for another great video!
Also love you attitude about the unexpected rust. "More videos." :)
I just bought myself a 1980 4 door Corolla and she is riddled with the usual rust, very happy to be following you Fitzee cheers
Brother you need to come to Texas! It's rare to see cars that rusty. You'd still have plenty to do, but wouldn't have to spend so much of your talents fixin' holes. THANK YOU though, for sharing your skills. You're an inspiration!
I really like watching and learning different techniques of working the metal. Your out of the box style and ideas are great....
Best metalsmith/body man on the 'Net (ioho), and it's nice to be able to share these vids with young kids w/out fear of 'f bombs' and other salty language being hurled about. Fitzee has motivated us into confidently tackling that rusty, rounded, forward roof portion on our horse trailer. Thank you, Fitzee!
Thanks Fitzee. I’m just after cutting out the bed sides on my Dakota to patch in new outer arches and found the wheel houses or inner fenders or whatever all rusted out. So I’ve been patching new metal into there. I don’t much care what the welds look like up inside the fender, who’s going to look up in there when she’s right side up- but where the outer skin attaches to the inner needs to be smooth. So I used your cut and butt method and it works a damn sight better than what I was doing before. I’m going to be using all your methods to get this done. It’s my first attempt at body work. I started on the inner parts of the box so I could practice welding before moving onto the outer parts. Eventually I’m doing all the rockers and cab corners when the box is done. My friends think I’m nuts but you knows it’s cheaper than buying another truck- even a decent used one.
Every video blows me away, I still find it difficult to comprehend how simple it can be when broken down like this instead of working out how to get 3 different curves in to a single piece of metal, I'm beginning to look forward to starting on my Mustang which several people have said it's not worth it or possible! I look forward to proving them wrong.. Thanks Tony
I think you’re starting to really enjoy this teaching. Thanks again, lovely repair.
It appears factory to my eyes. Great job. I very much appreciate your videos.
Drinking coffee watching this trying to get inspired to fabricate and weld in patch panels on my 87 Dakota. I wire wheeled the loose rust out last night so I’m committed now.
I’m out in the garage right now. About to do my first “cut and butt”
Half way through the cut and butt. It’s going better then I expected
Done and painted yesterday around 3:00. Went well. But it warping because I rushed it. Could have used another skim coat of filler but I’m satisfied. Matched the paint close enough with some spray paint. Maybe do the rockers next weekend.
Another great video Fitzee. Thank you for identifying the proper sequence to assembling the pieces and the explanation of using the larger gauge of metal versus smaller.
Fitz, your the best! Love the tips and basic approach. Your approach takes away so much of the mystery of working with sheet metal. I am working on a 55 chev 4 door to 2 door conversion and your vids help so much. Thank you. PS, me ol gramma was born and raised in St Johns.
Did you see DandD speed, he’s done a couple of them
@@quickturn66 Yes I saw his vids. Not too helpful to me though. I just can stand someone doing everything so half assed. "Meh, whatever, close enough" just doesn't cut it. Why do it if your not gonna do it right? I mean he can whip some work out but none of it is quality. Double stick taping trim on a tri5 is criminal. Lovet speed shop was way more helpful for the conversion.
@@oceanofmotion6766 I wasn't sure of the type of conversation you were doing quality wise but it's nice to watch someone else chop stuff up before you chop your own stuff up ,at least you get a preview of what's in there I'm sure there are others doing this conversation more perfectly.
I want to thank Fitzee for his vids and especially this one. I am not a welder or metal fabricator but using some sheet metal from an old furnace body. a hammer and my rather imperfect welder I managed to copy {more or less} this procedure. The rusted out wheel arch on my ranger looks pretty good. Not even the local body shop wanted to tackle it.
Hats off to you Fitzee Thanks
Eric
I keep on coming back to you. Just bought my first welder so I can work on my own and family's car.
You simplify everything and your tips are the best. Keep up your ork. I only subscribed the other day. Congrats on your 100k
Looks great man! The new lights make the video look awesome!
Lol...good point about the new lights!
Indeed yes 48Dodger but they haven't improved Fitzees Rugged looks much ;)
Its Okay Fitzee, We are here for your skills not your good looks! :D :D :D
#TotallyInJest I have no ability to comment on peoples looks
I hope so! Lol. Havent got 65000 subscribers cause of my good looks thats for sure! Hahaha
@@fitzeesfabrications ah now Fitzee I couldn't possibly comment ;)
Try steele rubber products
Fitzee, you truly are a master metal craftsman and a great teacher. Thanks again for sharing your knowledge. All with basic tools. I would love to see a dog leg repair too
Awesome work! That looks really good.>>>You are a true craftsman>>>Your videos never cease to amaze me>>>
Fitzee - The man, the myth, the legend. Another great video.
