How to maintain and clean the robotic vacuum cleaner | Coredy robot R650 R500+ R550 R700 R750 R580
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- This article covers the most important maintenance tips for maintaining your robot, so that it will last for years.
👉🏻shop.coredy.co...
1️⃣Sensors
2️⃣Washable Filters
3️⃣Wheels
For the next iteration please add more screws
Thanks for the feedback
exactly!
Wheel fault? Beeps 10 times with solid red light. After going in some circles loudly, I should add.
I got the same problem. I have tried several things like to clean the main brush included the ball-bearing, cleaning the front wheel etc. nothing worked. Have you found a solution?
What are "Main Extractors" I'm getting 4 beeps that indicates the "Main extractors cannot move"
Thank you for the helpful video. What kind of screwdriver is that and where can I find one?
Hi, it's the 3X100 mm screwdriver which is common in any hardware store. We also have mentioned to the caption in the updated video.
@@CoredytechOfficial That is not a manual screwdriver what is the driver? I see its plugged in.
İ need to clean the wheels as chewngum got stack and melted 😭😭
How about the front wheel??
The robot stops after 2 minutes. There were 3 beeps with flashing red. After cleaning it stops after 30 seconds and no beeps/lights
Did you find a solution mine is doing the same 😔
Any ideas what to do if water is not coming out the mop?
Is there a way to factory reset this vacuum? Mine is now turning on by itself without any setting via bluetooth or any apps, or the remote... It's like it's possessed. How do I return it to its default factory settings?
My Coredy R750 ran over some dookie now it doesn't start.
Is it possible to disassemble the main brush assembly? I cleaned the brush but it no longer rotates when in use. No torque at all
How can I clean the little front wheel? Is it removable? It has a bunch of dog hair trapped in/around it and I can't seem to get it out.
It just pops out, put a little screwdriver between the metal axle and the wheel and pry it out. It then just takes a firm press to put it back it. Blow some compressed air in there too if you can, you won’t believe the amount of fluff that comes out.
@@robj3857 Thanks - I'll give that a try!
@@robj3857 e
Why does my 750 make so much noise. It’s a loud grinding almost. I have only had it 4 mths
Why has my R500+ gotten so LOUD recently? The vacuum still works but the vacuum or fan has gotten so loud I may have to replace it. It's only ~18 months old....???
Mine too, if you found out what it was please tell me. I love the robovac otherwise.
@@alisonryan706 They wanted me to give them more money and repair it myself.
@@MrJDOaktown thank you. Interestingly it's doesn't really do it as much on the carpet but always on the hard floor.
The same thing happened to me. I cleaned the sides of the brush and where the brush attaches, and it got better for a few days. But now the sound is back. In my case, it definitely sounds like a brush problem. I'll probably try and replace the brush soon.
My main roller brush appears to be stuck in my robot. According to this video it should come out very easily. Any tips on how to remove it to be able to clean it?
Did you ever figure it out? I have the same issue.
Mine won't recharge.. I cleaned it and emptied it. When it goes back to the docking station it charges for about a minute.. the light then turns red.. Any suggestions?
I'm having the same issue. It charges for a minute then blinks red and beeps 4x. I cleaned everything including the docking station but still having the same issue.
@@tomrocketpants You probably need to replace the main battery. $30 on the coredy website. If you read the instruction manual, it mentions that the battery needs to be replaced every 6-12mos.
My robot keeps spinning in circles, goes a foot then spins again. Anyone know why is does that or how to fix it? It’s a r650
Im.having the same problem did u fix it?
@@amayranihernandez4172 no i never did fix it
I fix mine but because it had a Ballon stuck inside the wheel
For me it was the bumper bar at the front that stopped springing out. If you push in the front it should spring back really well. If not it thinks it’s pushed in on one side and spins in circles and then errors out. Take off the bumper as shown in the video. You’ll see the metal spring on the front with two spring bars. Bend them back out so they stick out at about 75 degrees from the front of the hoover. Put the bumper bar back on, screw it up and mine worked again perfectly.
Would be way more helpful if actually showed anything rather than just saying what’s already in the instructions…
DO NOT BUY THIS! Amazon sent me a replacement and it broke after few months of use