A truly gifted artisan with exceptional teaching abilities -thank you very much ✅👍
Fitzee your ability to teach is just as impressive as your ability to repair these old rusty cars. I love every video, they’re jam packed with excellent information. Thanks for sharing your skill. I have an old Toyota pickup and you’ve given me some direction with making some patch panels for it this spring. 🤔
Thanks a million, very well done. I've got a project that will need some work just like that and your video has made it seem possible to do it myself.
Thank you💕! After watching a couple of your vids I manage to repair two rusty kickerpanels and a wheelarch. With quite good result for a rookie I think. My neewbie welding in thin old metall with a fluxcore has made me an excellent grinder 😉👍
Fitzee, The Body Genius. No Body too Tough To Tame! Thank you Sir for sharing your genius with us amateurs! AWESOME JOB as always!
Still binge watching ya vidyas from way back. I like the presentation skills - humble, sensible home made tools, very logical, crafty, creative, can do attitude and again very humble. one of my favorite channels. I'm Stickin' roun'......
That's a really nice clean looking patch ,sure beats patching with pop rivets. Very nice work
Another great vid Fitzee we all hope you " stick around" for a lot of years.
"Blowing holes in thinner metal, ask me how I know" Yes indeed! Fitzee you are amazing!
You never cease to amaze me , I like your work . Thanks, God Bless!!!
You are a master in the craft, thank you sir, hopefully I could use what I've learn in my upcoming project
Thank you sir! We could learn a lot from your videos, greetings from Argentina!
Fitzee, many thanks for the tips and more importantly giving me the game plan for how to repair the rear inner wheel house/arches on my 1993 Dodge Dakota 4X4. Would really like to see how you do this in a future video. There are no replacement inner wheel house/arches (inner fender wells) out there that I am aware of, only the external wheel arch patch skins, which I have. Looks like I will have to make the inner wheel houses myself. Again, thanks for all the great knowledge and practical explanation.
You are like the father, uncle, grandfather alot of us would've liked to have to learn from and work with please don't stop making videos I know it's hard sometimes to edit videos or it becomes a chore but you give us confidence to tackle our own projects I have a first gen honda civic hatchback that I'm working on that the metal work needed it's all on the tricky hard areas and doing things on it step by step how you teach us is so much easier thank you so much for your knowledge and help....By the way I used STEEL RUBBER PRODUCTS to get all the weather stripping on this car I'm sure you'll find some for yours there great people.
Thanks Fitzee, I'm doing my c10 wheel well patch panel and lower door skins on my channel using all the knowledge Ive gained from you. I'm more of a Mechanic but enjoying the bodywork so far!
Great video! I have to do a similar repair on a ‘59 Galaxie. I was initially thinking about doing a basic repair and then covering it it up with a set of cruiser skirts.
I think I’m gonna give this method a try.
Another great video!!
I must admit it looked difficult and I was thinking I have no idea how or where to even start.
You make it look so easy!
So simple and methodical!
Thank you so much for the knowledge!
👍
Really enjoying the Corolla, very much in line with the rusty stuff a lot of us work on in Ireland! There is nothing that rusts like a late 70s Toyota!
exellent job making patch panels using basic tools, you are a great teacher. Thanks for all the tips.
I'm sticking around, can't wait for you to tackle the quarter glass section.I have a beetle waiting,thanks for making it so easy for me.You are a great educator
Your knowledge is amazing I love how you explain what you're doing completely that turned out really nice thanks for the video
The algorithm sent me and I expected the usual „Slap fiberglass on, bondo it and You’re good to go!“. I couldn’t be more wrong. This was actually very, very good 👍.
Your the best ! A grinder and a mig welder . Thanks learned a lot .
Wow. Wouldn’t have known that there was a big rust hole there. Great tips. I’m really enjoying your channel. Thanks for sharing.
Love your approach to handling various aspects of metalworking and using basic tools when possible. You are a great teacher and the finished product is just amazing. Thank you, and dont change a thing!
I'm really enjoying the multiple videos in one week. I know you're busy but I can honestly say I enjoy watching you work. I love the fact you keep it simple for us just starting out. You are a true master at what you do sir, keep up the great work.
I can’t wait to see this car done. Another amazing lesson, thank you. I have a ‘62 econoline van and will be using many of these techniques on it this summer.
On an old vehicle like that especially because there's not that many advanced curves on those econolines... it's like the more gradual you move on every decade, the more curves the vehicles have even more so than they did in the 50s. Not including 70s and 80s but the 90s.
I do watch other metal fab guys. Yours are the simplest and easy to follow thru with. Thanks, Fitz!
Great vid as usual, Tony. It's definitely coming right along and the shop lighting was a great upgrade!
Fitz...your work is FANTASTIC!!
The more I watch your channel, the more impressed I am with your skill & technic. I have run across a few other channels that do rust repair & have noticed while they get the rust removed, many fo them have to use a ton of filter to get the outside of the panel straight. The extra time you use making your panels pay hugh dividends in the final result. As mention before I come from a fifty year automotive background. But the time used to prep the surface & clean bolt holes before the assembly, results in a much better, cleaner repair & hopefully in most cases longer longevity. Looking forward to more tips.
The tips were great and can’t wait till next time ! Truly appreciate your videos, you have already inspired me to try things I would have never considered, many thanks.
I have been looking how to do wheel arch for cheap. I have 73 charger with rusty arch. I'm in UK. Shipping Prices from USA are mad. Buing whole quarter Panel just for repair arch is simply waste of money. Definitely I will do your way. Thank you for showing this metod
Thanks again for the great tips . Waiting on the next one. You do great work and teaching.
Man, this channel has helped me so much! Thanks brother 👌
Same bro... I’m following along on ur 65 can’t wait till ur done 💪🏻
@@Mongonader thanks brother I appreciate the support 🙏
I commented above. Sounds like he saw your video which is awesome.
It really did come out nice.
The tips are always great. Keep them coming. Thanks so much !
Another excellent video Fitzee. As I've said before, I learn so many cool tips from watching you work.. Plus, I like the fact you do it all with basic tools. Keep 'em coming my friend.
Another excellent metal work video. I wish I had access to this kind of thing when I (ameteur builder) restored my '68 Chevelle.
Always enjoyable and your voice is so wonderful I am able to learn more because I stay as relaxed listening to your relaxed teaching style.
These videos are a wealth of knowledge. Thank you for taking the time to make them. Subscribed.
Hello Fitzee. Another awesome video. You give me great tips to help me to repair my rusted Corolla panels as well. I am working on a 75 Corolla TE37. The parts you are after are on ebay. Search under TE31 for left hand drive or KE30 or KE55 for right hand drive. The codes are for the Corolla Model numbers. Hope this helps. Looking forward to more welding and repair tips from you. Thanks again.
Have you bought the suff off ebay? Looking to find out what it is like for fit and finsh
@@fitzeesfabrications Yes, I have purchased them from Indonesia and also from the Philippine. Just like all aftermarket items, there is some stretch to fit. The rubbers are OK but in my opinion , the rubber doesn't hold up as well as Toyota factory Rubber parts. Its all we got so I make do with it. You may find some obsolete factory parts on the internet if you have factory part numbers. Google the part numbers. Hope this helps.
I can watch these videos all day. So awesome.
You make that look so easy. Another great video. She's looking sharp!
Clearly, this man is an artistic genius!
I am impressed!!
Great stuff as always Fitzee! This channel is GOLD - so many good lessons to learn from. THANK YOU!
Thanks Fitzee! Your channel has helped me get the confidence to do this stuff myself! I have made two dog legs and replaced both rear quarters and tail pan in my 53 sedan using the tips you show here! Keep up the awesome work! Looking forward to more Toyota vids!
Nice work on that tricky panel, although you were fortunate that there was enough of the wheel arch left to make the job a lot easier than if it had been all rusted away. Have a look on eBay for your window rubbers. I did a quick search and there are lots of rubbers listed, but not knowing the exact model of your Corolla, I couldn't search for the exact one to fit your car. When you treat those rust pits on the panels, I would suggest that you do not use rust converter, as I've found that the rust starts up again later. It's a lot better to use a product like Deoxidine to dissolve the rust and that way it's gone. Always interesting to see how you do these repairs, lots of useful information there. All the best from Queensland Australia.
That was a difficult scratch built panel to make! Well done Fitzee! Cheers, Doug